• Korean Journal of Materials Research
• /
• v.30 no.1
• /
• pp.8-13
• /
• 2020

Effect of heat treatment on microstructure and mechanical properties of an Fe-6.5Mn-0.08C medium-manganese steel is investigated in this study. Three kinds of medium-manganese steel specimens are fabricated by varying heat treatments of intermediate quenching (IQ), step quenching (SQ), and intercritical annealing (IA). Hardness and tensile tests are performed to examine the correlation of microstructure and mechanical properties for the Fe-6.5Mn-0.08C medium-manganese steel specimens. The IQ and SQ specimens have microstructures of martensite matrix with ferrite, whereas IA specimen exhibits microstructure of acicular ferrite matrix with martensite. The tensile test results show that the SQ specimen with martensite matrix has the highest yield strength and the lowest elongation. On the other hand, the SQ specimen has the highest hardness due to the relatively lower reduction of carbon content in martensite during intercritical annealing. According to the fractography of tensile tested specimens, the SQ specimen exhibits a dimple and quasi-cleavage fracture appearance while the IQ and IA specimens have fully ductile fracture appearance with fine-sized dimples caused by microvoid coalescence at ferrite and martensite interface.

• The Korean Journal of Physiology
• /
• v.10 no.1
• /
• pp.55-59
• /
• 1976

Most investigators have come to stress two different concepts of mechanism controlling renin release; intrarenal baroreceptor theory and the macula densa theory(Vander 1967, Thurau and Masson 1974). In the macula densa theory, the specific macula densa parameter, most commonly suggested as a possible signal, is either the osmolality or the concentration of sodium in the tubular fluid (Thurau 1964, Vander and Miller 1964, Reeves and Sommers 1965). It has been shown that sodium plays an important role in the release of renin either in vivo (Thurau 1964, Vander and Miller 1964, Thurau et al 1972) or in vitro experiments(Oelkers et al 1970, Hammerson et al 1971, Michelakis 1971). On the other hand the osmolality appears to have no effect on the release of renin in vivo (Vander 1967, Thurau and Masson 1974). However, there has been little attempt to study the effect of osmolality on in vitro renin release. We therefore undertook the present investigation to elucidate the effect of osmolality on renin release and to further test the sodium influence upon the release of renin from isolated kidney slice preparations. Isolated renal cortical slices were washed with normal Krebs-Hensenleit bicarbonate buffer solution and incubated for 30 minutes in a medium containing an appropriate concentration of sodium and osmolality. The renin released into the medium was measured by the method of radioimmunoassay(Haber et al 1969). The results obtained are as follows; 1. The release of renin from renal cortical slices was progressively inhibited as the sodium concentration in the medium increased. 2. No significant alteration in renin release was observed when osmolality of the medium was changed. These results suggest that the release of renin from the renal cortical slices is directly affected by the changes in sodium concentration in the medium, but is not influenced by the alterations in osmolality.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.393-399
• /
• 2020

The use of different types of wastewater (WW) for the cultivation of microalgae and cyanobacteria during recent decades has provided important economic and environmental benefits. However, direct use of WW can lead to growth inhibition and biomass contamination. In the present study, we separated the key WW nutrients, namely nitrate and phosphate, by adsorption and regeneration and used the resulting regenerated water to cultivate the cyanobacterium Spirulina platensis. The adsorbent was granular γ-alumina derived from waste aluminum cans. This procedure recovered 19.9% of nitrate and 23.7% of phosphate from WW. The cyanobacterial cultures efficiently assimilated the nutrients from the medium prepared using regenerated WW, and the growth and nutrient uptake were similar to those in a synthetic medium. In addition, imposing nutrient limitations to increase carbohydrate productivity was easily achieved using regenerated wastewater nutrients, without requiring additional dilution or complex processing. In acute toxicity tests, the harvested biomass in a regenerated medium had similar toxicity levels compared to the biomass obtained from a synthetic medium. The proposed method of using regenerated WW to produce contamination-free biomass has broad potential applications.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.4
• /
• pp.267-271
• /
• 1998

