• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.596-608
• /
• 2018

As urban infrastructure is aging, the possibility of accidents due to the failures or breakdowns of infrastructure increases. Especially, aging underground infrastructures like sewer pipes, waterworks, and subway have a potential to cause an urban ground sink. Urban ground sink is defined just as a local and erratic collapse occurred by underground cavity due to soil erosion or soil loss, which is separated from a sinkhole in soluble bedrock such as limestone. The conventional measurements such as differential settlement gauge, inclinometer or earth pressure gauge have a shortcoming just to provide point measurements with short coverage. Therefore, these methods are not adequate for monitoring of an erratic subsidence caused by underground cavity due to soil erosion or soil loss which occurring at unspecified time and location. Therefore, an alternative technology is required to detect a change of underground physical condition in real time. In this study, the feasibility of a novel magnetic resonance based monitoring method is investigated through laboratory tests, where the changes of path loss (S21) were measured under various testing conditions: media including air, water, and soil, resonant frequency, impedance, and distances between transmitter (TX) and receiver (RX). Theoretically, the transfer characteristic of magnetic field is known to be independent of the density of the medium. However, the results of the test showed the meaningful differences in the path loss (S21) under the different conditions of medium. And it is found that the reflection coefficient showed the more distinct differences over the testing conditions than the path loss. In particular, input reflection coefficient (S11) is more distinguishable than output reflection coefficient (S22).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.585-590
• /
• 2019

The purpose of this study is to summarize the changes in virtual reality utilization in model houses through the time-by-year example of model houses and to study the use and future development of virtual reality technologies in model houses. As a result of compiling and analyzing characteristics of virtual reality utilization flow in model houses of apartments, it is as follows. First, the market for apartment model houses using virtual reality was gradually expanded for the purpose of brand promotion by private construction companies. Second, technologies that utilize virtual reality in apartment sales are changing from virtual space construction to virtual content implementation. Third, it is changing from the existing method of face-to-face and method of accessing actual promotional media to the form of publicizing apartments using virtual reality. Through this research, it is estimated that it will be used as an information medium and a form of experience using physical environment and virtual reality in a physical model house for consumers looking for model houses. This study presents the future direction of the model house, and develops it as a post-sale maintenance / management system through ICT technology (3D scanning, 3D modeling, virtual content) Further research on the technology is expected to be needed.

• Journal of Broadcast Engineering
• /
• v.26 no.5
• /
• pp.553-565
• /
• 2021

Point cloud is a set of points for representing a 3D object, and consists of geometric information, which is 3D coordinate information, and attribute information, which is information representing color, reflectance, and the like. In this way of expressing, it has a vast amount of data compared to 2D images. Therefore, a process of compressing the point cloud data in order to transmit the point cloud data or use it in various fields is required. Unlike color information corresponding to all 2D geometric information constituting a 2D image, a point cloud represents a point cloud including attribute information such as color in only a part of the 3D space. Therefore, separate processing of geometric information is also required. Based on these characteristics of point clouds, MPEG under ISO/IEC standardizes V-PCC, which imitates point cloud images and compresses them into 2D DCT-based 2D image compression codecs, as a compression method for high-density point cloud data. This has limitations in accurately representing 3D spatial information to proceed with compression by converting 3D point clouds to 2D, and difficulty in processing non-existent points when utilizing 3D DCT. Therefore, in this paper, we present 3D Discrete Cosine Transform-based Point Cloud Compression (3DCT PCC), a method to compress point cloud data, which is a 3D image by utilizing 3D DCT, and confirm the efficiency of 3D DCT compared to V-PCC based on 2D DCT.

• Journal of Wetlands Research
• /
• v.23 no.1
• /
• pp.94-105
• /
• 2021

Two vertical flow biofilters in series (BFS) employing synthetic fiber (FBF) followed by woodchip (WBF) was investigated in order to assess its potential as an alternative to the typical vertical-horizontal flow configuration in removing nonpoint source pollutants specifically nutrients and organics. These lab-scale column biofilters were operated for 176 days alongside three other columns that were added for control and sampling purposes. The biofilter columns were fed with either a semi-artificial piggery stormwater or artificial stormwater with specific ammonia and nitrate contents. Results reveal that the BFS was more effective than a single biofilter in removing pollutants especially nitrogen. FBF was found to remove up to 100% of ammonia from the stormwater with corresponding increase in nitrate in the outflow which shows evidence of active nitrification. Meanwhile, the succeeding vertical WBF was able to subsequently remove 77% of the nitrate. The effective reduction of nitrate in a vertical flow biofilter was believed to be due to the use of woodchip which can provide a carbon source that is required for denitrification. However, further investigation is needed to support this claim. Nonetheless, the study shows the potential of vertical flow BFS as a nitrogen removal mechanism especially in areas where enough land space for horizontal flow biofilters is limited.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.483-497
• /
• 2022

