• Journal of Microbiology and Biotechnology
• /
• 제19권9호
• /
• pp.1028-1033
• /
• 2009

In this study, the dynamics of living cells (LC) and dead cells (DC) in a laboratory-scale biofilm membrane bioreactor for waste gas treatment was examined. Toluene was used as a model pollutant. The bacterial cells were enumerated as fluoromicroscopic counts during a 140 operating day period using BacLight nucleic acid staining in combination with epifluorescence and confocal laser scanning microscopy (CSLM). Overall, five different phases could be distinguished during the biofilm development: (A) cell attachment, (B) pollutant limitation, (C) biofilm establishment and colonization, (D) colonized biofilm, and (E) biofilm erosion. The bioreactor was operated under different conditions by applying different pollutant concentrations. An optimum toluene removal of 89% was observed at a loading rate of 14.4 kg $m^{-3}d^{-1}$. A direct correlation between the biodegradation rate of the reactor and the dynamics of biofilm development could be demonstrated. This study shows the first description of biofilm development during gaseous toluene degradation in MBR.

• Journal of Microbiology and Biotechnology
• /
• 제19권7호
• /
• pp.698-708
• /
• 2009

High rate sulfate reduction under acidic conditions opens possibilities for new process flow sheets that allow the selective recovery of metals from mining and metallurgical waste and process water. However, knowledge about high-rate sulfate reduction under acidic conditions is limited. This paper investigates sulfate reduction in a membrane bioreactor at a controlled pH of 5. Sulfate and formate were dosed using a pH-auxostat system while formate was converted into hydrogen, which was used for sulfate reduction. Sulfide was removed from the gas phase to prevent sulfide inhibition. This study shows a high-rate sulfate-reducing bioreactor system for the frrst time at pH 5, with a volumetric activity of 188 mmol $SO_4^{2-}$/I/d and a specific activity of 81 mmol $SO_4^{2-}$volatile suspended solids/d. The microbial community at the end of the reactor run consisted of a diverse mixed population including sulfate-reducing bacteria.

• 멤브레인
• /
• 제14권4호
• /
• pp.289-297
• /
• 2004

유기물과 질소를 동시에 제거하기 위하여 연속회분식으로 운전한 MBR (membrane bioreactor)시스템에서 미생물농도와 슬러지 부하량이 막오염과 미생물 활성에 미치는 영향을 살펴보았다. 막오염은 MLSS (mixed liquor suspended solid) 농도 증가에 따라 조금씩 증가하는 경향을 보였고, 그 효과는 비포기 조건보다 포기 조건에는 좀더 두드러지게 나타났다. MLSS 농도는 막오염에 직접적인 커다란 영향을 주지는 않으나, 지나치게 높은 MLSS에서 유도되는 낮은 슬러지 부하에서는 막오염이 크게 증가하는 현상이 발견되었고, 이러한 조건에서는 포기에 의한 막 세척 효과도 크게 줄어들었다. 미생물의 개별 활성도는 슬러지 부하가 감소할수록 지속적으로 감소하는 경향을 나타내었다 반응조 전체 활성도 또한 17,000 mg/L 이상의 높은 MLSS로부터 유도되는 낮은 슬러지 부하율에서는 높은 미생물 농도에도 불구하고 오히려 감소했는데 이는 기질 부족으로 인한 경쟁으로 활성도가 떨어지고, 용액의 점성 증가로 인해 산소 전달율이 저하되었기 때문이다.

• 멤브레인
• /
• 제21권4호
• /
• pp.360-366
• /
• 2011

음식물 폐기물 침출수를 처리하는 분리막 결합 고온 혐기성소화공정(생물학적 반응조) (Anaeorobic Membrane Bioreactor, AnMBR)의 파일럿 운전에서 분리막의 교차여과 속도와 막간압력이 파울링에 미치는 영향을 관찰하였다. 연구 결과 정압여과 하에서 교차여과 속도가 증가할수록 파울링의 속도는 현격히 감소되었다. 그러나 이와 같은 영향은 낮은 막간압력에서 더욱 효과적이었다. 막간압력이 증가할수록 여과대상 물질의 압축성으로 인해 투과성이 상대적으로 낮은 파울링층(혹은 케익층)이 분리막 표면에 형성된 것에 기인된 듯하다. 여과대상 시료의 입도분석을 해 본 결과 입자크기는 약 $10{\sim}100{\mu}m$ 범위에서 분포하였고 이에 따라 브라운확산에 의한 역수송보다 분리막 표면에서 교차여과에 의해 발생하는 전단력이 입자의 역수송에 더욱 기여하고 있음을 예측할 수 있었으며 이는 AnMBR의 연속운전을 통해 재확인할 수 있었다. 운전 후 막 부검을 실시한 결과 유기 및 무기 파울링이 모두 관찰되었으나 어느 것이 지배적인 파울링 기작을 나타내는지는 앞으로 더욱 연구가 필요하다. 무기 파울링의 경우 대부분 분리막 표면에서 스케일링 형성이 지배적이었으며, 따라서 분리막의 공극 막힘에 주로 기여하는 작은 콜로이드성 유기물질의 경우 분리막 표면에서 전단력에 의한 역수송 효과는 그다지 크지 않을 것으로 사료된다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 추계 총회 및 학술발표회
• /
• pp.158-161
• /
• 2002

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 춘계 총회 및 학술발표회
• /
• pp.94-96
• /
• 1999

