• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.14-22
• /
• 2008

This study is aimed at suggesting a linear-type diffuser which is excellent in terms of range and elegance like existing diffusers in which amount and direction of wind can be freely controled, out of linear-type diffusers with the highest possibility to be adopted for living space of apartments whose height between floors is not so high and utilizing the linear-type diffuser in design. For the purpose, I examined necessary flow and noise properties of linear-type diffusers. Besides, I evaluated its ventilation capacity for persons in there by applying this in the actual living space. I evaluated features and air blast and found that in time of horizontal and vertical effusion, its T/L ratio is 1-1.5, similar to existing cardioid-type linear diffusers, while in time of slope effusion, it is similar to horizontal effusion in terms of range and it has medium figure in terms of pressure drop and effusion speed, indicating it can provide safe and pleasant indoor environment for persons in there in terms of ventilation.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1176-1181
• /
• 2004

In high-capacity disk drives with ever-growing track density, the allowable level of position error signal(PES) is becoming smaller and smaller. In order to achieve the high TPI(track per inch) disk drive, it is necessary to improve the writing accuracy during the servo track writing(STW) Process through the reduction of track mis-registration sources. Among the main contributors of the non-repeatable runout(NRRO) PES, the disk vibration and the head-stack assembly vibration is considered to be one of the most significant factors. Also the most contributors of repeatable runout(RRO) come from the contributors of NRRO which is written-in at the time of STW process. In this paper, the effect of NRRO on servo written-in RRO is Investigated by experimentally, and the experimental result shows that the written-in RRO can be effectively reduced through a STW process under low dense medium condition such as semi-vacuum.

• Steel and Composite Structures
• /
• 제36권3호
• /
• pp.273-291
• /
• 2020

Two-storey X-bracings are currently very popular in European practice, as respect to chevron and simple X bracings, owing to the advantages of reducing the bending demand in the brace-intercepted beams in V and inverted-V configurations and optimizing the design of gusset plate connections. However, rules for two-storey X braced frames are not clearly specified within current version of EN1998-1, thus leading to different interpretations of the code by designers. The research presented in this paper is addressed at investigating the seismic behaviour of two-storey X concentrically braced frames in order to revise the design rules within EN1998-1. Therefore, five different design criteria are discussed, and their effectiveness is investigated. With this aim, a comprehensive numerical parametric study is carried out considering a set of planar frames extracted from a set of structural archetypes that are representative of regular low, medium and high-rise buildings. The obtained results show that the proposed design criteria ensure satisfactory seismic performance.

• Archives of Pharmacal Research
• /
• 제24권1호
• /
• pp.69-73
• /
• 2001

Biodegradable hydrogels based on glycidyl methacrylate dextran (CMD) and dimethacrylate poly(ethylene glycol) (DMP) were proposed for colon-specific drug delivery. GMD was synthesized by coupling of glycidyl methacylate with dextran in the presence of 4-(N, N-dimethylamino)pyridine (DMAP) using dimethylsulfoxide as a solvent. Methacrylate-terminated poly (ethylene glycol) (PEG) macromer was prepared by the reaction of PEG with methacryloyl chloride. CMD/DMP hydrogels were prepared by radical polymerization of phosphate buffer solution (0.1 M, pH 7.4) of GMD and DMP using ammonium peroxydisulfate (APS) and UV as initiating system. The synthetic GMD, DMP and GMD/DMP hydrogels were characterized by fourier transform infrared (FT-lR) spectroscopy. The FITC-albumin loaded hydrogels were prepared by adding FITC-albumin solution before UV irradiation. Swelling capacity of GMD/DMP hydrogels was controlled not only by molecular weight of dextran, but also by incorporation ratio of DMP Degradation of the hydrogels has been studied in vitro with dextranase. FITC-albumin release from the GMD/DMP hydrogels was affected by molecular weight of nextran and the presence of dextranase in the release medium.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.151-156
• /
• 2010

모노레일은 전철의 최첨단 시스템을 적용하여 버스 규모의 크기로 운용할 수 있는 중소형 교통수단으로서 각 장치들에 대한 소형, 경량화가 무엇보다 중요하다. 세계 최초로 도입한 중앙 안내 방식의 도심관광형 월미모노레일 또한 소형, 경량화 된 장치들로 구성되어있으며, 특히 열이 많이 발생하는 추진 시스템(인버터, 모터)을 소형, 경량화 하기 위해 집중적인 연구와 시험이 이루어졌다. 본 연구에서는 고효율의 추진 시스템을 소형, 경량화 할 수 있는 수냉식 냉각 구조 및 방법에 관한 해법연구와 함께 에너지 절감에 효과적인 제어방식을 제시하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.39-44
• /
• 2009

Geothermal energy is the heat contained in the earth and its internal fluids. Geothermal energy is stored as sensible or latent heat. Supplied by both internal and external sources, it represents a vast supply which is only started to be tapped for generation of electric power. In general, this is natural dry or wet medium to high enthalpy steam at temperatures above $150^{\circ}C$. For some time, binary systems employing substances with a lower boiling point than water in a secondary circuit have been used to generate vapor for driving turbines at a lower temperature level. The utilization of binary plants and the possibility of production from enhanced geothermal systems can expand its availability on a worldwide basis. The geothermal electricity installed capacity is approaching the 10,000GW threshold. Geothermal energy is not present everywhere, but its baseload capability is a very important factor for its success.

