• 대한치과교정학회지
• /
• 제15권1호
• /
• pp.115-121
• /
• 1985

This study was intended to investigate the effect of mesiodistal crown widths of the anterior teeth on the incisor relationship and to determine whether incisor width ratio and anterior width ratio could be used to assess interarch tooth width harmony. From the casts taken from 63 subjects, 26 of open bite, 18 of deep bite and 19 of normal over bite with age of 17-20, mesiodistal crown widths of maxillary and mandibular 6 anterior teeth were measured with Boley gauge. On the basis of tooth measurements, anterior and incisor width ratio were calculated. The cephalograms were taken from same subjects to measure the degree of over bite and over jet and to compare the craniofacial bony structures between open bite, deep bite and normal over bite. Correlations among the anterior width ratio, incisor width ratio, over bite and over jet were calculated. The results were as follows. 1. There were no differences in mesiodistal widths of anterior teeth, incisor width ratio and anterior width ratio between open bite, deep bite and normal over bite. 2. The incisor width ratio and anterior width ratio can be useful in the assessment of tooth width harmony because the incisor width ratio and anterior width ratio were stable statistically and significantly correlated with each other. 3. Over bite and over jet were not correlated with incisor width ratio and anterior width ratio.

• 대한치과교정학회지
• /
• 제15권1호
• /
• pp.67-74
• /
• 1985

The primary objective of this study is to make the prediction percentile tabulation of the sun of mesiodistal width of the unerupted permanent canines and premolars derived from the sum of mesiodistal width of the erupted permanent mandibular incisors in Korean population. The subjects were 316 individuals with normal occlusion aged 11 to 23 years. The sum of mesiodistal width of mandibular incisors, and the sum of mesiodistal width of maxillary canine, first and second premolars, and the sum of mandibular canine, first and second premolars were measured from the dental cast models using the sliding caliper (Mitutoyo Co.). From the study, the results are as follows: 1. The sum of M-D width of mandibular incisors and the sum of M-D width of maxillary canines, first and second premolars, and the sum of M-D width of mandibular canine, first and second premolars were smaller than those of American Caucasians and Negros. 2. The correlation coefficient between the sum of M-D width of mandibular incisors and that of maxillary or mandibular canines, first and second premolars was found to be 0.598 and 0.586, respectively. 3. The regression constants were determined to evaluate the sum of M-D width of the unerupted permanent canines and premolars derived from the sum of M-D width of the erupted permanent incisors. 4. The prediction percentile tabulation were made in an attempt to predict the total M-D width of the unerupted permanent canines and premolars derived from the total M-D width of the erupted permanent mandibular incisors.

• Imaging Science in Dentistry
• /
• 제32권2호
• /
• pp.89-97
• /
• 2002

Purpose: The objective of this study is to find the differentiating characteristics of ameloblastomas and odontogenic keratocysts of the jaw by analyzing computed tomography (CT) images of the lesions, clarify radiological characteristics associated with jaw lesions, and to make a diagnsis based on these findings. Materials and Methods : Test subjects were chosen among the patients who were diagnosed as having an odontogenic keratocyst or ameloblastoma at the Yonsei University Dental Hospital from January 1996 to December 2000 and had CT scans taken preoperatively. The subject pool was comprised of 51 cases of odontogenic keratocyst and 37 cases of ameloblastoma. The following measures were used for image analysis of the lesion: the anatomic location, CT pattern, mesiodistal width, buccolingual width, the ratios between mesiodistal width and buccolingual width, height, CT number, homogeneity of radiodensity, the appearance of a sclerotic rim, continuity of adjacent cortical bone, and displacement and resorption of adjacent teeth. Results: Comparing the CT patten, mesiodistal width, buccolingual width, height, CT number, homogeneity, appearance of sclerotic rim, continuity of adjacent cortical bone, there were statistically significant differences between ameloblastoma and odontogenic keratocyst test subjects (p<0.05). Comparing the ratios between mesiodistal width and buccolingual width, displacement and resorption of adjacent teeth, there were no statistically significant differences (p>0.05). Conclusion: We compared odontogenic keratocysts and ameloblastomas in CT scans. They occurred most frequently in the posterior to the ramus of the mandible. The findings of patterns of the CT images showed that size and border of lesions were more aggressive in ameloblastomas than in odontogenic keratocysts. The internal contents represented an increased attenuation area (IAA) in odontopenic keratocyst. Odontogenic keratocysts were shown to have higher CT numbers than ameloblastomas.

