• 소성∙가공
• /
• 제18권2호
• /
• pp.122-127
• /
• 2009

The injection mold with multi-cavity is essential for mass production of plastic products. Multi-cavity molds are designed to geometrically balanced runner system to uniformly fill to each cavity. However, despite geometrical balanced runner system, filling imbalances between cavity to cavity have always been observed in injection molding. To solve these problems, many studies such as Melt Flipper, RC Pin, and others have been presented. The results of these studies have been an effect on filling balances in multi-cavity molds. But, those have had a limitation that additional insert parts must have existed in the mold. In this study, a new runner system is suggested for filling balance between cavity to cavity using "Melt-Buffer" with simple change of runner shape. A series of simulation to confirm feasibility of Melt-Buffer's effects was conducted using injection molding CAE program. Also, a series of injection molding experiment was conducted using plastic materials such as ABS and PP. As results of this study, feasibilities of filling balances by Melt-Buffer were confirmed.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.19-22
• /
• 2013

Almost all injection molds have multi-cavity runner system for mass production, which are designed with geometrically balanced runner system in order to accomplish filling balance between cavity to cavity during processing. However, even though geometrically balanced runner is used, filling imbalances have been observed. So, many studies for improving filling balance in the multi-cavities molds are worked up. In this study, the Melt-Buffer which is a new runner system for filling balance has been suggested, and a series of experiment about degree of filling balance in cavity-to-cavity was conducted in the mold with the Melt-Buffer. From the experiment, the filling balance was increased up to 5~6% by using the Melt-Buffer.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.95-98
• /
• 2008

Almost all injection molds have multi-cavity runner system for mass production, which are designed with geometrically balanced runner system in order to accomplish filling balance between cavity to cavity during processing. However, even though geometrically balanced runner is used, filling imbalances have been observed. So, many studies for improving filling balance in the multi-cavities molds are worked up. In this study, the Melt-Buffer which is a new runner system for filling balance has been suggested, and a series of experiment about degree of filling balance in cavity-to-cavity was conducted in the mold with the Melt-Buffer. From the experiment, the filling balance was increased up to $5^{\sim}6%$ by using the Melt-Buffer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.661-662
• /
• 2009

• 한국환경과학회지
• /
• 제23권7호
• /
• pp.1339-1347
• /
• 2014

This study were performed on roadside buffer green in Songpa-dong, Songpa-gu, Seoul in order to analyze the anion concentration according to the type of composition of roadside buffer green. Buffer green separating the physical structure of the measurement points and measurement locations were separated by roadside, green interior, the other side of the road. planting density and deposit of trees per each buffer green was measured in the order of mounding type> slope type> the plain type. If the measured temperature of the location-specific weather elements roadside> inside> the other side of the road in order of measurement and the temperature is lowered farther away from the road. If the relative humidity of the road on the other side> inside> the roadside in order to measure and this is the opposite of the temperature tendency. According to physical structure reduction of the temperature on the other side of the road and roadside in order of mounding type> the plain type> slope type was measured. As a result of measuring a anion therefore concentration of the anion inside of melt is in order of mounding type> the plain type> slope type, tended to match the melt characteristics. According to measured positions anion concentration is in the order of the other side of the road> inside> the roadside was measured. As a result of correlation analysis, in the case of measurement location-specific weather and anions the temperature is positive correlation, relative humidity is negative correlation and that's results of previous studies were supported.

• 한국결정성장학회지
• /
• 제23권4호
• /
• pp.161-166
• /
• 2013

실리콘 기판 위에 GaN를 성장하기 위해서 AlN 완충층을 사용해 왔다. 그러나 AlN은 아직까지 high doping이 쉽지 않기 때문에, 이로 인해 AlN를 전자소자나 광소자 제작을 위한 완충층으로 이용하는 경우 직렬 저항의 증가라는 문제가 발생할 수 있다. 본 연구에서는 이러한 문제점을 개선하기 위해 AlN 완충층 대신에 금속 완충층을 사용하여 실리콘 기판 위에 GaN 박막 성장실험을 수행하였다. Al, Ti, Cr 그리고 Au 등을 금속 완충층으로 사용하여 실리콘 기판 위에 GaN 층을 성장하였다. 성장된 GaN 박막의 표면 특성을 분석하기 위해 광학현미경과 SEM을 사용하였고, 결정성과 광학적 특성을 평가하기 위하여 PL과 XRD 분석을 실시하였으며 AlN 완충층을 사용한 경우와 금속 완충층을 사용한 경우의 저항 차이를 확인하기 위하여 전류-전압 특성을 측정하였다.

