• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.104-112
• /
• 2011

During the ground operation of Korean army, the voice message is mainly used for exchanging informations related to the surveillance and reconnaissance, command and control, and precision strike. However, in order to the battlefield visualization among fighting powers participating in the ground force operation, automatic situational awareness and variable message format (VMF) for command and control are required. For securing core technologies necessary for the battlefield visualization, message standard and message handler are established through several applied researches. Besides, the VMF for equipping a weapon system is in development. In this paper, a study on the Korean variable message format (KVMF), where interoperability of integrated battle management system (BMS) is guaranteed due to performing joint, ground, and combined operations so that the situation awareness and strike system can be automated in almost real time, is presented. From the modeling and simulation (M&S) results of the message processor, delay time is varied in accordance with the number of nodes in unit platoon network, message length, and generation interval of routine messages. Therefore, it is shown that the system performance can be optimized by establishing proper network protocol for each situation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.485-487
• /
• 2017

With the growth of the IoT, security is a growing concern. Things the risk of IoT security has been constantly raised, and there have been many cases of hacking. As a result, there is a growing concern and scale about security, but there is a lack of interest and research on the message protocols between Iot devices. With the development of the IoT, the importance of low-power, lightweight and accurate message delivery will become more important and more advanced message protocols will be needed. In this paper, it is aimed to construct the system for communication between client and server of MQTT and CoAP with Confirmative option, which are most used among IoT message protocols and compare the message reliability of each communication protocol to check efficiency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.765-768
• /
• 2007

In this paper, the security evaluation method about mobile web services message is suggested in the method for improving the safety an reliability about the mobile web services message. In order that the goal of this paper is accomplished, the security threat and the security vulnerability which can be occurred in the mobile web services message are defined. The evaluation method for performing the security evaluation about the mobile web services message is defined. Also, the requirements for the mobile web services message security evaluation are defined. Finally, the evaluation framework for performing the mobile web services message security evaluation is constituted, and the evaluation scenario example is suggested. By using the mobile web services message security evaluation defined in the paper, before the mobile web services is deployed, the security threats and security vulnerability can be verified. Also, the countermeasure for the security threat and security vulnerability discovered in the verification result can be prepared. Therefore, the sorority and reliability about the mobile web services can be improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.568-577
• /
• 2017

IEEE Std 1609.2 was defined for the support of communication security functions in the WAVE (Wireless Access in Vehicular Environments) system. IEEE Std 1609.2 defined the message structures of the security services and managements on the vehicular communication by using ASN.1 (Abstract Syntax Notation One). Also, this security message structures shall be encoded using the COER (Canonical Octet Encoding Rules). In this paper, we designed and implemented the IEEE Std 1609.2 message encoder/decoder handling the security messages defined in IEEE Std 1609.2. The designed encoder/decoder consists of three modules as follows : a module generating the message of C language data structures in accord with IEEE Std 1609.2 message structures, a message encoder module, a message decoder module. And the encoder/decoder was implemented on the Linux environment. Also we analyzed the performance by measuring the performance speed of the encoder/decoder implemented.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.41-46
• /
• 2003

Because the quality of a radio link in real environment is generally varied with time, there is a difference between the delay in the real environment and one obtained from the analytic model where a time-varying link model is not used as a link model for a Bluetooth. This paper analyzes the transmission delay of a message in the time-varying radio link model for the Bluetooth. The time-varying radio link is modeled with a two-state Markov model. The mean transmission delay of the message is analytically obtained in terms of the arrival rate of the message, the state transition probability in the Markov model, and the packet error rate.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.84-93
• /
• 2009

This paper focuses on message complexity performance analysis of mobile ad hoc network (MANET) address autoconfiguration protocols (AAPs) in reference to link errors generated by mobile wireless nodes. An enhancement was made using a proposed retransmission limit, S, to be computed for error recovery (based on the link error probability), to measure message complexity of AAPs in reference to the link error probability, $P_e$. The control procedures for the retransmission limit have been included for each of the AAPs. Retransmission limit control is critical for efficient energy consumption of MANET nodes operating on limited portable energy. O-notation has been applied to analyze the upper bound of the number of messages generated by a MANET group of nodes. The AAPs investigated in this paper are strong duplicate address detection (DAD), weak DAD with proactive routing protocol (WDP), weak DAD with on-demand routing protocol (WDO), and MANETConf. Each AAP reacts different to link errors, as each AAP has different operational procedures. The required number of broadcasting, unicasting, relaying, and received messages of the nodes participating in a single-node joining procedure is investigated to asymptotically calculate the message complexity of each AAP. Computer simulation was conducted and the results have been analyzed to verify the theoretical message complexity bounds derived. The message complexity of WDP was lowest, closely followed byWDO, based on the simulation results and analysis of the message complexity under nominal situations. The message complexity of MANETConf was higher than WDO, and strong DAD resulted to be most complex among the four AAPs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.857-865
• /
• 2020

This paper presents a method for code generation of UML sequence diagrams based on message patterns. In the sequence diagrams, it is shown that messages are some types of forms typically. This paper classifies according to type as three patterns, and construct meta-information for code generation analysing structural infomation for each patterns. The meta-message of structural information (MetaMessage) is stored in the MetaMessage datastore and the meta-method information from the MetaMessage is stored in the MetaMethod datastore. And then, the structural information of MetaClass and MetaObject is constructed in each datastore too. For each pattern, this paper presents a method for code generation based on the meta information of message patterns and the syntax of target progamming language. Also, branching and looping that has been seldom handled integratedly in the previous works are handled as same as the basic patterns by classifying the branching pattern and the looping pattern for code generation integratedly.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.135-146
• /
• 2022

In GNSS, the structure of the navigation message has been improved to increase the flexibility of data addition and transmission, and the robustness of message reception in a low SNR environment. GNSS signals currently being broadcast have a different message structure from each other, and the structure can be largely classified into the fixed structure, the packetized structure, and the packetized and fixed pattern structure. This paper analyzes the features of these three types of structures and compares the performance using the indicators. It can be seen that the performance after adopting the packetized structure is superior to those of other structures. In particular, there has been remarkable improvement in terms of the message management and transmission efficiency.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.131-135
• /
• 2024

In the MQTT protocol, if the retained flag of a message published by a publisher is set, the message is stored in the broker as a retained message. When a new subscriber performs a subscribe, the broker immediately sends the retained message. This allows the new subscriber to perform updates on the current state via the retained message without waiting for new messages from the publisher. However, sending retained messages can become a traffic overhead if new messages are frequently published by the publisher. This situation could be considered an overhead when new subscribers frequently subscribe. Therefore, in this paper, we propose a retained message delivery scheme by considering the characteristics of the published messages. We model the delivery and waiting actions to new subscribers from the perspective of the broker using reinforcement learning, and determine the optimal policy through Q learning algorithm. Through performance analysis, we confirm that the proposed method shows improved performance compared to existing methods.

• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.733-740
• /
• 2006

Spam Message has been Causing widespread damages on the Internet. One source of the problems is rooted from an anonymously posted message in the bulletin board in Internet communities. This type of the Spam messages tries to advertise products, to harm other's reputation, to deliver religious messages and so on. In this paper we present the Spam message filtering using the Bayesian approach. In order to increase usefulness of the Spam filter in the bulletin board in Internet communities, we made the Spam filter which can divide the Spam message into six categories such as advertisement, pornography, abuse, religion and other. The test conducted against messages posted on the popular web sites.