• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.153-158
• /
• 2021

Purpose: This study evaluated the features of a pressure mapping system for patient motion monitoring in radiation therapy. Methods: The pressure mapping system includes an MS 9802 force sensing resistor (FSR) sensor with 2,304 force sensing nodes using 48 columns and 48 rows, controller, and control PC (personal computer). Radiation beam attenuation caused by pressure mapping sensor and signal perturbation by 6 and 10 mega voltage (MV) photon beam was evaluated. The maximum relative pressure value (mRPV), average relative pressure value (aRPV), the center of pressure (COP), and area of pressure distribution were obtained with/without radiation using the upper body of an anthropomorphic phantom for 30 minutes with 15 MV. Results: It was confirmed that the differences in attenuation induced by the FSR sensor for 6 and 10 MV photon beams were small. The differences in mRPV, aRPV, area of pressure distribution with/without radiation are about 0.6%, 1.2%, and 0.5%, respectively. The COP values with/without radiation were also similar. Conclusions: The characteristics of a pressure mapping system during radiation treatment were evaluated on the basis of attenuation and signal perturbation using radiation. The pressure distribution measured using the FSR sensor with little attenuation and signal perturbation by the MV photon beam would be helpful for patient motion monitoring.

• Ocean and Polar Research
• /
• v.44 no.4
• /
• pp.331-338
• /
• 2022

The high latitude scleractinian coral Alveopora japonica Eguchi, 1965 occurs in high density in the shallow rocky subtidal in Jeju Island, forming coral carpets. Despite its ecological role providing a unique habitat for other benthic organisms, the benthic fauna associated with the A. japonica coral carpet is poorly known. To identify fauna associated with the coral carpet, we explored three sites dominated by A. japonica and one control site on northwestern Jeju Island in May 2013. Using SCUBA, we collected A. japonica and the epibenthic mega-fauna associated with the colonies in 1×1 m² and identified them to the species level. At a depth of 10 to 15 m, A. japonica colonies heavily covered the seafloor, forming a layer called a coral carpet, with a density of 94 (Keumneung-ri), 133 (Biyangdo), and 155 (Gwidok-ri) colonies/m². Thirty-four molluscan species were identified from the four sites, including 20 bivalves and 14 gastropods. The coral carpets were enriched with sessile bivalves compared to the control site, as we identified twenty bivalve and eight gastropod species from the coral carpets. Most bivalve species associated with the coral carpets had tropical-subtropical affinities, while gastropods were mainly subtropical and subtropical-low boreal species. Leiosolenus lischkei M. Huber, 2010, in the family Mytilidae and Barbatia steamsi (Pilsbry, 1895), in the family Arcidae, were the two most abundant bivalve species in the coral carpet, L. lischkei being a borer, and B. stearnsi a nestler. The tropical to subtropical Pacific star shell Astralium haematragum (Menke, 1829)was the most abundant gastropod at the study sites. The bivalves and gastropods associated with the coral carpet were small-sized juveniles or sub-adults, suggesting that the coral carpet provides a micro-habitat for the bivalves and gastropods.

• Archives of Craniofacial Surgery
• /
• v.23 no.4
• /
• pp.152-162
• /
• 2022

Background: The efficacy and safety of equine cartilage as a competent xenograft material for rhinoplasty were evaluated and compared to the outcomes of rhinoplasty using silicone implants. Methods: We performed a multicenter, double-blind, non-inferiority, and randomized confirmatory study. Fifty-six patients were randomized 1:1 to the study group (using MegaCartilage-E) and control group (using silicone implants). The Rhinoplasty Outcome Evaluation (ROE) score, photo documentation, Global Aesthetic Improvement Scale (GAIS), and adverse event data were obtained until 12 months after surgery. The primary efficacy, which is the change in ROE score 6 months after surgery, was assessed in the modified intention-to-treat set. The secondary efficacy was evaluated in the per-protocol set by assessing the change in ROE score 6 and 12 months after surgery and nasofrontal angle, the height of the nasion, and GAIS 1, 6, and 12 months after surgery. Results: The change in ROE score of the study group was non-inferior to that of the control group; it increased by 24.26±17.24 in the study group and 18.27±17.60 in the control group (p= 0.213). In both groups, all secondary outcome measures increased, but there was no statistical difference. In the safety set, treatment-emergent adverse events occurred in 10 patients (35.71%) in the study group and six patients (21.43%) in the control group (p= 0.237). There were 13 adverse device events in the study group and six adverse device events in the control group (p= 0.515). Conclusion: Processed equine cartilage can be used effectively and safely as xenograft material for rhinoplasty.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.17-22
• /
• 2012