• The Journal of Advanced Prosthodontics
• /
• 제8권2호
• /
• pp.125-130
• /
• 2016

PURPOSE. The purpose of this study was to determine the effect of changes in the horizontal plane angle on the mesiodistal width ratios of the maxillary anterior teeth during the acquisition of frontal view photographs, derive these ratios for Korean adults on the basis of the data obtained, and analyze them using the Golden Proportion as a reference. MATERIALS AND METHODS. In experiment I, 30 plaster casts were mounted on an articulator and positioned on the angle-measuring device with a center setting of $0^{\circ}$. The device was rotated to $10^{\circ}$ in $1^{\circ}$ increments in a counterclockwise direction. At each angle, photographs were obtained and analyzed. Experiment II was based on 60 patients who visited the Department of Prosthodontics at Kyungpook National University Dental Hospital from February 2012 to February 2015. The patients were divided into three groups [Male (M), Female (F), Total (M + F)]. Frontal views were obtained for all groups and analyzed. RESULTS. From $1^{\circ}$ to $10^{\circ}$, the relative mesiodistal width ratios for the maxillary anterior teeth showed no significant differences from those at $0^{\circ}$. In all three groups, the relative width ratio of the maxillary central incisor was smaller than that specified in the Golden Proportion; the opposite was true for the canine. CONCLUSION. Our results suggest that the mesiodistal width ratios of the maxillary anterior teeth do not follow the Golden Proportion in Korean adults, and that a change in the horizontal plane angle from $1^{\circ}$ to $10^{\circ}$ during frontal photography does not affect these ratios.

• 대한치과교정학회지
• /
• 제41권3호
• /
• pp.184-190
• /
• 2011

하악 절치부에서 보이는 총생은 하악 절치의 큰 MD/FL (mesiodistal/faciolingual) 인덱스와 관련이 있음이 보고되었다. 큰 MD/FL 인덱스를 보이는 절치에서 치간 삭제를 통해 근원심폭경을 줄여 MD/FL 인덱스를 줄이고 공간을 확보하는 방법이 정당화되기 위해서는 MD/FL 인덱스가 클수록 인접면 법랑질 두께가 더 두꺼워야 할 것이다. 본 연구의 목적은 하악 절치의 MD/FL 인덱스, 근원심폭경, 최대풍융부/치경부폭경비와 같은 치아의 형태적 요인과 인접면 법랑질 두께 사이에 상관관계가 있는지를 조사하는 것이었다. 발거된 하악 절치 40개에서 MD/FL 인덱스, 근원심폭경, 최대풍융부/치경부폭경비를 구하였으며, 근원심폭경을 구한 선상까지 순면을 연마하여 그 단면에서 법랑질 두께를 측정하였다. 치경부근원심폭경은 순면을 연마한 단면에서의 좌우측 백악법랑경계 사이의 폭경을 측정하였다. 이후 법랑질 두께와 MD/FL 인덱스, 근원심폭경, 최대풍융부/치경부폭경비의 상관관계를 조사하였다. 연구결과 하악 절치의 법랑질 두께는 편측에서 $0.75{\pm}0.07mm$였고, 근원심폭경은 $5.56{\pm}0.40mm$였다. 법랑질 두께와 근원심폭경 간에는 유의한 상관관계가 있었지만(R = 0.68), 법랑질 두께와 MD/FL 인덱스, 법랑질 두께와 최대풍융부/치경부폭경비 간에는 상관관계가 없었다. 이는 근원심폭경이 큰 치아에서는 치간 삭제를 더 많이 할 수 있지만, 동일한 근원심폭경을 갖는 절치들의 경우 MD/FL 인덱스가 큰 하악 절치 또는 최대풍융부/치경부폭경비가 커서 삼각형의 형태를 갖는 하악절치에서 치간 삭제를 더 많이 할 수는 없다는 것을 나타낸다.

