• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 추계 총회 및 학술발표회
• /
• pp.14-16
• /
• 1994

Requirements for the hemodialysis membrane are excellent permeability for water and solute, mechanical strength and blood compatibility. Many synthetic polymer membranes have been invertigated to raise the efficiency of dialysis, however, 85% of the worldwide hemodialysis still uses cellulose membrane. Though the cellulose membrane has both good permeability and mechenical properties, its blood compatibility needs to be improved for hemodialysis. In this paper, 2-(methacryloyloxy)ethyl-2-(trimethyl ammonium) ethyl phosphate(MTP) and Glycidylmethacrylate(GMA) were grafted on the cellulose membranes to make blood compa- tible membranes.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 춘계 총회 및 학술발표회
• /
• pp.51-52
• /
• 1994

High permeability, selectivity and stability are the basic properties also required for membrane gas separations. The $CO_2$ separation by liquid membranes has been developed as a new technique to improve the permeability and selectivity of polymeric membranes. Sirkar et al.(1) have atlempted the hollow-fiber contained liquid membrane technique under four different operational modes, and permeation models have been proposed for all modes. Compared to a conventional liquid membrane, the diffusional resistance decreased by the work of Teramoto et al.(2), who referred to a moving liquid membrane. Recently, Shelekhin and Beckman (3) considered the possibility of combining absorption and membrane separation processes in one integrated system called a membrane absorber. Their analysis could be predicted effectively the performance of flat sheet membrane, however, there are restrictions for considering a flow effect. The gas absorption rate is determined by both an interfacial area and a mass transfer coefficient. It can be easily understood that although the mass transfer coefficients in hollow fiber modules are smaller than in conventional contactors, the substantial increase of the interfacial area can result in a more efficient absorber (4). In order to predict a performance in the general system of hollow-fiber membrane absorber, a gas-liquid mass transfor should be investigated inevitably. The influence of liquid velocity on both a mass transfer and a performance will be described, and then compared with experimental results. A present study is attempted to provide the fundamentals for understanding aspects of promising a hollow-fiber membrane absorber.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.292-299
• /
• 2012

The objective of this study is to develop a novel method for evaluating forward osmosis (FO) membrane performances using a non-pressurized FO system. Basic membrane performance parameters including water (A) and solute (B) permeability coefficients and unique parameter for FO membrane such as the support layer structural parameter (S) were determined in two FO modes (i.e., active layer faces feed solution (AL-FS) and active layer faces draw solution (AL-DS)). Futhermore, these parameters were compared with those determined in a pressurized reverse osmosis (RO) system. Theoretical water flux was calculated by employing these parameters to a model that accounts for the effects of both internal and external concentration polarization. Water flux from FO experiment was compared to theoretical water fluxes for assessing the reliability of those parameters determined in three different operation modes (i.e., AL-FS FO, AL-DS FO, and RO modes). It is demonstrated that FO membrane performance parameters can be accurately measured in non-pressurized FO mode. Specifically, membrane performance parameters determined in AL-DS FO mode most accurately predict FO water flux. This implies that the evaluation of FO membrane performances should be performed in non-pressurized FO mode, which can prevent membrane compaction and/or defect and more precisely reflect FO operation conditions.

• 멤브레인
• /
• 제33권6호
• /
• pp.439-446
• /
• 2023

세라믹 분리막은 높은 열적, 화학적 안정성을 갖기 때문에 극한의 조건에서 운전되는 다양한 산업 공정에 적용할 수 있다. 그러나 투과도와 기계적 강도의 trade-off 현상에 의한 세라믹 분리막 활용에 제약이 있어, 고투과성-고강도 분리막의 개발이 필요하다. 본 연구에서는 상전이-압출법으로 알루미나 중공사 분리막을 제조하고, 고분자 바인더의 종류와 그 혼합비에 따른 분리막의 특성 변화를 관찰하였다. 용매인 DMAc (Dimethylacetamide)와 고분자 바인더의 한센 용해도 인자를 비교하면, PSf (polysulfone)가 DMAc와 높은 용해도 특성을 갖기 때문에 도프 용액의 점도와 토출압력이 높게 나타나 분리막 내부가 치밀한 구조로 형성되기 때문에 높은 기계적 강도를 갖으나 수투과도가 감소하는 것으로 확인되었다. 그에 반해, PES(polyethersulfone)를 이용하여 분리막을 제조하면 기계적 강도가 다소 감소하고 수투과도가 증가하는 것으로 나타났다. 따라서 분리막 성능과 물성을 최적화하기 위해 PSf와 PES를 혼합하여 분리막을 제조하였으며, 9:1로 혼합하여 제조된 분리막에서 최적화된 수투과도와 기계적 강도를 얻을 수 있었다.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.124-128
• /
• 2000

Electrical properties of $ZrO_2-TiO_2Yb_2O_3$mixed conductor (Ti-YbSZ) were investigated. This mixed conductor can be applied as a membrane for gas separation at high temperatures. The total conductivity decreased with increasing the $TiO_2$concentration. At high temperatures, the rate of the conductivity degradation became smaller than that at low temperatures. From the oxygen partial pressure dependence of the total conductivity of Ti-YbSZ, the electronic conductivity increased with increasing $TiO_2$concentration at low oxygen partial pressures and at high temperatures. Both 15 and 20 mol% $TiO_2$doped YbSZ showed high oxygen permeability. Mixed conductors, which has high $TiO_2$concentration in YbSZ, are promising materials for using as a membrane for gas separation at high temperatures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.225-226
• /
• 2013

Existing polyurethane membrane waterproofing has been raised defects such as heaving. Therefore, We will be utilizing as the basic experimental data by the water vapor permeability test to the air cell structure of ultra rapid harding membrane waterproofing using the static mixing system in this study.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.19-22
• /
• 1999

• 멤브레인
• /
• 제25권5호
• /
• pp.415-421
• /
• 2015

고상반응법을 이용하여 $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ 조성의 산화물을 합성하였으며, 합성된 분말은 압축 성형 후 $1250^{\circ}C$에서 소결하여 치밀한 세라믹 분리막을 제조하였다. XRD 분석을 통해 단일상의 페롭스카이트 구조를 확인하였다. 산소 분압이 0.21 atm, 측정 온도가 $800{\sim}950^{\circ}C$인 조건하에서 산소투과를 분석한 결과 온도가 증가할수록 산소투과량은 증가하였고, $950^{\circ}C$에서 $1.839mL/min{\cdot}cm^2$로 최대값을 나타내었다. 니오븀(Nb)을 포함한 세라믹 분리막의 상안정성 및 이산화탄소 내성을 확인하기 위하여 $900^{\circ}C$에서 이산화탄소가 500 ppm이 포함된 혼합공기를 이용하여 장기투과 실험을 수행하였다. 이산화탄소에 노출된 $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$의 상안정성은 XRD와 TG로 분석하였다. 분석 결과, 이산화탄소에 노출된 $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ 조성의 경우 약 8%의 $SrCO_3$가 생성되었으나, 이 수준의 $SrCO_3$ 생성량은 분리막의 산소투과도에 큰 영향을 주지 않는 것을 확인하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 춘계 총회 및 학술발표회
• /
• pp.9-19
• /
• 2002

No Abstract, See Full-text

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 추계 총회 및 학술발표회
• /
• pp.41-44
• /
• 1999