• 소음진동
• /
• 제7권4호
• /
• pp.579-588
• /
• 1997

When a membrane couples with compressive fluid, waves on the membrane follow a typical dispersion relations. One of characteristics of this relations is that evanscent waves occur below cutoff frequency. We have attempt to use this spatially decaying characteristics as a low frequency sound absorber. Theoretical development has required to solve membrane-fluid coupled linear differential. The solution has been successfully obtained by using eigenfunctions. To assure the obtained solution, experiment was also performed. The comparison was quite satisfactory. We conclude, based on these theoretical as well as experimental evidences, that it is very likely possible to use a membrane as a low frquency sound control element.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1070-1073
• /
• 2004

This paper is on the development of a system for removing membranes which is designed exclusively for aircraft components. Membrane removal solution is a most critical issue in aerospace industries since a method of manufacturing the components tends to be changed from fabrication of many parts to cutting into one body. The cutting method inevitably produces a huge amount of chips and then membranes remain in the body. The membrane removal process, as a result, becomes an important issue since it is directly related to productivity. We tried to develop a new machine which will replace the conventional method that uses a handy tool. The machine has been designed for a cutting tool set to follow the unique shape of the slot in the body by a cam follower and cut the membrane automatically. The design has been checked by structural analysis: stress and vibration analysis. A prototype test has been finished. This paper summarizes a series of development process of the deburring machine and some design issues are discussed.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.34-39
• /
• 2015

Experimental studies were conducted on the liquid sloshing characteristics in a spherical tank covered with a flexible membrane. A spherical acrylic tank with 145.2 mm in radius was used as a test tank, and it was half-filled with water. Silicon membranes with 0.2 mm thickness were used as a test membrane with plane or hemispherical types. The test tank was harmonically excited in a vertical direction by an electro-dynamic exciter. In this case, a parametric instability vibration comes up when the excitation frequency is twice the natural frequency. Parametric instability regions of natural modes were measured for three cases, i.e. liquid surface is free, covered with plane membrane and hemi-spherical membrane.

• 마이크로전자및패키징학회지
• /
• 제9권3호
• /
• pp.37-41
• /
• 2002

본 연구에서는 자기 공명 특성을 이용한 박막 센서의 멤브레인 및 박막 센서의 특성을 알아보았다. 멤브레인으로 유망한 물질로 $Si_xN_y$과 SiC가 있으며, 최적의 멤브레인 형성 조건을 알고자 박막의 잔류 응력 및 물성을 비교 분석하였다. 그 중에서 박막 센서에 적용 가능한 멤브레인으로 SiC보다 적절한 인장응력과 낮은 열팽창 계수를 가지는 $Si_xN_y$이 센서의 구조층으로 우수하였으며, $Si_xN_y$위에 박막 센서 물질을 증착 및 패턴닝(patterning)을 함으로써 센서의 자기 이력 곡선 및 자기 공진 주파수를 분석하였다. 센서에 인가되는 외부 자기장을 제거하면 자장에 의해 형성된 자화(magnetization)가 탄성 모드로 바뀌면서 에너지 방출에 의해 센서에서 전압이 발생하는데 이때 전압 발생 구간이 길어지면 기계적 진동이 야기되어 신호가 발생한다. 그리고 센서의 길이 및 폭이 증가할수록 자기공명 주파수가 감소하는 것을 볼 수 있다.

• Wind and Structures
• /
• 제19권1호
• /
• pp.35-58
• /
• 2014

A numerical simultaneous solution involving a linear elastic model was applied to study the fluid-structure interaction (FSI) of membrane structures under wind actions, i.e., formulating the fluid-structure system with a single equation system and solving it simultaneously. The linear elastic model was applied to managing the data transfer at the fluid and structure interface. The monolithic equation of the FSI system was formulated by means of variational forms of equations for the fluid, structure and linear elastic model, and was solved by the Newton-Raphson method. Computation procedures of the proposed simultaneous solution are presented. It was applied to computation of flow around an elastic cylinder and a typical FSI problem to verify the validity and accuracy of the method. Then fluid-structure interaction analyses of a saddle membrane structure under wind actions for three typical cases were performed with the method. Wind pressure, wind-induced responses, displacement power spectra, aerodynamic damping and added mass of the membrane structure were computed and analyzed.