Wind blown sand is expected to disrupt the operation of the railway as the presented railway project in this paper consists of large earthworks in extreme topography of the mega dune fields. For successful railway construction in sand dune area, effective mitigation measure is the most important factor to protect the track from wind blown sand. The effective mitigation measure requires an integrated consideration of the earthworks geometry and the direct control measures such as fence system. Basically there's no perfect measure protecting railway track from wind blown sand, and it would be more economical and effective to develop robust, deliberate maintenance program for track and direct control measure on the basis of geo-morphological study. The purpose of this study is to identify the large scale geo-morphological terrains and specific sand dune morphology in the project area in UAE and estimate the direction and migration rate for sand dunes with the local variations in prevailing wind directions by undertaking literature review, and aerial photographs, satellite images, and ground studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.927-939
• /
• 2015

It appears that the rapid advance in technology has allowed to broaden the variety of rail systems technology, thereby fostering new business opportunity in rail industry. The direction of rail systems operations is mainly two fold. In one direction, long distance operations between mega cities are pursued with help of high speed trains under development. In the other case, relatively short distance operations for covering intra-city or suburban area are becoming popular. A good example of the latter case is light rail transit (LRT) systems. Due to the short distance operation, it is thus expected that both the development and operation cost for LRT systems be reduced to some extent. The cost reduction desired in there can be gained by scaling down the sizes of both the trains and stations as compared to those of normal rail systems. However, it is not well known how the LRT stations can be scaled down. The objective of this paper is to study on how to slim down the stations (particularly, the functions room) of LRT systems. To achieve the objective, an approach is studied based on a modified method of design structure matrix (DSM). Specifically, using the enhanced DSM method, an integrated architecture is developed for the functions room, in which equipments are housed to perform the functions of electricity, signaling, and communication for LRT stations. The use of the result indicates that the desired reduction can be obtained with the approach taken in the paper.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.65-71
• /
• 2018

Purpose : Standardized pillow may not support patient's individual cervical spine thoroughly when head and neck radiation therapy with $Tomotherapy^{(R)}$. Therefore, the purpose of this study was to make a comparative analysis for the difference of using standardized pillow only and using customized cervical spine immobilizer with standardized pillow. Materials and Methos : The head and neck cancer patients who are treated image-guided radiation therapy(IGRT) with $Tomotherapy^{(R)}$ were divided into two groups, 20 patients using standardized pillow only, and 20 patients using customized cervical spine immobilizer with standardized pillow. We achieved 20 mega-voltage computed tomography(MVCT) image per patient, compared curvature of the cervical spine in MVCT with curvature of the cervical spine in CT-simulation. Results : Results of comparative analysis were curvature consistency 95.9 %, maximum error of distance 41.9 mm, average distance error per fractionation 19.4 mm, average standard deviation 1.34 mm in case of using standardized pillow only, curvature consistency 98.9 %, maximum error of distance 12.9 mm, average distance error per fractionation 5.8 mm, average standard deviation 0.59 mm in case of using customized cervical spine immobilizer with standardized pillow. Conclusion : Using customized cervical spine immobilizer shows higher reproducibility and low distance error, therefore customized cervical spine immobilizer could be useful for head and neck cancer patients who need radiation therapy.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.2
• /
• pp.65-74
• /
• 2019

Purpose: Recently, A Catcher was added to prevent sagging in Radixact^® X9. In this study, We quantitatively compared general couch of Tomo-HDA^® with catcher couch of Radixact^® X9 using the human phantom and evaluated usefulness of catcher. Materials and methods: We used rando phantom for phantom study and set the each iso-center of head and neck region and Pelvis region for region parameter. Furthermore, We used hand made low melting point alloys for weight parameter. MVCT(Mega Voltage Computed Tomography) images were acquired for vertical error and rotation(pitch) error measurement increasing weight(A: 15kg, A+B: 30kg, A+B+C: 45kg). We selected 120 patients who has been treated using Tomotherpy machine for patient study. 60 patients has been treated in Tomo-HDA^® and the other 60 patients treated in Radixact^® X9. In the patient study methods, vertical error and rotation(pitch) error was measured for mean value calculation using MVCT images acquired on first day of radiation therapy. Result: Result of phantom study, Vertical error and rotation(pitch) error was increased proportionally increased as the weight increases in general couch of Tomo-HDA^®. each maximum value was 7.52mm, 0.38° in head and neck region and 11.94mm, 0.92° in pelvis region. However, We could confirm that there was stable error range(0.02~0.1mm, 0~0.04°) in Catcher couch of Radixact^®. Result of patient study, The head and neck region was measured 4.79mm 0.33° lower, and the pelvis region was measured 7.66mm, 0.22° lower in Catcher couch of Radixact^® X9. Conclusion: In this study, Vertical error and rotation(pitch) error was proportionally increased as the weight increases in general couch of Tomo-HDA^®. Especially, The pelvis region error was more increased than the head and neck region error. However, Vertical error and rotation(pitch) error was regularly generated regardless of weight or regions in Catcher^TM couch of Radixact^® X9 that this study's purpose. In conclusion, Catcher^TM couch of Radixact^® X9 can minimize mechanical error that couch sagging. Furthermore, The pelvis region is more efficiency than head and neck region. In radiation therapy using Tomotherapy machine, it is regarded that may contribute to minimizing unadjusted pitch error due to characters of Tomotherapy.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.240-245
• /
• 2013