• 한국전기전자재료학회논문지
• /
• 제30권1호
• /
• pp.1-6
• /
• 2017

Tungsten carbide (WC) has been suggested as a new buffer layer for the GaN-on-Si technology. We have investigated and optimized the sputtering condition of WC layer on the Si-substrate. We confirmed the suppression of the Si melt-back phenomenon. In addition, surface energy of WC/Si layer was measured to confirm the possibility as a buffer layer for GaN growth. We found that the surface energy(${\gamma}=82.46mJ/cm^2$) of WC layer is very similar to that of sapphire substrate(${\gamma}=82.71mJ/cm^2$). We grow GaN layer on the WC buffer by using gas-source MBE, and confirm that it is available to grow a single crystalline GaN layer.

• Bulletin of the Korean Chemical Society
• /
• 제19권6호
• /
• pp.680-685
• /
• 1998

Two kinds of new aliphatic diols were synthesized by the ring-opening reaction of lactide and glycolide with 1,4-butanediol, a difunctional initiator, in the presence of stannous octoate. The resulting aliphatic diols were melt-polymerized with D-tartaric acid at 150 ℃ to produce new crosslinkable polyesters. They were reacted with hexamethylene diisocyanate in THF at 65 ℃ in a teflon mold for 24 h to prepare sequentially ordered crosslinked polyesters (BD/LT/GL/D-tartarate). Degradation of the prepared yellow crosslinked films was carried out in a buffer solution in order to examine the effect of time, pH, temperature and crosslinking degree on their degradation rate and mechanism. The rate of degradation increased with an increase in pH and temperature, but it decreased with increasing degree of crosslinkage incorporated into the crosslinked polyesters. We also found that the crosslinked polymers were converted into the acidic compounds such as lactic, glycolic, and D-tartaric acids during the degradation.

• 폴리머
• /
• 제33권6호
• /
• pp.581-587
• /
• 2009

PLA와 PEG를 사용하여 용융블렌드 방법으로 PLA/PEG 블렌드 섬유를 제조한 후 in vitro 환경조건인 pH7.4, 온도 $37\;^{\circ}C$의 완충용액에서 1~8주 동안 가수분해한 다음 무게감량률 및 인장강도 등에 미치는 영향을 검토하였다. 가수분해 시간이 1주에서 8주까지 증가함에 따라 블렌드 시간은 10~30분으로, PEG 함량은 5~30 wt%로 증가할수록 PLA/PEG 블렌드 섬유의 무게감량률은 증가하는 경향이, 인장강도 및 인장탄성률은 감소하는 경향이 현저하게 나타남을 확인하였다. 결론적으로 가수분해 시간 2주까지는 PLA/PEG 블렌드 섬유의 무게 감량률은 약 0.9% 이내이고 강도유지율은 약 90% 이상을 나타냄으로써 임계상처치유기간 중 양호한 강도가 유지될 수 있음을 확인하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권1호
• /
• pp.1-6
• /
• 2020

This is a parameter study for the direct fabrication of a large grain YBCO bulk superconductors using Y₂O₃, BaCO₃ and CuO powders without any grinding step. The cracks, which have been formed due to volume contraction during calcination step, have been prevented by controlling the heating rate at 930~950 ℃. It has been observed that multi-grain growth has occurred due to the dissolution of Sm123 seed due to the retention of carbon in Ba-Cu-O melt. In order to accelerate the carbon release in prior calcination heat treatment, the reduction of pellet thickness and the drilling of artificial holes have been applied. Single-grain YBCO bulk superconductor has been successfully fabricated by stacking multiple thin slab. However, the crack formation has been rather prominent for the compact with artificial holes. The use of buffer pellet, which is supposed to act as diffusion barrier, has prevented the dissolution of Sm123 seed crystal and has led to the growth of single grain of high content of carbon containing specimen.