• Korean Membrane Journal
• /
• v.5 no.1
• /
• pp.18-24
• /
• 2003

In order to improve the mechanical properties of the sulfonated polysulfone (SPSf) membranes previously synthesized in our laboratory, poly(vinyl alcohol) (PVA) was blended which is well known as the excellent physical and chemical properties. The resulting membranes blended with several molecular weight of PVA varying from 13,000 to 124,000 have been characterized to investigate the effect of PVA molecular weight in terms of ion conductivities, methanol permeabilities, water contents and ion exchange capacities for both heat treated and untreated membranes at 150$^{\circ}C$. The proton conductivity is decreased as the molecular weight of PVA increases. The plain SPSf-6.0 showed the proton conductivity of 0.078 S/cm whereas the blended membrane with M.W. 31,000 PVA indicated 0.04 S/cm. For methanol permeabilities, when PVA is added to SPAf-6.0, methanol crossover is increased because of the gain of the hydrophilicity from 3.4 to 6.5${\times}$10$\^$-6/ $\textrm{cm}^2$/s. For the annealed blended membranes (with M.W. 31,000 PVA), both the methanol corssover and proton conductivity showed very consistent values, about 2.3${\times}$10$\^$-6/ $\textrm{cm}^2$/s and 0.036 S/cm, respectively.

• Membrane Journal
• /
• v.9 no.2
• /
• pp.114-125
• /
• 1999

Dense polymer membranes were made from vanous silicone polymers such as poly(1-trimethylsilyl-1-propyneHPTMSP), poly(dimethylsiloxaneHPDMS), PTMSP- g-PDMS. These membranes were evaluated in terms of the removal of chlorinated organic hydrocarbons such as chloroform, trichloroethylene(TCE), perchloroethylene(PCE) from water by pervaporation. It was possible for membranes used in this study to remove PCE selectively which is dissolved small quantity in water among other separable solutes. PTMSP membranes exhibited a remarkable decay in permeability with time because of the free volume decreases. However, PTMSP-g-PDMS membrane underwent no physical aging and showed the stable flux behavior. From the results of the contact angle measurement, polymeric membranes used in this study showed affinity with solutes for separation and no affinity with water. The relative swelling degree was directly related to the selectivity, while it has no influence on the flux.

• Membrane Journal
• /
• v.5 no.2
• /
• pp.81-88
• /
• 1995

Separation performance was measured for the disc plate and frame type reverse osmosis module using NaCl and sucrose solutions. An analysis of membrane performance was done following the equations proposed by Kimura-Sourirajan[8]. The membrane permeability was $2.17 \times 10^{-6}$(gmol/$cm^2$-sec-bar) and independent of operating pressure. The effect of concentration polarization for sucrose solution was higher than that of NaCl. Permeation flux for sucrose solution above 40 bar was decreased as operating pressure was increased. Solute rejection for NaCl solution was decreased, but that of sucrose was increased as operating pressure was increased.

• Membrane Journal
• /
• v.26 no.5
• /
• pp.351-364
• /
• 2016

In recent decades, many researchers have tried to improve desalination performances of polyamide (PA) thin-film composite membranes (TFCs) by incorporating nanomaterials into a selective PA layer. This review focuses on PA-based nanocomposite membranes with high performances for energy-effective desalination in reverse osmosis. Carbon based nanomaterial (e.g., graphene oxide (GO), carbon nanotubes (CNT)) and/or other nanoparticles (e.g., zeolite, silica and etc.,) were applied to overcome the trade-off correlation between water permeability and salt rejection of current polymeric desalination membranes. Here, this brief review will discuss current studies of PA-based nanocomposite membranes with enhanced separation characteristics and provide the future research direction to achieve further improved desalination performances.

• Journal of Korean Society on Water Environment
• /
• v.20 no.3
• /
• pp.296-300
• /
• 2004

The rejection properties of 6 aromatic pesticides were evaluated by a continuous flow system equipped with a hollow fiber NF membrane. Different from the separation experiment of batch cell, the rejection and the removal could be calculated exactly because the concentration of feed, permeate and retentate was separately obtained. The lowest and the highest rejection were found in carbaryl(54.8%) and methoxychlor(99.2%), respectively, and the removals were always shown higher than rejections. This may be caused by some reasons such as the solute adsorption on the membrane, the variation of feed concentration. Although molecular weight, molecular width regarded as solute characteristics and log P(n-octanol/water partition coefficient) as hydrophobicity could be applied to explain the rejection property, these factors should be considered together for better analysis. According to the higher relationship between log B(solute permeability) and molecular weight, it was revealed that the solute separation with this membrane was influenced more by molecular weight.