Electrochemical surface treatment is commonly used to form a thin, rough, and porous oxidation layer on the surface of titanium. The purpose of this study was to investigate the formation of nanotubular titanium oxide arrays during short anodization processing. The specimen used in this study was 99.9% pure cp-Ti (ASTM Grade II) in the form of a disc with diameter of 15 mm and a thickness of 1 mm. A DC power supplier was used with the anodizing apparatus, and the titanium specimen and the platinum plate ($3mm{\times}4mm{\times}0.1mm$) were connected to an anode and cathode, respectively. The progressive formation of $TiO_2$ nanotubes was observed with FE-SEM (Field Emission Scanning Electron Microscopy). Highly ordered $TiO_2$ nanotubes were formed at a potential of 20 V in a solution of 1M $H_3PO_4$ + 1.5 wt.% HF for 10 minutes, corresponding with steady state processing. The diameters and the closed ends of $TiO_2$ nanotubes measured at a value of 50 cumulative percent were 100 nm and 120 nm, respectively. The $TiO_2$ nanotubes had lengths of 500 nm. As the anodization processing reached 10 minutes, the frequency distribution for the diameters and the closed ends of the $TiO_2$ nanotubes was gradually reduced. Short anodization processing for $TiO_2$ nanotubes of within 10 minutes was established.

• Review of Culture and Economy
• /
• v.20 no.1
• /
• pp.105-128
• /
• 2017

The purpose of this paper is to analyze the impact of distributors on the movie exhibition by distributor types. For the analysis, the concept 'screen elasticity of box office' is adopted. Using the weekly screening data of 94 hit movies released in Korea in 2014 and 2015, the panel analysis estimates the 'screen elasticity of box office' with the Hausman-Taylor estimator. The results show that the screen elasticity of box office is smaller for vertically integrated distributors(CJ E&M and Lotte Entertainment) and Hollywood distributors than the local distributors(Showbox and NEW) that do not own integrated cinemas. This means that exhibitors allocate a larger number of screens to vertically integrated distributors and Hollywood distributors. As the two distributor groups had higher market share during the period, the results imply that the screen elasticity is related to the market performance of distributors. Smaller screen elasticity of the vertically integrated distributors might be related not to the ownership to theaters but to higher market share of the distributors.

• Cross-Cultural Studies
• /
• v.44
• /
• pp.7-28
• /
• 2016

This study examines the sociocultural background of negritude by delving into Caseríos, Reggaeton, and $Trigue{\tilde{n}}os$, which are interrelated with the racism deeply embedded in Puerto Rican society. These terms have also been discussed in relation to the ideological discourse of racial democracy, which has caused Puerto Rican people to be blind to silenced inequality and hegemonic racial policies. Caseríos, housing projects for the poor urban class, are targeted by the state - sponsored project 'Mano Dura'. Due to the policing, control and surveillance of this anticrime project, Caseríos became perceived even more as residential communities of violence, poverty, and insecurity generally connected to the stigmatization of blackness. Reggaeton emerged as a mega hit genre of transnational Puerto Rican music in the 2000s, which in turn, drew attention to both the afrodiaspora in New York and the urban musical power in the Island. This musical genre serves to highlight the meaningfulness of black heritage in the national cultural identity of Puerto Rico. $Trigue{\tilde{n}}idad$ has recently become a common racial cultural term that embraces a broader racial paradigm of mestizaje. This term can function as an alternative concept of blackness, but it has not yet been transformed into enough cultural politics to resist ongoing racial democracy. The three terms intrinsically address both the uprooted racism and potential methods of challenging it. This paper argues the necessity of stronger and more responsive cultural politics to defy the pervasiveness and invisibility of racial discrimination in Puerto Rico.