• 대한치과교정학회지
• /
• 제3권1호
• /
• pp.7-13
• /
• 1972

정상 치열궁에 관한 연구는 많은 학자들에 의해 시행되어온 바 학자들 간에는 아무런 일관성이 없다는 의견과 치열궁을 대표할 만한 기하학적 곡선이 존재한다는 의견이 상충되어 왔다. 그중 후자의 이론이 지배적인 것으로 보이나 그 중에서도 곡선의 형태에 관하여서는 다시 많은 논란이 있었다. Bonwill과 Hawley등에 의한 Circle론, Black의 반타원론, Angle의 포물선론, 이외에도 많은 의견이 있는 가운데 저자는 정상교합을 유지하는 한국인 성인을 대상으로 Bonwill과 Hawley의 이론을 기초로 한 연구를 시행한 바 다음과 같은 결과를 얻었다. 1. 정상교합을 유지하는 한국인 성인의 치열은 전치에 있어서 원호에 근사한 배열을 갖는다. 2. 원의 지름은 6전치의 폭경의 합에 대하여 다양하므로, 전치 배열이 치아의 크기에 엄격히 연관됐다고 단정 할 수는 없다. 3. 그러나 6전치 폭경의 합에 대한 원의 지름의 비율은 그 평균치가 상하악 모두 1 : 1에 매우 근접하고 이 사실은 Bonwill의 결론에 부합한다. 4. 견치간 폭경과 구치간 폭경은 육전치의 합에 대한 비율이 상하악에 있어서 그 형태가 다름에 따라 상이하나 비교적 일정하게 나타난다.

• 대한치과교정학회지
• /
• 제25권5호
• /
• pp.593-604
• /
• 1995

하악 전치의 밀집은 가장 흔히 볼 수 있는 부정교합의 특징중의 하나이며 교정치료후의 안정성과 재발 측면에서도 중요 관심의 대상이다. 이를 유발시킬 수 있는 원인으로 그동안 많은 요소가 연구되어 왔으며 치아의 크기도 그 중의 하나이다. 현재 교정치료의 진단과 치료에 사용되고 있는 치아 크기 측정에서는 순설측 폭경의 의미가 간과되어 왔는데 Peck과 Peck이 이상적인 하악 전치부 배열을 가진 경우 절치의 근원심 폭경은 평균보다 작고 순설측 폭경은 평균보다 크다는 통계학적 수치를 발표하고 MD/FL index가 하악 전치부 밀집과 높은 상관관계를 가진다고 주장하였다. 본 연구는 한국인에 있어서 하악 절치의 형태 및 크기와 하악 전치부 밀집간의 상관관계, 그들과 전악궁의 치아 밀집간의 연관성을 알아보기 위해 시행되었다. 11세에서 17세에 이르는 154명의 석고 모형을 채득하여 Irregularity index 1 미만인 35명의 정상군과 Irregularity index 1 이상인 119명의 밀집군으로 분류하고 석고모형상에서 연관성 있다고 추정되는 계측항목을 측정한 후 통계처리하여 다음과 같은 결론을 얻었다. 1. 하악 절치의 근원심 폭경은 밀집군에서 큰 값을 보였으나 중절치에서만 유의성을 보였고, 순설측 폭경과 MD/FL index는 유의차가 없게 나타났다. 2. Irregularity index는 밀집군의 하악 절치의 근원심 폭경, MD/FL index와 유의성있는 상관관계를 나타냈으나 순설측 폭경과는 상관관계를 보이지 않았다. 또한 상하악의 Arch length discrepancy, 치관 근원심 폭경 총화와는 순상관 관계를, 하악 견치간 폭경과 제 1 소구치간 폭경과는 역상관관계를 나타내었다. 3. 상하악의 arch length discrepancy는 하악 절치의 근원심 폭경, overbite과 유의성 있는 상관관계를 나타내었고 순설측 폭경과는 상관관계가 나타나지 않았다. 하악의 arch length discrepancy는 하악 절치의 MD/FL index와, 상악의 arch length discrepancy는 측절치의 MD/FL index에서 상관관계를 나타내었다. 4. 정상군과 밀집군의 각 계측항목의 t-검정 결과 하악의 arch length discrepancy, overbite에서만 유의차를 나타내었다.