• 대한치과의사협회지
• /
• 제44권1호통권440호
• /
• pp.45-54
• /
• 2006

Piezosurgery uses modulated ultrasonic vibration to allow controlled cuting of bony structures. delicate bony structures can be cut easily and with great precision without destruction of soft tissue. Piezosurgery can be used to harvest the chin bone for intra-oral augmentation. Maxillary sinus membrane perforation is the most common complication that occurs with the sinus elevation augmentation procedure. This complication can occur during the osteotomy, which is performed with burs, or during the elevation of the membrane using manual elevators. The purpose of this study is to introduce new surgical technique that simplifies chin bone graft and maxillary sinus surgery, thus avoiding perforating the membrane.

• 센서학회지
• /
• 제18권4호
• /
• pp.286-293
• /
• 2009

The implantable middle ear hearing devices(IMEHDs) have been developed to overcome the conventional hearing aid's problem(ringing effect caused by the acoustic feedback, cosmetic problem, etc.). In the IMEHDs, the vibrating transducer is a key component because its vibration enables to hear for hearing impaired people. The vibrating transducer is implanted on ossicular chain by surgical operation. The coupling status between implanted transducer and ossicular chain has an effect on delivering vibrating force from transducer to stapes. Noninvasive method is required to investigate the output characteristics of IMEHDs after implementation. Recently, emitted sound pressure measuring method of tympanic membrane is proposed to investigate the output characteristics of IMEHDs. However, the relationship between displacement of stapes and sound pressure by tympanic membrane was not cleared. In this paper, displacement of stapes and sound pressure by tympanic membrane were measured using the differential floating mass transducer(DFMT) that implanted on the ossicular chain of the human temporal bone and physical ear model. Through the experiments results, the relationship between displacement of stapes and sound pressure by tympanic membrane was investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.714-717
• /
• 2007

In this study, a novel actuator was developed by employing the newly-synthesized ionic networking membrane (INM) of poly (styrene-alt-maleic anhydride) (PSMAn)-incorporated poly (vinylidene fluoride) (PVDF). Based on the same original membrane, various samples of INM actuator were prepared through different reduction times with the electroless-plating technique. The as-prepared INM actuators were tested in terms of surface resistance, platinum morphology, resonance frequency, tip displacement, current and blocked force, and their performance was compared to that of the widely-used traditional Nafion actuator. Scanning electron microscope (SEM) and transmission electron microscopy (TEM) revealed that much smaller and more uniform platinum particles were formed on the surfaces of the INM actuators as well as within their polymer matrix. Although excellent harmonic response was observed for the newly-developed INM actuators, this was found to be sensitive to the applied reduction times during the fabrication. The mechanical displacement of the INM actuator fabricated after optimum reduction times was much larger than that of its Nafion counterpart of comparable thickness under the stimulus of constant and alternating current voltage.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.645-648
• /
• 2005

The grounds of multipurpose practical use degree are built much holding world cup 2002 but material that is used in this building most external membrane ceiling is accomplishing PTEE A master and servant. Therefore, this research analyzed assessment about sound absorption special quality that measure ventilation quantitys of 10 act material and analyze correlation with Air Permeability and the sound absorption rate, and follow in change of layer of air of inside facts material. Result is as following. When Air Permeability good dimension is 5$\sim$15 cc/cm$^2$/sec and acoustic absorptivity is the best as Air Permeability result that measure acoustic absorptivity of inside facts material particularly firstly, could know 8$\sim$9 cc/cm$^2$/sec love. When establish sound absorption inside facts in external membrane as result that measure acoustic absorptivity of inside (acts material secondly, could know that acoustic absorptivity is good though become about minimum back layer of air 900mm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.316-317
• /
• 2009

The ion-exchange membrane, Nafion, remains as the benchmark for a majority of research and development in IPMC technology. In this research, we employed a novel ionomer named by sulfonated poly(styrene-ran-ethylene) (SPSE) that is crosslinked by UV irradiation. The sulfonic acid groups were stable during the UV irradiation crosslinking process. Water uptake, ion exchange capacity, and proton conductivity are characterized for both pure SPSE and crosslinked SPSE membrane. The bending responses of SPSE actuators under both direct current (DC) and alternating current (AC) excitations were investigated. The voltage-current behaviors of the actuators under AC excitations are also measured. Results showed the crosslinked SPSE actuators have better electromechanical performance than that of pure SPSE actuator with regard to tip displacement as a novel smart material.