• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.235-246
• /
• 2021

This study analyzed the effects of SMEs' open innovation capabilities and organization capabilities to lead these innovations on corporate performance. For this purpose, an empirical analysis was conducted targeting 250 small and medium-sized enterprises(SMEs) employee. The empirical study results are as follows. Absorptive capability, relational capability, CEO's innovativeness, employee's innovativeness, and decision-making openness had a significant positive (+) effect on the non-financial performance of SMEs. It was analyzed that multiplicative capability did not significantly affect non-financial performance. On the other hand, absorptive capability, relational capability, CEO's innovativeness, and decision-making openness had a significant positive (+) effect on the financial performance of SMEs. It was analyzed that multiplicative capability and employee's innovativeness did not significantly affect financial performance. Decision-making openness and absorptive capability were analyzed as factors that have an most important influence on a company's financial and non-financial performance. Based on these research results, academic and practical implications were presented.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.422-429
• /
• 2022

A light sensor chip requires a small capacity eFuse (electrical fuse) OTP (One-Time Programmable) memory IP (Intellectual Property) to trim analog circuits or set initial values of digital registers. In this paper, 128-bit eFuse OTP IP is designed using only 3.3V MV (Medium Voltage) devices without using 1.8V LV (Low-Voltage) logic devices. The eFuse OTP IP designed with 3.3V single MOS devices can reduce a total process cost of three masks which are the gate oxide mask of a 1.8V LV device and the LDD implant masks of NMOS and PMOS. And since the 1.8V voltage regulator circuit is not required, the size of the illuminance sensor chip can be reduced. In addition, in order to reduce the number of package pins of the illumination sensor chip, the VPGM voltage, which is a program voltage, is applied through the VPGM pad during wafer test, and the VDD voltage is applied through the PMOS power switching circuit after packaging, so that the number of package pins can be reduced.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.30-30
• /
• 2001

The culture of preantral follicles has important biotechnological implications through its potential to produce the large quantity of oocytes for embryo production, transgenesis research, conservation of rare breed, and a potential source of ovarian genetic material. The present study was conducted to establish the optimal conditions of in vitro culture for intact bovine preantral follicles; and to examine the developmental ability of oocytes derived from the in vitro-grown preantral follicles; and to investigate the effects of various concentrations of FSH and LH on these processes. Bovine preantral follicles (150 $\pm$ 1.2${\mu}{\textrm}{m}$), surrounded by theca cell, were isolated enzymetically and mechanically from ovarian cortical slides in Leibovitz L-15 medium containing 1 mg/$m\ell$ collagens and 0.2 mg/$m\ell$ DNase I and cultured for 25 days in the presence of different concentrations of bovine FSH and LH in $\alpha$MEM medium with insulin, transferrin, and selenite. The survival was tested by frypan Blue and Hematoxylin. The survival and growth rates of follicles were higher in FSH treatment groups than these in control (P<0.001), but there were no significant differences between the LH treatment groups and the control. In 25 days, the survival and growth rates of follicles in FSH and LH treatment group (50%, 300$\pm$1.0${\mu}{\textrm}{m}$) were higher than in FSH treatment group (40%, 244$\pm$0.5${\mu}{\textrm}{m}$) and the control group (25%, 160$\pm$ 1.0${\mu}{\textrm}{m}$). Fifty-five percent of healthy antral follicles were obtained, and 60% of the oocytes complete meiotic maturation to the metaphase II stage. Twenty-two percent of the mature oocytes underwent cleavage, and 9% developed to the blastocyst stage. In this study, in vitro-grown oocytes (111 $\pm$ $1.5mutextrm{m}$), under our culture conditions, were not equivalent in size to the in vivo-grown oocytes (130$\pm$1.3${\mu}{\textrm}{m}$). Therefore, these results suggest that bovine preantral follicles with intact theca cell can grow to the antral stage in 25days, and that oocytes from those follicles can acquire the meiotic competence and normally undergo fertilization and development to the blastocyst stage. However, the developmental capacity of in vitro-grown oocytes is presumably not comparable to those of the in vivo counterparts.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.10-19
• /
• 2013