• 한국유기농업학회지
• /
• 제25권4호
• /
• pp.749-758
• /
• 2017

This Research was the standardization of nutrient sources by reviewing the possibility of cultivation and analysis of imported nutrient sources used in Pleurotus ostreatus culture. As a first result, the concentration of heavy metals was not detected or trace, and the total nitrogen content of cotton seed pomace was 6.22% in Australia, which was higher than that of Chinese or USA. As a second result of physical properties of nutrient sources, the water holding capacity of beet pulp from Egypt was higher with increasing pressure. The volume water content of US was highest at 400hpa and 500hpa in case of cottonseed meal. Third, the content of total nitrogen was the highest at pH 5.51 and the total nitrogen content was the highest at 2.45, and the C/N ratio was the highest at 28.18. Last result shows that first germination day, yield and biological effciency of all treatments were not significant differnet except T2. These results shows that australian cootton was inappropriate to Pleurotus ostreatus culture. Nevertheless, the safety and standardization of the Pleurotus ostreatus culture medium should be assured by reviewing the media low material importing season, mushroom yield and nutrient sources.

• 한국식품영양학회지
• /
• 제27권2호
• /
• pp.287-293
• /
• 2014

The physicochemical characteristics of 4 domestic wheat flour products were compared to those of 4 imported wheat flour products marketed in Korea. The contents of moisture, ash, protein, total dietary fiber (TDF), color (L, a, b), whiteness, solvent retention capacity (SRC), water absorption index (WAI), water soluble index (WSI), pasting characteristics by rapid visco analyzer (RVA), and principle component analysis (PCA) were analyzed. The domestic wheat flour products were composed of higher content in ash and protein, compared to the imported wheat flour products. The domestic wheat flour products had lower SRC and WSI characteristics than the imported wheat flour products. The values of lactic acid SRC (LASRC) in the imported wheat flour products showed an increasing trend as the protein content increased. The differences in viscosity were observed in the domestic wheat flour products. However, no major significant differences of viscosity were found among the imported wheat flour products. The result of PCA showed a consistent trend in the imported wheat flour (strong, medium, and weak), while a consistent trend was not shown in the domestic wheat flour products. Therefore, further research is needed to standardize the different types of domestic wheat flour products.

• Steel and Composite Structures
• /
• 제37권1호
• /
• pp.1-14
• /
• 2020

Composite beams with corrugated steel webs represent a new innovative system which has emerged in the past decade for medium span in the construction technology. The use of composite beams with corrugated steel webs results in a range of benefits, including flexible spaces and reduced foundation costs in the construction technology. The thin corrugated web affords a significant weight reduction of these beams, compared with hot-rolled or welded ones. In the current research, an optimal designed I-girder beam with corrugated web has been proposed to improve the structural performance of continuous composite girder under bending moment. The experimental program has been conducted for six simply supported composite beams with different loading conditions. The tested specimens are designed by using one of the stochastic techniques called hunting search algorithm. In the optimization process, besides the thickness of concrete slab and studs, corrugated web properties are considered as design variables. The design constraints are respectively implemented from Eurocode 3, BS-8110 and DIN 18-800 Teil-1. The last part of the study focuses on performing a numerical study on composite beams by utilizing finite element analysis and the bending behavior of steel girders with corrugated webs experimentally and numerically verified the results. A nonlinear analysis was carried out using the finite element software ANSYS on the composite beams which were modelled using the elements ten-node high order quadrilateral type.

• Strategy21
• /
• 통권36호
• /
• pp.121-149
• /
• 2015

This paper will examine some past and current issues concerning the Republic of Korea's national strategy, focusing predominantly upon how the ROK should respond to the urgent maritime-oriented strategy highlighted by the recent developments and achievements of national prosperity achieved during last three decades and identify some of successful cases in East Asia. Some consideration will also be given to more general emergent issues of trends and developments of East Asian countries which might affect to define the ROK's future national strategy in the context of its national grand strategy to enhance national interests and prosperity. ROK is especially dependent upon open Sea Lanes of Communication (SLOC) and its national security emphasizes the sea as the medium of geopolitical and geo-economic development, given the sea known as core geographic option remains that ROK is an important maritime power, ranking the world-level nation in term of GDP, sea-borne trade, container processing capability, shipbuilding capacity and so on. It should be apparent, therefore, that ROK's national strategic development depends upon the relationship between its peninsula geography and its national development based on sea-borne economic growth and its maritime-oriented future national strategy will be the best option to maintain its national development and economic prosperity.