• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.5-11
• /
• 2001

Melting behavior and bridge phenomenon of solder paste, which is essential for surface mount technology in pachaging, were investigated. Solder paste of Sn-37%Pb was printed on Cu-pattern of PCB, and heated over melting point. Melting behavior of the paste was observed using CCD-camera. In order to modelize the melting and agglomeration phenomena of paste, two solder balls of 0.76 mm diameter were used. As experimental results, the paste start to melt from the margin of the printed shape. The height of the melted paste decreased from 270 $\mu\textrm{m}$ to 200 $\mu\textrm{m}$ firstly, and finally recovered to 250 $\mu\textrm{m}$ During the melting procedure, pores were evolved from the molted paste. Concerning melting model of solder ball, relationship between contact area of solder ball and soldering time was derived as $\chi^2/t=4r \; \gamma/\eta=7.56 m^2$/s at $280^{\circ}C$.

• Journal of Korea Foundry Society
• /
• v.33 no.2
• /
• pp.69-74
• /
• 2013

Silicon (Si) wafer was grown by using direct growth from Si melt and contaminations of wafer during the process were investigated. In our process, BN was coated inside of all graphite parts including crucible in system to prevent carbon contamination. In addition, coated BN layer enhance the wettability, which ensures the favorable shape of grown wafer by proper flow of Si melt in casting mold. As a result, polycrystalline silicon wafer with dimension of $156{\times}156$ mm and thickness of $300{\pm}20$ um was successively obtained. There were, however, severe contaminations such as BN and SiC on surface of the as-grown wafer. While BN powders were easily removed by brushing surface, SiC could not be eliminated. As a result of BN analysis, C source for SiC was from binder contained in BN slurry. Therefore, to eliminate those C sources, additional flushing process was carried out before Si was melted. By adding 3-times flushing processes, SiC was not detected on the surface of as-grown Si wafer. Polycrystalline Si wafer directly grown from Si melt in this study can be applied for the cost-effective Si solar cells.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1195-1203
• /
• 2012

Welding is a well-developed, widely used process for permanently joining metal components. However, the mechanical reliability of welded parts still offers room for improvement. A weld region consists of a fusion zone, a partially melted zone, and a heat-affected zone, and each zone has different material properties. In addition, the geometrical shape of a weld bead or fillet influences the mechanical reliability. A precise structural analysis must consider how a local welded region influences the mechanical behavior of the entire structure. This study focuses on an effective modeling scheme for the weld region. It relies on experimental and numerical methods to determine the proper correlation based on experimental results and to propose a modeling scheme for welded parts.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.212-212
• /
• 2014

0.04% Gd-duplex stainless steels (Gd-DSTSs) for neutron absorbing materials were inert arc-melted and poured into a Y-shape block with the size of $100{\times}100{\times}20[mm]$. The Gd-DSTS was hot rolled at $1200^{\circ}C$ followed by cold rolling to have 33% reduction. The average grain sizes of the rolling (RD), transverse (TD) and short transverse (ST) directions were 6, 7, $11{\mu}m$, respectively. The micro-hardnesses of the RD, TD and ST directions were 258.5, 292.3, 314.7 $H_V$, respectively. Corrosion potential and corrosion rate of the cold rolled Gd-duplex stainless steel in aerated artificial sea water and 0.1M $H_2SO_4$ solution were $0.2216V_{SHE}$, $0.0106A/cm^2$, $-0.0825V_{SHE}$, $0.0168A/cm^2$ for RD, $0.2210V_{SHE}$, $0.0077A/cm^2$, $0.0817V_{SHE}$, $0.0092A/cm^2$ for TD, $0.1056V_{SHE}$, $0.0059A/cm^2$, $0.0475V_{SHE}$, $0.0069A/cm^2$ for ST, respectively. The corrosion behavior depended on the texture, which were due to mainly grain boundary and minorly crystallographic texture. Friction coefficient and wear resistance were 2.07 and 0.48 mm, respectively.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.4
• /
• pp.25-35
• /
• 1999

This thesis is to newly understand the value and the meaning of Chonju Palkyong(全州八景) by the specific gravity in making a counter-proposal in other to improve the landscape identity of modern city and at the same time. I intended to group the grafting device for the preservation and regeneration of modern history cultural environment through the interpretation of landscape construction. The meaning system of Chonju Palkyong showed the symbolic system which a landscape construction, four directions and two places has and exhibited the landscape shape possessing a luxuriant local feature peculiar to Chonju, preserving visual bound language of a classical Palkyong. Especially, it implies the use of the substantial landscape experienced factor, the expressions about natural phenomena and the matter which has melted human living circumstances. The landscape construction and it's form show the system which forms the different time field, a far landscape and a mid distance landscape and a near landscape, etc., under the visual, psychological, scenic influenced area, preserving the feature of the similar and typical type of Sosang Palkyoung（瀟湘八景) which intended to seek the local reappearance of the famous site experienced type and natural matter which famous place and local conduct were combined. The object space of Chonju Palkyong area representing the nature of historical landscape cultural assets, pushed by the greater part of the development based theory, shows injured aspects, but needs to play a part to seek such a up-to-date successive plan as the reconstruction of the destroyed historical landscape area which motivated Palkyong, the establishment of useful area, the embodiment of the cultural identity of Palkyong area and the becoming of the educational cultural life space. The analysis of the landscape construction of Chonju Palkyong and the grouping of the modern successive plan which I considered in this thesis, will be able to become a fundamental data to carry out the preservation of historical landscape and the landscape plan in the city.

