• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.655-661
• /
• 1999

${\beta}$-SiC formation mechanism in Si melt-C-SiC system with varying in size of carbon source was investigated. A continuous reaction sintering process using Si melt infiltration method was adopted to control the reaction sintering time effectively. It was found that ${\beta}$-SiC formation mechanism in Si melt-C-SiC system was directly affected by the size of carbon source. In the Si melt-C-SiC system with large carbon source ${\beta}$-SiC formation mechanism could be divided into two stages depending on the reaction sintering time: in early stage of reaction sintering carbon dissolution in Si melt and precipitation of ${\beta}$-SiC was occurred preferentially and then SIC nucleation and growth was controlled by diffusion of carbon throughy the ${\beta}$-SiC layer formed on graphite particle. Furthmore a dissolution rate of graphite particles in Si melt could be accelerated by the infiltration of Si melt through basal plane of graphite crystalline.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.42-46
• /
• 2009

With an aim of comparison, single grain Y-Ba-Cu-O (YBCO) bulk superconductors were fabricated using a liquid infiltration growth (LIG) process and a conventional melt growth (MTG) process with top seeding. The MTG process uses an $YBa_2Cu_3O_{7-x}$(Y123) powder as a precursor, while the LIG process uses $Y_2BaCuO_5(Y211)/Ba_3Cu_5O_8(Y035)$ pre-forms. The growth of a single Y123 domain on the top seed was successful in the both processes. Different feature between the two processes is the interior microstructure regarding the critical current density ($J_c$). The LIG-processed YBCO sample showed a lower porosity, more uniform distribution of Y211 particles and the enhanced Y211 refinement compared to the conventional MTG process. The $J_c$ improvement in the LIG process is attributed to the dispersion of finer Y211 particles as well as lower porosity within the Y123 superconducting matrix.

• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.610-618
• /
• 1997

반응용침법으로 제조된 $Al_2O_3$/Al 복합재료는 900-$1200^{\circ}C$의 온도범위에서 $Al_2O_3$ 분말성형체에 용융Al을 침투시켜 제조하였다. 용융침투는 각 온도에서 잠복기를 거친후 발생하였으며, 복합재료의 성장속도는 시간에 따라 선형적으로 비례하였다. 제조된 복합재료의 주성분은 $Al_2$O$_3$와 Al이었고 소량의 Si이 탐지되었다. 복합재료의 상대밀도는 $Al_2O_3$ 입자크기가 증가함에 따라 증가하였고 용융 침투온도가 높을수록 감소하였다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.64-64
• /
• 2007

• 한국결정성장학회지
• /
• 제13권3호
• /
• pp.99-104
• /
• 2003

용융침투법으로 알루미나/지르코니아-유리 복합체를 제조하여 지르코니아 첨가가 복합체의 기계적 및 광학적 특성과 유리 침투 kinetic에 미치는 영향을 조사하였다. 유리 침투시간이 증가할수록 침투깊이는 Washburn식에 의한 포물선관계로 증가하였으며 침투 상수인 K는 기공 크기의 함수로 지르코니아 첨가량이 증가할수록 기공 크기의 감소로 감소하였다. 지르코니아 양이 증가함에 따라 명도($L^*$)는 증가하지만 유리 침투 상수(K), 투과율(transmittance), 채도($C^*$)가 감소하였다. 지르코니아가 15 wt% 첨가될 때까지 알루미나/지르코니아-유리 복합체의 인성값 증가를 보였지만 기공률의 증가로 인하여 기계적 특성 향상에는 크게 기여하지 않았다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권3호
• /
• pp.27-31
• /
• 2019

Large grain YBCO bulk superconductors are fabricated by the top-seeded melt growth (TSMG) or top-seeded infiltration growth (TSIG) method. Both growth methods use at least one of $YBa_2Cu_3O_{7-{\delta}}$, $Y_2BaCuO_5$, $BaCuO_3$ pre-reacted precursor powders. However, the synthesis of the pre-reacted powders includes multiple calcination runs which are cost-bearing and time-consuming. In this work, we report the successful growth of single-domain YBCO bulk superconductors directly by using the powder compact that has been pressed from the mixture of $Y_2O_3$, $BaCuO_3$ and CuO powders without any intermediate grinding step. Single-domain YBCO bulk superconductor has been also prepared by using $Y_2O_3$, $BaO_2$ and CuO powders without intermediate grinding step. Investigations on the trapped magnetic field and microstructure of the melt-processed specimen show that the elimination of the repeated processes of calcinations and pulverization has hardly affected on the crystal growth and the magnetic properties of the grown YBCO bulk superconductors. However, it is thought that the presence of residual carbon affects on the size of Y211 particles in melt-processed YBCO bulk superconductor.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.63-63
• /
• 2007

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.174-180
• /
• 2000

Y-TZP/mullite composites were prepared by the infiltration of Y-TZP precursor into partially reaction-sintered mullite. The addition of Y-TZP(~7.2 wt%) increased the bend strength(207 MPa), fracture toughness(4.6MPa.m1/2) and Vickers microhardness(853kg/$\textrm{mm}^2$) of the uninfiltrated mullite sintered at 162$0^{\circ}C$ for 10h by more than 75, 70 and 105%, respectively. Residual alumina-rich glass was observed at a mullite/mullite junction, due to the mullitization reaction of silica melt with crystalline $\alpha$-Al2O3 during a final sintering. Although ZrO2 inclusions improved the final sintered density of mullite they did not effectively prevent its grain growth.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.995-1002
• /
• 1996

The TiC-(Ni/Ti) composites were prepared by reaction bonding between TiC preforms and the melted mixture of Ni/Ti metal the atomic ratio of which were the ranges of 0.3 to 3. And their microstructures phase composi-tions and mechanical properties were investigated. During reaction bonding Ni/Ti metal mixture had a good wettability an permeability with TiC preforms and pore-free and fully dense sintered bodies were fabricated. TiC particle shape changed from spherical to angular platelet-like and grain size was grown with Ni/Ti atomic ratio increasing from 0.3 to 1. whereas grain growth of TiC particle was restrained and its shape changed gain from angular platelet-like to spherical when Ni/Ti atomic ratio was more than 2. Maximum bending strength and fracture toughness were obtained at the Ni/Ti atomic ratio being 1 their values were 582 MPa and 11.1 MPa.m1/2 respectively.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.939-945
• /
• 2004

[ $SiO_2-B_{2}O_3-Al_{2}O_3-CaO-La_{2}O_3$ ]계 유리에서 $La_{2}O_3$를 변화시키며 다양한 조성의 유리를 만든 후 이를 다공성 알루미나에 침투시켜 알루미나-유리 복합체를 얻었다. 여기서 유리의 조성 변화에 따른 침투특성 및 기계적 강도의 변화를 관찰하였다. 유리중의 $La_{2}O_3$는 유리의 고온 점도를 감소시켜 유리의 젖음성과 유동성을 향상시키고 유리의 침투를 용이하게 한다. 유리가 다공성 알루미나에 침투하여 기공을 메우면서 일부 알루미나를 용해시킨다. 이 유리 용융물 중 $Al_{2}O_3$ 성분은 결정질 알루미나에 다시 석출하여 입자성장이 일어나는데 이때 특정 방향으로 알루미나 입자가 성장한다. $La_{2}O_3$가 20 몰 $\%$ 첨가된 유리를 침투시켰을 때 유리가 결정화하여 복합체의 강도를 증진시켰다.