• Ocean and Polar Research
• /
• 제40권1호
• /
• pp.23-35
• /
• 2018

A small cyclopoid copepod M. subtilis (Giesbrecht, 1893 ["1892"]) belonging to the genus Monothula $B{\ddot{o}}ttger-Schnack$ and Huys, 2001 was collected by using $60{\mu}m$ mesh net and firstly recorded in the epipelagic layer of the equatorial Pacific Ocean. We redescribed its morphological characteristics for both female and male, comparing with those of previous studies. Specimens of M. subtilis from the equatorial Pacific Ocean differ from those previously reported by others in terms of the length of the seta G on antenna, being much shorter than setae E and F; in the distal spine on the swimming leg 4, being longer than the length of the third segment on P4. The outer spine of the P3 enp-3 in male is slightly over the tip of conical process. The spine lengths of the distal endopods of P2-P4 for both sexes showed variations among individuals, and the proportions of spine lengths in female are higher than those in male.

• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.15-22
• /
• 2004

Twin-skeg type stern shapes are recently adopted for very large commercial ships. However it is difficult to apply a CFD system to a hull form having twin-skeg, since grid topology around a twin-skeg type stern is more complicated than that of a conventional single-screw ship, or of an open-shaft type twin-screw ship with center-skeg. In the present study a surface mesh generator and a multi-block field grid generation program have been developed for twin-skeg type stern. Furthermore, multi-block flow solvers are utilized for potential and viscous flow analysis around a twin-skeg type stern The present computational system is applied to a 15,000TEU container ship with twin-skeg to prove the applicability. Wave profiles and wake distribution are calculated using the developed flow analysis tools and the results are compared with towing tank measurements.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.361-364
• /
• 2004

This paper describes an automatic 3D models generation algorithm based on 2D silhouette images, using X-ray camera without camera parameters. The algorithm takes a multi steps process approach. First, a series of 2D silhouette images is captured from different directions of object and then converted to binary images. An octree data structure is constructed for voxel-based representation of object. An estimate 3D volume of object can be reconstructed by intersecting voxels and the 2D silhouettes. The marching cube algorithm is applied to get triangle mesh representing of the obtained 3D model for rendering.

• International Journal of Ocean System Engineering
• /
• 제3권2호
• /
• pp.90-94
• /
• 2013

This study represents the recent laboratory results from cathodic protection (CP) system with the use of sacrificial anodes at different environmental conditions (temperature of $10^{\circ}C$ and $40^{\circ}C$). Specimens were slab type with a dimension of $500mm{\times}50mm{\times}100mm$, and concrete cover thickness were 25mm. Zinc mesh and/or bulk type anodes were installed at the center of specimen to confirm the distance that CP system has influences on the specimen to distribute uniform CP current to rebar. Two different kinds of temperature condition were applied to verify the effect of temperature. Experiments were conducted for 60 days, and the distribution of potential and current that supplied from anode to rebar was measured. From the results, CP potential was varied with time, and temperature played an important role in CP potential variations. Current was also changed with time, and current distribution could be improved by installing additional bulk type anode.

• 한국멀티미디어학회논문지
• /
• 제25권4호
• /
• pp.559-567
• /
• 2022

The optimal shipping location is determined by measuring the volume and weights of cargo shipped to non-standard cargo carriers. Currently, workers manually measure cargo volume, but automate it to improve work inefficiency. In this paper, we proposed the method of a real-time volume calculation using LiDar sensor for automating cargo measurement of non-standard cargo. For this purpose, we utilized the statistical techniques for data preprocessing and volume calculation, also used Voxel Grid filter to light weighted of data which are appropriate in real-time calculation. We implemented the function of Normal vectors and Triangle Mesh to generate surfaces and Alpha Shapes algorithms to process 3D modeling.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.796-798
• /
• 2002

In these days, the interruption capability of some circuit breakers, which are installed in the transmission systems, is getting lower than the magnitude of the fault current because of continuous increase of power demand and relatively short power line which was installed in forms of mesh network As a result of these situations, fault current limiters (FCLs) are strongly necessary. There are various types which is investigated around the world, and new power apparatuses that have been newly considered and developed by many manufactures. In this paper, we considered resistive superconducting fault current limiters with YBCO thin films. The resistive limiters utilize a transition of YBCO films from superconducting to normal state caused by exceeding the critical current. By means of newly occurred impedance, the fault current will be limited effectively. Generally, a few current path patterns are available for YBCO films to enhance the current limiting performance of YBCO films. In this paper. the meander-type and the bi-spiral-type were used for current paths of YBCO flims. When YBCO films are quenched into the normal state, bubbles could be observed on the surface of YBCO films. Using our high-speed camera, the number of bubbles and the size of bubbles could be visualized and the relation between bubbles and current density was analyzed. By means of moving pictures of bubbles, we observed how the quench extended or how the heat was conducted in films.

