• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.149-159
• /
• 2001

The conventional block-based motion prediction suffers, especially in low bit-rate video application, from shortcomings such as blocking artifacts of motion field and unstable motion estimation. To overcome the deficiency, this paper proposes one method of adopting a new motion compensation scheme based on the irregular triangular mesh structure while keeping the current block-based DCT coding structure of H.263 as much as possible. To represent the reconstructed previous frame using minimal number of control points, the proposed method designs content-adaptive irregular triangular meshes, and then, estimate the motion vector of each control point using the affine transformation-based matching. The predicted current frame is obtained by applying the affine transformation to each triangular mesh. Experiment with the several real video sequences shows improvement both in objective and subjective picture quality over the conventional block-based H.263 method.

• Korean journal of food and cookery science
• /
• v.8 no.2
• /
• pp.83-93
• /
• 1992

This dissertation was aimed to study the stability of egg foams and the quality of rice yackwa added with egg foams. Because of the difference of protein composion between rice flour and wheat flour, yackwa made from rice powder turned out to be harder and less raised. Egg foams were added to the rice flour to help raise the dough to a great extent and make it softer when frying. The smaples were prepared differently: in the finess of rice flour (100, 140 mesh), the kinds of egg foams (whole egg, egg white), and the content of egg foams (40 g, 60 g), respectively. The stability of egg foams was determined by an Optical microscope, the hardness of rice yackwa was examined by Instron, the structure by Scanning Electron Microscope, the color by Hunter's Colorimeter, and the sensory evaluation was also made. The resluts are as knows: The most stable egg white foam and whole egg foam were the 2 and 3 min. whipped ones, respectively. In the case of rice yackwa, which was made from 140 mesh rice flour and 60 g of whole egg, the hardness and the structure were similar to those of wheat yackm. It was very tasty and most preferred. As a whole, the color of rice yackwa was lighter man mat of wheat yackwa.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.29-40
• /
• 2005

In this paper, we propose a Cluster-based Multicast Routing (CMR) suitable for mobile ad-hoc networks. The main features that our proposed method introduces are the following: a) mobility-based clustering and group based hierarchical structure in order to effectively support stability and scalability, b) group based mesh structure and forwarding tree concepts in order to support the robustness of the mesh topologies which provides limited redundancy and the efficiency of tree forwarding simultaneously, and c) combination of proactive and reactive concepts which provide low route acquisition delay and low overhead. The performance evaluation of the proposed protocol is achieved via modeling and simulation. The corresponding results demonstrate the Proposed multicast protocol's efficiency in terms of packet delivery ratio, scalability, control overhead, end-to-end delay, as a function of mobility, multicast group size, and number of senders.

• Journal of IKEEE
• /
• v.16 no.2
• /
• pp.102-108
• /
• 2012

3-dimensional integrated circuits (3D-ICs) have some problems for power delivery network design due to larger supply currents and larger power delivery paths compared to 2D-IC. The power delivery network consists of power bumps & through-silicon-vias (TSVs), and IR-drop at each node varies with the number and location of power bumps & TSVs. It is important to optimize the power bumps & TSVs while IR-drop constraint is satisfied in order to operate chip ordinarily. In this paper, the power bumps & TSVs optimization with optimized power mesh structure for power delivery network in 3D-ICs is proposed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.360-370
• /
• 2004

Adaptive mesh refinement(AMR) is one of the popular computational simulation techniques used in various scientific and engineering fields. Although AMR data is organized in a hierarchical multi-resolution data structure, traditional volume visualization algorithms such as ray-casting and splatting cannot handle the form without converting it to a sophisticated data structure. In this paper, we present a hierarchical multi-resolution splatting technique using k-d trees and octrees for AMR data that is suitable for implementation on the latest consumer PC graphics hardware. We describe a graphical user interface to set transfer function and viewing / rendering parameters interactively. Experimental results obtained on a general purpose PC equipped with an nVIDIA GeForce3 card are presented to demonstrate that the proposed techniques can interactively render AMR data(over 20 frames per second). Our scheme can easily be applied to parallel rendering of time-varying AMR data.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1112-1115
• /
• 2019