• The Journal of Advanced Prosthodontics
• /
• 제14권1호
• /
• pp.1-11
• /
• 2022

PURPOSE. The maximum width between the mesial and distal labial transitional line angles, described as "esthetic width" herein, could significantly influence the visual perception of the teeth and smile. This study aimed to conduct biometric research on esthetic width and to explore whether regular distribution exists in the esthetic width of human teeth. MATERIALS AND METHODS. A total of 4,264 maxillary and mandibular anterior teeth were measured using the Geomagic studio software program. The proportions of maxillary to mandibular homonymous teeth and proportions between the adjacent teeth were calculated. Bilateral symmetry and the correlation between the esthetic and mesiodistal widths were both accounted for during the measurement procedures. RESULTS. The mean esthetic widths were 6.773 ± 0.518 mm and 4.329 ± 0.331 mm for maxillary and mandibular central incisors, respectively, 5.451 ± 0.487 mm and 5.008 ± 0.351 mm for maxillary and mandibular lateral incisors, respectively, and 3.340 ± 0.353 mm and 5.958 ± 0.415 mm for maxillary and mandibular canines, respectively. Except for the mandibular canines, no significant difference in esthetic width was found among homonymous teeth from the same jaw. A high linear correlation was found between the esthetic and mesiodistal widths of the same tooth, except for the maxillary canines. Esthetic width proportions among different tooth categories showed some regular patterns, which were similar to those of the mesiodistal width. CONCLUSION. Esthetic width is regularly distributed among the teeth in the Chinese population. This could provide an important reference for anterior dental restorations and dimension recovery in esthetic reconstruction of anterior teeth.

• Imaging Science in Dentistry
• /
• 제46권2호
• /
• pp.117-125
• /
• 2016

Purpose: This study evaluated and compared interradicular distances and cortical bone thickness in Thai patients with Class I and Class II skeletal patterns, using cone-beam computed tomography (CBCT). Materials and Methods: Pretreatment CBCT images of 24 Thai orthodontic patients with Class I and Class II skeletal patterns were included in the study. Three measurements were chosen for investigation: the mesiodistal distance between the roots, the width of the buccolingual alveolar process, and buccal cortical bone thickness. All distances were recorded at five different levels from the cementoenamel junction (CEJ). Descriptive statistical analysis and t-tests were performed, with the significance level for all tests set at p<0.05. Results: Patients with a Class II skeletal pattern showed significantly greater maxillary mesiodistal distances (between the first and second premolars) and widths of the buccolingual alveolar process (between the first and second molars) than Class I skeletal pattern patients at 10 mm above the CEJ. The maxillary buccal cortical bone thicknesses between the second premolar and first molar at 8 mm above the CEJ in Class II patients were likewise significantly greater than in Class I patients. Patients with a Class I skeletal pattern showed significantly wider mandibular buccolingual alveolar processes than did Class II patients (between the first and second molars) at 4, 6, and 8 mm below the CEJ. Conclusion: In both the maxilla and mandible, the mesiodistal distances, the width of the buccolingual alveolar process, and buccal cortical bone thickness tended to increase from the CEJ to the apex in both Class I and Class II skeletal patterns.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.429-438
• /
• 2021

Purpose: This study investigated the accuracy of laser-scanned models and 3-dimensional(3D) rendered cone-beam computed tomography (CBCT) compared to the gold standard (plaster casts) for linear measurements on dental arches. Materials and Methods: CBCT scans and plaster models from 30 patients were retrieved. Plaster models were scanned by an Emerald laser scanner (Planmeca, Helsinki, Finland). Sixteen different measurements, encompassing the mesiodistal width of teeth and both arches' length and width, were calculated using various landmarks. Linear measurements were made on laser-scanned models using Autodesk Meshmixer software v. 3.0 (Autodesk, Mill Valley, CA, USA), on 3D-rendered CBCT models using OnDemand 3D v. 1.0 (Cybermed, Seoul, Korea) and on plaster casts by a digital caliper. Descriptive statistics, the paired t-test, and intra- and inter-class correlation coefficients were used to analyze the data. Results: There were statistically significant differences between some measurements on plaster casts and laser-scanned or 3D-rendered CBCT models (P<0.05). Molar mesiodistal width and mandibular anterior arch width deviated significantly different from the gold standard in both methods. The largest mean differences of laser-scanned and 3D-rendered CBCT models compared to the gold standard were 0.12±0.23 mm and 0.42±0.53 mm, respectively. Most of the mean differences were not clinically significant. The intra- and inter-class correlation results were acceptable for all measurements(>0.830) and between observers(>0.801). Conclusion: The 3D-rendered CBCT images and laser-scanned models were useful and accurate alternatives to conventional plaster models. They could be used for clinical purposes in orthodontics and prostheses.