• Membrane and Water Treatment
• /
• v.10 no.6
• /
• pp.451-460
• /
• 2019

Thin film composite membranes incorporated with nano-sized hydrophilic zeolite -A were successfully prepared via interfacial polymerization (IP) on porous blend PES/PAN support for water desalination. The thin film nanocomposite membranes were characterized by SEM, contact angle and performance test with 7000 ppm NaCl solution at 7bar. The results showed that the optimum zeolite loading amount was determined to be 0.1wt% with permeate flux 29LMH.NaCl rejection was improved from 69% to 92% compared to the pristine polyamide membrane where the modified PA surface was more selective than that of the pristine PA. In addition, there was no significant change in the permeate flux of the thin film nanocomposite membrane compared with that of the pristine PA in spite of the formation of the dense polyamide layer. The stability of the polyamide layer was investigated for 15 days and the optimized membrane presented the highest durability and stability.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.8
• /
• pp.1003-1010
• /
• 2022

The purpose of this study was to examine the phytochemical compounds and antibacterial activity of Coffea robusta leaf extract (RLE). The results indicated that chlorogenic acid (CGA) is a major component of RLE. The minimum inhibitory concentrations (MICs) of RLE against Staphylococcus aureus, Bacillus subtilis, Escherichia coli, and Salmonella Typhimurium were 6.25, 12.5, 12.5, and 12.5 mg/ml, respectively. RLE effectively damages the bacterial cell membrane integrity, as indicated by the high amounts of proteins and nucleic acids released from the bacteria, and disrupts bacterial cell membrane potential and permeability, as revealed via fluorescence analysis. Cytotoxicity testing showed that RLE is slightly toxic toward HepG2 cells at high concentration but exhibited no toxicity toward Caco2 cells. The results from the present study suggest that RLE has excellent potential applicability as an antimicrobial in the food industry.

• Macromolecular Research
• /
• v.12 no.6
• /
• pp.598-603
• /
• 2004

Cellulose nitrate (CN) composite membranes, containing cobalt porphyrin (CoP) complexes self-assembled within nanometer-sized rhenium clusters (ReCoP), have been prepared and their oxygen and nitrogen gas perme­abilities were analyzed. The solubility of ReCoP and the characteristics of the corresponding composite membranes were analyzed using a Cahn microbalance, FT-IR spectroscopy, wide-angle X-ray scattering, and differential scanning calorimetry. The nitrogen permeability through the CN composite membranes decreased upon addition of ReCoP and CoP, which implies that the presence of these oxygen carrier complexes affects the structure of the polymer matrix. The oxygen permeability through the composite membranes containing small quantities of ReCoP decreased, but it increased upon increasing the concentration. The oxygen gas transport was affected by the matrix at low ReCoP concentrations, but higher concentrations of ReCoP increased the oxygen permeability as a result of its reversible and specific interactions with oxygen, effectively realizing ReCoP carrier-mediated oxygen transport.

• Archives of Pharmacal Research
• /
• v.19 no.4
• /
• pp.264-268
• /
• 1996

Panax-ginseng saponin has been known to exert various pharmacological effects on cellular metabolism. This study was performed to determine the effect of ginseng saponin on gap junction channel-mediated intercellular communication, using an established in vitro system of reconstituted gap junction channels. Gap junction channels are a specialized plasma membrane fraction, which are permeable to relatively large water-soluble molecules. The sucrose permeable property of reconstituted gap junction channels was completely inhibited with 0.1 % (w/v) of ginseng saponin. We also compared the effect of ginseng saponin with that of Triton X-100, a nonionic detergent, on the same system. Triton X-100 showed significantly different effect on sucrose-permeability of gap junction channel from that was affected by ginseng saponin. The structures of liposomes containing gap junction channels was significantly destroyed by Triton X-100.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.234.3-235
• /
• 2003

The aim of this study is to evaluate the permeability of PEG-conjugated salmon calcitonin (sCT) across monolayers of Caco-2 cells that represent a model of the intestinal barrier. Caco-2 cells were grown to confluency on a permeable polycarbonate membrane to permit transport through it. Permeability experiments were performed with native-sCT and PEG-conjugated sCT (PEG M.W. 2000) at various concentrations (5uM, 10uM, 25uM, 50uM, 100uM) in the apical to basolateral direction. The barrier properties were assessed by detecting transport of markder molecules ($^3$H-mannitol) and by measuring transepithelial electrical resistance (TEER). (omitted)