This paper proposes a novel low-profile omni-directional microstrip antenna to mount on the deployable wing of the observation munition. The proposed antenna is designed on seven hexagonal resonators in a quasi-circular array to achieve a monopolar radiation pattern with a thin substrate. By employing the mesh ground structures, the resonant frequencies and impedance bandwidths of the proposed antenna is investigated. To verify the feasibility of the mesh ground structure, the thin ground wire width is investigated theoretically for improving the 3-dB fractional bandwidth, realized antenna gain and quality-factor. The proposed antenna demonstrates a good monopolar radiation in good agreement with the simulation results. The implemented prototype shows the measured bandwidth of 326 MHz with respect to 5.65% centered at 5.77 GHz and realized gain of 5.49 dBi at 5.84 GHz.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.63-72
• /
• 2022

The purpose of this paper was to understand the dynamics of deployment of large mesh antennas, and to provide a numerical method for determining the dynamic stiffness and the driving forces for the design. The deployment structure was numerically modeled using the frame elements. The eigenvalue analysis was demonstrated, with respect to the folded and unfolded configurations of the antenna. A multibody dynamic model was formulated with Kane's equation, and simulated using the pseudo upper triangular decomposition (PUTD) method for resolving the constrained problem. Based on the multibody model, the kinetics of the deployment, the motor driving forces, and the feasibility of the designed deployment structure were investigated.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.68-76
• /
• 2022

The purpose of this paper was to design the cable networks for mesh reflector antennas, considering the flexibility of structures. An effective form-find methodology is proposed. The whole parts of the cable networks are described by the absolute nodal coordinate formulation. Additionally, nonlinear deformation of the cable can be obtained. The form-finding analysis of the reflector with standard configuration is performed, to validate the proposed methodology. The truss ring structure is numerically modeled using the frame elements. To consider the flexibility of the truss ring as well as the cable net structure, an iteration analysis between the truss ring and the cable net under tensional forces is also performed in the form-finding process. The finial configuration of the reflector with tensioned cable networks is demonstrated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.834-837
• /
• 2005

Structural Dynamics Modification (SDM) is a very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures, changing material properties and shape of structure. Among those of SDM technique, the method to change shape of structure has been mostly relied on engineer's experience and trial-and-error process which are very time consuming. In order to develop a systematic method to change structure shape, surface grooving technique is studied and successfully applied to HDD cover model. At first, to check the effect of mesh size, surface grooving technique was tested to the fine HDD cover FEmodel. And fur the more efficient method, the algorithm is modified. Removing the low-valued modal strain energy element among the target domain, computational effort can be greatly reduced and the result of simulation is similar with the other simulation result.

• Wind and Structures
• /
• v.17 no.3
• /
• pp.263-274
• /
• 2013

A numerical technique for fluid-structure interaction, which is based on the finite element method (FEM) and computational fluid dynamics (CFD), was developed for application to an industrial chimney equipped with a pendulum tuned mass damper (TMD). In order to solve the structural problem, a one-dimensional beam model (Navier-Bernoulli) was considered and, for the dynamical problem, the standard second-order Newmark method was used. Navier-Stokes equations for incompressible flow are solved in several horizontal planes to determine the pressure in the boundary of the corresponding cross-section of the chimney. Forces per unit length were obtained by integrating the pressure and are introduced in the structure using standard FEM interpolation techniques. For the fluid problem, a fractional step scheme based on a second order pressure splitting has been used. In each fluid plane, the displacements have been taken into account considering an Arbitrary Lagrangian Eulerian approach. The stabilization of convection and diffusion terms is achieved by means of quasi-static orthogonal subscales. For each period of time, the fluid problem was solved and the geometry of the mesh of each fluid plane is updated according to the structure displacements. Using this technique, along-wind and across-wind effects have been properly explained. The method was applied to an industrial chimney in three scenarios (with or without TMD and for different damping values) and for two wind speeds, showing different responses.