Cotyledon explants of lettuce were cocultured with Agrobacterium tumefaciens LBA4404::pBKS-GR1 harboring glutathione reductase(GR) gene in MS medium supplemented with 0.1 mg/L NAA and 1.0 mg/L 2ip for 48 hr. These explants were transferred to MS medium supplemented with 0.1 mg/L NAA and 1.0 mg/L 2ip, 50 mg/L kanamycin, and 500 mg/L carbenicillin. After 4 weeks of subculture, kanamycin-resistant shoots were obtained on selection medium. Leaves of putative transformants survived on selection medium containing 100 mg/L kanamycin. Incoporation of the GR gene into lettuce was confirmed by PCR analysis of genomic DNA. Southern blot analysis showed that ECL-labeled GR gene was hybridized to the expected amplified genomic DNA fragment of about 1.8 kb from transgenic lettuce. The presence of mRNA in transgenic lettuce was confirmed by RT-PCR with total RNA of transgenic lettuce. In progeny test of transformants, R$_1$ seeds were resistant to kanamycin (200mg/L) on MS medium.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.416-421
• /
• 2011

This study was initiated to prevent rear-end collision which causes the most frequent human damage by agricultural tractors. Therefore, this study was aimed to evaluate the luminous performance of a stop lamp for an agricultural tractor which could reduce rear-end collision. The performance test of luminous intensity distribution was conducted for a total of 12 tractor models classified by size (above 44 kW for large, 30~43 kW for medium, and below 29 kW for small) and production area (domestic, foreign manufacture) in accordance with Regulation No.7 of UNECE Vehicle Regulations-1958 Agreement considering ${\pm}$20 standard deviation. Three out of 5 large, 3 out of 4 medium, and all small tractors were resulted as inadequate for the test criterion. This study found that the luminous performance results were better as the size of agricultural tractors became bigger. One out of 4 foreign and 2 out of 8 domestic manufacturers were suitable for the test criterion, and overall no difference from the luminosity test results was observed between domestic and foreign manufacturers. In addition, the measuring points, HV, 5L, 5R, 5U and 5D with the minimal luminosity revealed flaws (80% of the proportion of faulty products). Therefore, it is urgent to improve the quality for measuring points (HV, 5U, 5L, 5R, 5D) of stop lamps to apply Regulation No. 7.

• Journal of radiological science and technology
• /
• v.34 no.2
• /
• pp.149-156
• /
• 2011

This study is to identify perceptions and response degrees of anxiety for each factor, targeting patients for CT test and analyze the relations between factors. It is to provide scientific fundamental data to reduce anxiety by improving awareness of patients about CT test by analyzing relations between variables. The subjects of this study were surveyed in self-writing type, targeting 263 patients for CT test in the department of radiology at three University hospitals from July to September, 2010. This survey was executed once by a structured self-administered survey type. The targeting patients for CT test of anxiety will investigate for affect. Anxiety by each CT test variables depending on CT test-related features showed independent variable is Expense Responsibility, Economic burden, Sufficient explain, Explain agent, Endoscope, Biopsy, Pre treatment, Previous experience, CT side effect experience, Side effect of contrast medium and dependent variable is physical, Hospital staff, Hospital environment, Socioeconomic These used statistics program SPSS (ver. 13.0). Summarizing the above results of this study, awareness of anxiety and response to it in each variable under CT test appeared significant differences in economic burdens, state anxiety, pre-treatment anxiety, exposure anxiety to radiation, and anxiety of side effect. Therefore, pre-treatment before test and pre-training programs on chemical poison of contrast medium and side effect seem to be able to release patients' anxiety level for CT test. Ways to meditate these anxiety variables and reduce degree of anxiety are needed to be researched more and updated. In addition, impact of patients' economic burdens on CT test anxiety is required to be recognized and solved in society level.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.243-247
• /
• 2004

The dynamometers which had made in a long time ago could not control the input/output quantity of water minutely and was sensitive to a noise since it was controlled by an analog control method. Therefore, a fully digital controlled system was urgently required to be robust against various noises. In this paper, the new system which can control the amount of circulated water in dynamometer was developed. This system is consisted of an industrial digital type controller and a servo motor. The industrial PLC was used as a main controller for the developed system, and the actuator and servo motor were used to control the inlet and outlet valve independently. The torque signal of load cell was fed back to the main controller to regulate the diesel engines load. Generally, an input/output valve position of the old dynamometer was fixed with a proper situation for an engine output test and the torque was changed according to the time interval. However, the torque value for the dynamometer could not be constantly kept because of the variation of the input water flow and fluid characteristic. Therefore, the automatic control of an inlet and outlet valve should be performed to keep the constant torque. So, the PID control method was applied to solve this problem. Also, the development of a web-based remote control system was described in this paper. This software will give us the convenience of operation, the more efficient operations, and the reduced operator workload for operation of the dynamometer. The application results of the system have been verified at actual diesel engine field.