Recently, researches related to precast modular construction have been actively conducted for nuclear power plant, LNG gas tank, and small-medium PCCV as well as bridges and buildings. In this study, the precast panel cast with steel mesh reinforced mortar (SRM) which is similar reinforced ferrocement was developed for efficient precast construction, construction time reduction, and easy transportation. Mortar mixture with high strength and flowability was obtained from various case studies using silica fume and GGBS. Also, $1,200{\times}600{\times}150mm$ SRM and reinforced concrete (RC) panels were manufactured with reinforcing ratio of 2% and 4%. To verify structural performance of the SRM specimen, the basic material tests, free shrinkage test, and 3-point flexural test with a line loading were carried out. From the test results, it was determined that SRM specimens showed outstanding flexural capacity and ductility. However, the 4% reinforced SRM specimens must consider shear reinforcing to be used as a precast modular member.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.167-174
• /
• 2016

Underwater communication is difficult to increase the communication capacity because the carrier frequency is lower than that of radio communications on land. This is limited to the bandwidth of the signal under the influence of the characteristics of an ocean medium. As the high transmission speed and large transmission capacity have become necessary in the limited frequency range, the studies on MIMO (Multiple Input Multiple Output) communication have been actively carried out. The performance of the MIMO communication is lower than that of the SIMO (Single Input Multiple Output) communication because cross-talk occurs due to multiusers along with inter symbol interference resulting from the channel characteristics such as delay spread and doppler spread. Although the adaptive equalizer considering multi-channels is used to mitigate the influence of the cross-talk, the algorithm is normally complicated. In this paper, time reversal mirror technique with the characteristic of a self-equalization will be applied to simplify the compensation algorithm and relieve the cross-talk in order to improve the communication performance when the signal transmitted from two channels is received over interference on one channel in the same time. In addition, the performance of the MIMO communication based on the time reversal mirror is verified using data from the SAVEX15(Shallow-water Acoustic Variability Experiment 2015) conducted at the northern area of East China Sea in May 2015.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.1163-1186
• /
• 2013

Big science such as nuclear fusion accelerators shares the characteristic of requiring long-term and massive budget input, human power, and related state-of-the-art technology. Because big science, by nature, thus requires large-scale budgets and facilities yet harbors the possibility of failure, most projects are led by the government. When the actual circumstances are examined, however, such projects are often implemented through the formation of cooperative relations with small and medium businesses (SMBs) possessing outstanding technological capacity. On the other hand, the reality is that the entry of corporations into the business ecosystem of big science is not easy and that even those that have once entered big science likewise fail to find sales outlets for technology that they have developed following the supply of single items, thus leading their technological capacity to lie idle. Consequently, based on an awareness of the problem, the present study seeks to propose strategies for activating the business ecosystem of nuclear fusion and accelerators and to present alternatives regarding which policy tasks must be pursued first by using the analytic hierarchy process (AHP) technique. The present study derived the four policy alternatives of approach, care, expansion, and infrastructures in accordance with the results of empirical analysis to activate the business ecosystem of nuclear fusion and accelerators and analyzed their priority in terms of urgency and effectiveness, the results of which were, in this order: care-approach-expansion-infrastructures. The significance of such research results lie in presenting the policy direction when the government determines which policy task must be pursued first and implements strategies for the activation of the business ecosystem of nuclear fusion and accelerators with limited financial resources in the future.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.445-452
• /
• 2019

In this study, parallel processing codes of k-means clustering algorithm were developed and implemented in a PC-cluster for unsupervised classification of large satellite images. We implemented intra-node code using multicores of CPU (Central Processing Unit) based on OpenMP (Open Multi-Processing), inter-nodes code using a PC-cluster based on message passing interface, and hybrid code using both. The PC-cluster consists of one master node and eight slave nodes, and each node is equipped with eight multicores. Two operating systems, Microsoft Windows and Canonical Ubuntu, were installed in the PC-cluster in turn and tested to compare parallel processing performance. Two multispectral satellite images were tested, which are a medium-capacity LANDSAT 8 OLI (Operational Land Imager) image and a high-capacity Sentinel 2A image. To evaluate the performance of parallel processing, speedup and efficiency were measured. Overall, the speedup was over N / 2 and the efficiency was over 0.5. From the comparison of the two operating systems, the Ubuntu system showed two to three times faster performance. To confirm that the results of the sequential and parallel processing coincide with the other, the center value of each band and the number of classified pixels were compared, and result images were examined by pixel to pixel comparison. It was found that care should be taken to avoid false sharing of OpenMP in intra-node implementation. To process large satellite images in a PC-cluster, code and hardware should be designed to reduce performance degradation caused by file I / O. Also, it was found that performance can differ depending on the operating system installed in a PC-cluster.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.654-661
• /
• 2000