• Korean Institute of Interior Design Journal
• /
• v.15 no.6 s.59
• /
• pp.131-138
• /
• 2006

Contemporary society is lately going through various changes in social, economic, and cultural aspects due to rapid growth of information and computer technology. The digital revolution generated from the development of network reflects the decentralizing characteristic that connects local and personal interconnections. The following paper is designed to develop a basic understanding of digital architecture and show that digital virtual reality is not accidental phenomenon but it is actually evolved from nature and recreated in cyber space. The relationship between nature and digital architecture will be explained through the background research of how digital architecture was born and how it has been transformed. Also, it is designed to find out modern trends of digital architecture through diagrams and virtual space of hyper architecture and follow up the new phenomena appearing in the field of architecture. It is said that digital architecture is a new trend of architecture created from computer bit but all architecture that has form and shape cannot be independent of nature. Nature is the root of everything and even mechanical abstraction such as 'digital' can find its form in the immanence melted in the pure essence of nature. The research found that the nature approach of digital architecture also needs no more than 5 sequential references to find its genuine sketch as the hypertext theory shows we need only 5 sequential references to prove we are all related. Additionally, the cyber space that is become a general living space and a indispensable factor of digital architecture is a space that has obscurity and more open culture. It represents the characteristics of contemporaries in various aspects of society.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.37-42
• /
• 2012

LIFT (laser-induced forward transfer) is an advanced laser processing method used for selectively transferring micron-sized objects. In our study, this process was applied in order to deposit solder balls in microsystem packaging processes for electronics. Locally melted solder paste could be transferred to a rigid substrate using laser pulses. A thin glass plate with a solder cream layer was used as a donor film, and an IR laser pulse (wavelength = 1070 nm) was used to transfer a micron-sized solder ball to the receptor. Mass balance and energy balance were applied to analyze the shape and temperature profiles of the solder paste drops. The transferred solder bumps had measured diameters of 30-40 ${\mu}m$ and thicknesses of 50 ${\mu}m$ in our experiment. The limits and applications of this method are also presented.

• The Korea Journal of Herbology
• /
• v.33 no.1
• /
• pp.65-70
• /
• 2018

Objectives : The purpose of this study was to assume the size of one piece and decocting method of Asini Corii Colla in Treatise on Cold Damage Diseases written at the Eastern han Dynasty. Methods : I assumed the size of one piece and decocting method based on Treatise on Cold Damage Diseases and Prescriptions of the Gold Chamber, Essential Skill to Benefit the People, Classified Emergency Materia Medica, Illustration and Consideration of Plant's Name and Reality, Essential Prescriptions Worth a Thousand Gold, and other articles about Asini Corii Colla. And I compared these results with current merchandize in China, Dong-e E-jiao, China Resuorces DongeEjiao, and Furen Medicine Group Co., LTD. Results : Asini Corii Colla was made of the skin of cattle in Treatise on Cold Damage Diseases written at the Eastern han Dynasty. The weight of one Asini Corii Colla is equal to 6.5 g, which is equal to one rayng of Treatise on Cold Damage Diseases. The size of it is 3.5 cm in width, 9.0 cm in length and 0.17 cm in height. The specific gravity of it was 1.24. The general daily dose was two rayng and also melted in solution. Conclusions : It was easy to measure daily dose two rayng due to weight of one Asini Corii Colla, one rayng is equal to 6.5 g, and also to melt in solution becauase of its rectangular shape and 0.17 cm thickness.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.112-118
• /
• 2012

Steel industry produces many by-products and wastes such as blast furnace slag, electric arc furnace slag, and converter slag. As in the case of rock, the main component of steel slag are CaO and $SiO_2$ ; further, steel slag is as alkaline as portland cement or concrete. Electric arc furnace oxidizing slag is possible to use as an aggregate for concrete ; however, it has been reclaimed because of it's expansibility caused by free CaO. Recently, a innovative rapid cooling method for melting steel slag has been developed in Korea, which reduces free lime content to minimum level and increases the stability of iron oxide. Therefore, this study describes the results of a series of research to utilize globular shape of electric arc furnace oxidizing slag fine aggregates made by rapidly cooled method for the construction industry by cooling rapidly melted slag from the steel industry. First of all, an experiment was carried out to investigate the quality characteristics of rapidly cooled electric arc furnace oxidizing slag fine aggregates in order to determine whether they can be applied to the construction industry. Then, by applying them to concrete of various particle sizes, we explored experimentally the desired condition to apply rapidly cooled electric arc furnace oxidizing slag fine aggregates to concrete.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.7
• /
• pp.25-31
• /
• 2010

In this study, it was intended to suggest new cooling method that enables to improve the applicability and added value higher than existing slag by applying new cooling method(powder cooling slag) at the time discharging slag, which is produced from the ash melting system that the plasma torch is used for the first time in Korea. It is suggested the applicative direction in the development of future recycling process by discovering its nature of material and applicative possibility as earthwork material. The ashes produced after the sewage sludge discharged from Y city was incinerated by the fluidized bed method and was used as test materials. As result of XRF(X-Ray Flourescence Spectrometry) analysis, main ingredient of sewage sludge ashes was $SiO_2$(32%) besides CaO, $Al_2O_3$, $Fe_2O_3$, and so on. In addition, as result of XRD analysis, traditional diffuse pattern of glass could be found from granulated air-cooled slags, while a minor crystal phase could be observed from powder cooling slag, because the powder on the surface exists in the state not melted. From EDX(Energy Dispersive X-ray Spectroscopy) analysis, it is deemed that powder ingredient has no change before and after it is used as cooling medium, and accordingly it is thought that the powder can be produced as the material where the function is added if used in different shape.