• Journal of Veterinary Clinics
• /
• v.8 no.2
• /
• pp.147-152
• /
• 1991

Trichophyton mentagrophytes was described as a primary cause of mycotic dermatitis in two young goats housed together in a humid, ill-ventilated and unhygienic byre. The diagnosis in both the cases was established on the detection of fungal element in the skin scrapings by potassium hydroxide technique and isolation of the pathogen in pure growth on mycological medium at 30$^{\circ}C$. The lesions were found on the face of one kid and on the neck and ear of another one. Two adult goats housed in the same enclosure were found to be free from this disease. Further, there was no evidence of ringworm in the goat owner and his family members. Genetic crossing of both the isolates on modified sunflower seed medium indicated that they belonged to (―) mating type. Hair performation test revealed the keratolytic activity of both the strains of T. mentagrophytes. The public health significance and chemotherapy are also discussed. The question of source of infection could not be emphatically established.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.1
• /
• pp.42-48
• /
• 1995

The purpose of this study is to evaluate the efficacy of metabolites produced form Streptomyces rimosus in controlling the growth of sapwood - inhabiting fungi. In order to carry out this task, the following specific fungi were tested : sapstain fungi - Ceratocystis pilifera, Ceratocystis piceae, and Aureobasidium pullulans ; mold fungi - Trichoderma hazianum, Trichoderma viride, Penicillium cirtrinum, and Aspergillus niger. Based on the tests, the following observations can be drawn. 1. The conidial germination of sapstain and mold fungi was completely inhibited leaving a clear zone around the paper disc treated with metabolites. The best inhibition was observed in A. pullulans plate and the least in T. viride. 2. Concentration of SB medium for the production of metabolites from St, rimosus affected antifungal activity of metabolites against sapwood - inhabiting fungi. Metabolites prepared from 1/3${\times}$SB medium showed the best activity and the least activity was observed in metabolites form 1/4${\times}$medium. 3. in vivo and in vitro test using wood blocks, treatment of pine sapwood blocks with metabolites also inhibited conidial germination and thus prevented discoloration. 4. Treatment with metabolites did not change the macroscopic structure of wood and did not cause the discoloration of the surface of wood by pigments produced form St. rimosus. In conclusion the results of this study indicate that antifungal metabloites of St, rimosus could be used for the biological control of sapstain and mold fungi.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.43-61
• /
• 1990

The laser reflexion method is a new technique which permits precise contactless measurement and observation of tooth mobility as well as tooth movement. The purposes of this study were to clarify the reliability of the laser reflexion method in clinical application and to measure the abutment tooth movement according to clasp design. This study was designed to determine 1) How much a bending movement of the impression plate stand affects the position of the reflexion pattern and how precise the patient bites into plate 2) Which clasp design causes greater movement of the abutment tooth. Under medium and maximum bite forces, tests were performed on central loading position which was 13mm distal to terminal abutment tooth of distal extension removable partial denture. The movement in the mesiodistal and buccolingual directions was measured. The Duncan's New Multiple-Range test was used to compare the means for the four castings under each direction-load combination; and the paired sample t-test was for medium and maximum bite forces. From this experiment, the following results were obtained. 1. The Roach clasp, the combination clasp, the RPI clasp, and the Akers clasp did not significantly differ in their effects on buccolingual movement of the abutment tooth. 2. The direction of abutment tooth movement was not significantly altered by clasp design and all abutment tooth movements were oriented distobuccally. 3. Under medium bite force, the Akers clasp caused greater distal movement of the abutment tooth than did the combination clasp and the RPI clasp. Under maximum bite force, the Akers clasp caused greater distal movement of the abutment tooth than did the RPI clasp. 4. The testing apparatus and procedures used in this study(laser reflexion method) proved to be reliable in clinical application.