• 수산해양교육연구
• /
• 제26권2호
• /
• pp.421-429
• /
• 2014

We investigated the feeding ecology of juvenile chum salmon (Oncorhynchus keta) during the critical early life stage prey selectivity of juvenile chum salmon during early marine migration in Korean waters at spring 2011. Salmon juveniles and zooplanktons were collected to draw with $20m{\times}5m$ gill net and $300{\mu}m$ mesh zooplankton net at each station on 11th-13th April n 2011. Collected zooplanktons were classified to 5 Phylum, 6 Class, 9 Order 17 Species in this study. Almost 76.4-100% species were classified to Phylum Arthropoda, dominant species was a species out of Hyperia galba of Order Amphipoda, Acartia spp and Paracalanus parvus of Order Calanoida. Collected salmon juveniles were grew up to average 4.7-5.4 cm fork length and average 1.0-1.5 g wet weight in whole station. Fish stomach content (mg/salmon) was heaver to 97.4, 82.4 and 63.2 mg wet weight/salmon in ST 2, 3, 4 than 20.4, 18.9 mg/salmon of ST 1, 5, because there are fish (sand eel, Hypoptychus dybowskii) and Krill (Euphausia) as prey in salmon stomach in ST 2, 3, 4. And ST 2, 3, 4 and 5 were dominated by Amphipoda as Hyperia galba, Themisto japonica and Gammarus sp., but ST 1 was dominated by copepod, because of absence of Amphipoda in the station. Therefore small Amphipoda as Hyperia galba was good prey for just released salmon juvenile in nature.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.82-87
• /
• 2013

In this work, the 1L grade integrated metal DOC/DPF filter that can install in engine manifold position was developed to investigate the effect of platinum-coating amount of filter on the improvement of filter activation temperature and reduction of particulate matter (PM). This filter was installed in 2.9L CI engine which meets the EURO-4 emission regulation. Tests for PM reduction efficiency of filter were conducted under ND-13 mode with full-load test condition. It was revealed that the time to reach the activation temperature of metal filter ($280^{\circ}C$) was shorter as the amount of platinum-coating increased. This short activation time can be helpful for the reduction of CO and HC emissions during cold start condition. At the same time, PM reduced as the coating amount increased. The reduction percentage of $DOC_{40}$, $DOC_{20}$, and $DOC_0$ were 96.7% (2.34 mg/kW'h), 95.1% (3.47 mg/kW'h), and 94.5% (3.69 mg/kW'h) compared to previous result (71.4 mg/kW'h), respectively.

• 한국대기환경학회지
• /
• 제29권3호
• /
• pp.317-324
• /
• 2013

This research assessed the surface properties of modified activated carbons with three different acids and five different metals for ammonia gas removal. Raw bituminous coal-based activated carbon ($4{\times}8$ mesh) had low adsorption capacity of 0.72 mg $NH_3/g$ based on the analysis in the column adsorption experiment. Adsorption capacities of carbons modified with $CH_3COOH$, $H_3PO_4$, and $H_2SO_4$ increased up to 3.34, 21.00, and 35.21 mg $NH_3/g$, respectively. Those of carbons with Cu, Zn, Zr, Fe, and Sn were 9.63, 9.13, 7.09, 25.12 and 15.03 mg $NH_3/g$. Ammonia adsorption was enhanced by the presence of surface oxygen groups on carbon materials, which influenced pH of carbon surface. BET surface area of raw carbon was analyzed to be $1087m^2/g$, but it decreased by carbon surface modification. Fe-impregnated carbon showed $503.02m^2/g$ of surface area. These observations were mostly caused by chemical adsorption.

• Journal of Plant Biotechnology
• /
• 제4권1호
• /
• pp.29-32
• /
• 2002

The ability to form embryiod from callus in satsuma mandarin is low and unstable. In this study, the conditions of embryogenic calli induced from nucellar tissue for promotion of plant regeneration in satsuma mandarin were investigated. The calli of I, II and III line were divided into two sizes of 0.5 mm and 1.0 mm in diameter and two weight gradients of percoll at 40% and 50% though the filter mesh. The frequency of embryo formation from $\phi$ 1.0mm-40% was slightly higher than callus that from others. Adventitious embryoids developed to a globular stage were transferred to regeneration medium. In 'Miyagawa Wase', the embryos from I and II line developed into a heart stage from most of $\phi$ 0.5 mm- 40% and $\phi$1.0 mm-40% calli, but it failed in 'Sugiyama Unshu'. In the cultivar of 'Miyagawa Wase', 63% of adventitious embryos transferred to the regeneration medium developed into the heart stage from the most $\phi$ 1.0 mm-40% calli of I line, but of 'Sugiyama Unshu' failed in some calli condition. The embryoids from two callus lines developed further to shoots and plantlets, while the embriods from III line abnormal failed to regenerate in the cultivar. From these results, it is suggested that the plant regeneration from embryogenic callus in satsuma mandarin could be affected by callus conditions.