• 상하수도학회지
• /
• 제20권1호
• /
• pp.122-127
• /
• 2006

The aim of this study was to investigate the characteristics of membrane fouling caused by soluble organic materials in a membrane bioreactor process. For the removal of filterable organic materials (FOC) smaller than $1{\mu}m$, coagulants and activated carbon were added. A membrane bioreactor using a submerged $17{\mu}m$ metal sieve was operated in laboratory scale to examine the possibility of membrane fouling control. As the dosage of GAC and coagulant increased, the residual FOC concentration decreased and the permeate flow rate increased markedly. The permeate flux increased with an increased PACl addition at the range from 0 to 50 mg/l. At coagulant dosage of 27mg/l, the removal of FOC was about 46% and the flux increased to 3.5 times compared to the case without PACl addition. The permeate flux increased gradually with an increase in GAC dosage. At GAC dosage of 50mg/L, the permeate flux was about 2 times higher compared that for raw water. The particle in the range of $0.1{\sim}1.0{\mu}m$ were removed effectively by the addition of GAC and coagulant. Higher osage of GAC and coagulant, led to higher removal of FOC. A different set of experiments was also performed to investigate the effect of pretreatment on the permeation ability of MBR system using the metal sieve membrane. After 40 hours of operation, the permeate flux was about 1,000 ($L/m^2-hr$), which is 20 times higher compared to the results in literature. It is likely that combined pretreatment using coagulant and activated carbon was the most effective to resolve membrane fouling problems. Moreover, the continuous operations could be successful by applying this pretreatment method.

• 대한환경공학회지
• /
• 제30권1호
• /
• pp.31-36
• /
• 2008

본 연구는 도시하수 처리를 위한 침지형 막 분리 활성슬러지법(membrane bioreactor: MBR) 시스템에서 막 재질 및 구조가 파울링에 미치는 영향을 조사하기 위하여, polytetrafluoroethylene(PTFE), polycarbonate(PCTE) 및 polyester(PETE)의 정밀여과 막(기공크기: 0.1 $\mu$m)을 사용하였다. 120일의 운전기간 동안 PETE막 여과속도는 다른 막들에 비해 가장 빠른 감소경향을 보였으나, 화학세정을 할수록 점차 PCTE 및 PTFE막과 유사한 여과속도 감소경향을 보였다. PETE막의 유기물 제거율이 다른 막들에 비해 약간 높게 나타났으며, 이것은 막의 빠른 파울링 발생과 밀접한 관련이 있는 것으로 판단된다. 반응조내 슬러지 상징액 및 막 여과수에 존재하는 DOC성분을 친수성 및 소수성으로 분획한 결과, 본 연구에서는 막의 친수성/소수성이 MBR 파울링에 미치는 영향이 크지 않은 것으로 나타났다. 파울링이 발생한 막들의 각종 여과저항 값을 분석한 결과, PETE막은 비가역적 파울링에 의한 영향이 다른 막들에 비하여 컸으며, 유기물 제거율에도 긍정적인 영향을 미친 것으로 판단된다.

• Journal of Microbiology and Biotechnology
• /
• 제16권3호
• /
• pp.469-474
• /
• 2006

Partial nitrification blocking of the oxidation of nitrite ($NO_{2}^{-}$) to nitrate ($NO_{3}^{-}$) has cost-efficient advantages such as lower oxygen and organics demand for nitrification and denitrification, respectively. A nitrifying membrane bioreactor of submerged type was operated for the treatment of synthetic ammonium wastewater with the purpose of nitrite build-up without affecting the efficiency of ammonium oxidation. A high ammonium concentration (1,000 mg/l) was completely converted to nitrate at up to 2 kg $N/m^3$ day under sufficient aeration. The control of pH under sufficient aeration was not a reliable strategy to maintain stable nitrite build-up. When the dissolved oxygen concentration was kept at 0.2-0.4 mg/l by adjusting the aeration rate, about 70% of nitrite content was obtained with ammonium oxidation efficiency higher than 93%. The increase of suction pressure due to membrane fouling was not significant under lowered aerating environment over a 6-month period of operation. The composition of nitrifier community, including relative abundance of nitrite oxidizers in a nitrite-accumulating condition, was quantified by fluorescence in situ hybridization analysis.

• Membrane and Water Treatment
• /
• 제8권6호
• /
• pp.517-528
• /
• 2017

This study evaluates the performance of membrane bioreactor (MBR) coupled with a modified walnut shell granular activated carbon (WSGAC) for tannery wastewater treatment. For this purpose, a pilot with overall volume of 80L and 12 hours hydraulic retention time (HRT) is operated in three scenarios. Here, the chemical oxidation demand (COD) of wastewater is reduced more than 98% in both C:N ratios of 13 (S1) and 6.5 (S2). This performance also remains intact when alkalinity depletes and pH reduces below 6 (S3). The ammonium removal ranges between 99% (S2) and 70% (S3). The reliability of system in different operating conditions is due to high solids retention time and larger flocs formation in MBR. The average breakthrough periods of WSGAC are determined between 15 minutes (S2) and 25 minutes (S1). In this period, the overall nitrate removal of MBR-WSGAC exceeds 95%. It is also realized that adding no chemicals for alkalinity stabilization and consequently pH reduction of MBR effluent (S3) can slightly lengthen the breakthrough from 15 to 20 minutes. Consequently, MBR can successfully remove the organic content of tannery wastewater even in adverse operational conditions and provide proper influent for WSGAC.