Area of greenhouse increases rapidly up to 45,265ha by the year of 1998 in Korea. Hot air heater with light oil combustion is the most common heater for greenhouse heating in the winter season. However, exhaust gas heat discharged to atmosphere through chimney reaches up to 10~20% of total heat of the oil combusted in the furnace. In order to recapture the heat of this exhaust gas and to recycle for greenhouse heating, the heat pipe type exhaust heat recovery system was manufactured and tested in this experiment. The exhaust heat recovery system was made for space heating in the greenhouse. The system consisted of a heat exchanger made of heat pipes, ${\emptyset}15.88{\times}600mm$ located in the rectangular box of $600{\times}550{\times}330mm$, a blower and air ducts. The rectangular box was divided by two compartments where hot chamber exposed to exhaust gas in which heat pipes could pick up the heat of exhaust gas, and by evaporation of the heat transfer medium in the pipes it carries the heat to the cold compartment, then the blower moves the heat to greenhouse. The number of heat pipe was 60, calculated considering the heat exchange amount between flue gas and heat transfer capacity of heat pipe. The working fluid of heat pipe was acetone because acetone is known for its excellent heat transfer capacity. The system was attached to the exhaust gas path. According to the performance test it could recover 53,809 to 74,613kJ/hr depending on the inlet air temperature of 12 to $-12^{circ}C$ respectively when air flow rate $1,100\textrm{m}^3/hr$. The exhaust gas temperature left the heat exchanger dropped to $100^{circ}C$ from $270^{circ}C$ by the heat exchange between the air and the flue gas, the temperature difference was collected by the air and the warm air temperature was about $60^{circ}C$ at the air flow rate of $1,100\textrm{m}^3/hr$. This heat pipe type exhaust heat recovery system can reduce fuel cost by 10% annually according to the economic analysis.

• Journal of Korea Water Resources Association
• /
• v.41 no.1
• /
• pp.65-74
• /
• 2008

The small and medium sized dams have the fill dam type of a lot of occasions, which are often weak in cases of major floods. For this reason, although a countermeasure is in great need, due to the importance of the facilities and financial situations, no direct safety measures have been taken. In this study, in order to minimize construction expenditure for practical safety measures in cases of major floods, the overflow section of spillway has been analyzed focusing on how the overflow capacity will increase in the case of partially rebuilding a part of the overflow section of spillway favorable for hydraulic conditions. The Labyrinth weir and movable weir was chosen for reconstruction models of the overflow section. Moreover, for analyzing the after-effects of the reconstruction, a small scale dam was temporarily chosen for various experiments such as the hydraulic model testing and the three dimension numerical evaluation through the use of Flow-3D.

• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.185-190
• /
• 2001

Alginate, a well-known biopolymer, is universally applied for immobilization of microbial cells. Biosorption characteristics of lead by waste biomass of immobilized A. niger beads, used in fermentation industries to produce citric acid, were studied. The immobilized A. niger beads, prepared via capillary extrusion method using calcium chloride, were applied in the removal of lead. Pb uptake was the highest in A. niger beads cells grown for 3 days with medium producing citric acid (12% sucrose, 0.5% $NH_4NO_3$, 0.1% $KH_2PO_4$, and 0.025% $MgSO_4$). Lead uptake by the immobilized A. niger beads and free A. niger mycellia beads increased sharply with time. However, while uptake by the immobilized A. niger beads continued to increase slowly, that by free A. niger mycellia beads stopped after 30 min. The optimum pH and temperature of lead uptake were found to be 6 and $35^{\circ}C$, respectively. The maximum uptake of lead was achieved with $50{\sim}100$ beads and 50 ml lead solution in a 250-ml Erlenmeyer flask, while, at over 100 beads, uptake of the lead decreased. The order of biosorption capacity for heavy metals was Pb>Cu>Cd. Pb uptake capacity of the immobilized A. niger beads treated with 0.1 M $CaCI_2$, 0.1 M NaOH, and 0.1 M KOH decreased compared to the untreated beads. On testing the desorption of Pb from the immobilized A. niger beads, re-uptake of Pb was found possible after desorption of the binding metal with 0.1 M HCI.