Recently, due to COVID-19, non-face-to-face online lectures are being held all over the world. In higher education in the post-corona era, distance learning has become the main teaching and learning method. At this time, Metaverse is being proposed as a new alternative. Metaverse has basic elements such as avatars, 3D space, and activities accompanied by interaction, which can be seen as a difference compared to existing VR (Virtual Reality) contents. This study designed and built an educational metaverse platform that can be applied to actual lectures by reflecting the three elements of the metaverse.In addition, we implemented a cross-device-platform that supports various devices such as HMDs, smartphones, tablets, and PCs by reflecting user requirements through usability tests such as middle school, high school, college students, and parents, so that anyone can easily participate in Metaverse lectures. Currently, the metaverse platform is being developed and serviced in various ways, but there are hardly any services designed for education. Just as services such as Zoom, the existing video conferencing solution, were used for non-face-to-face education, some functions of the currently serviced metaverse are utilized for education and used in the form of a one-time event. The educational metaverse platform developed through this study is expected to be a reference in constructing the metaverse for education in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.393-398
• /
• 2022

In order to experience and compete in car racing in reality, the barrier to entry is very high. It takes a lot of money and time to recruit or participate in a license, expensive vehicle, and stadium where the game can be played. Because of this problem, various equipment is used to create a feeling similar to real racing in their own space through sim racing equipment. Equipment similar to this reality is called sim racing equipment. The sim racing equipment can be divided into three categories. The first is a racing game device that can run virtual racing, the second is a steering wheel, seat, and cradle that are linked to the racing game device, and the third is a racing motion device that allows the body to experience the direction of movement in the racing game. In this thesis, the feeling of real car racing is based on game racing, and how similar reality to real racing is through the steering wheel and cradle equipment, which are equipment that can control game racing, and motion equipment that allows you to experience the direction of game racing. Let's check how the difference between real racing and data value changes through the G-Force direction and speed change values.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.319-328
• /
• 2022

The purpose of this study was to investigate the relationship between depression due to the COVID-19 pandemic and park use behaviors using on line posts. During the period of the pandemic prevention activities, text data containing both 'park' and 'depression' were collected from blogs and cafes in the search engine of Naver and Daum, then analyzed using Text Mining and Social Network techniques. As a result, the main usage behaviors of park users who mentioned depression were 'look', 'stroll(walk)' and 'eat'. Other types of behaviors were connected centering around 'look', one of the communication behaviors. Also, from CONCOR analysis, as the cluster referred from communication behavior and dynamic behavior was formed as a single behavior type, it was considered park users with depression perceived the park as the space for communication and physical activities. As the spread of COVID-19 caused the restriction of communication activities, the users might consider parks as one of the solutions. In addition, it was considered that passive usage behaviors have prevailed rather than active ones due to the depression. Resulting outcomes would be useful to plan helpful urban park for citizens. It is necessary to further analyze the park use behavior of users in relation to the period of before/after the COVID-19 pandemic and the existence/nonexistence of depression.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.1
• /
• pp.97-106
• /
• 2020

The mainstream of cinema animated film in today's world is the animated film produced by film companies such as Disney, DreamWorks, and 20th Century Fox. These animated films are influenced by Hollywood blockbusters, high cost, and big-budget, which have brought a gorgeous and splendid audio-visual feast to the global audience. DreamWorks Studios founded in 1994 has become noted in just over ten years. It has produced many high-quality animated works which are well-known all over the world. This achievement is no doubt inseparable from its superior external animation industry environment, and benefited from the American animation industry which commercially operated for almost 100 years. However, in addition to these external environmental factors, DreamWorks' achievements have also come from the extraordinary and superior creation of the animated film scripts, strong narrative script ensures the logic and appeal of animated films. This article takes Kung Fu Panda series, Shrek series, The Prince of Egypt, The Croods, Chicken Run, Megamind and other representative films produced by DreamWorks as key analysis object, using Jean Baudrillard's simulation and imaging theory, Syd Field's screenwriting skills, and Hegel's aesthetic point of view, explores the Creative Style of DreamWorks' Animated Film Script which contains the following four aspects. The script is exaggerated and novel, and the subject matter is rich and targeted. The script creation is very imaginative and can fully express the visual beauty. The structure of the story is well controlled, the space comes from reality but full of imagination. The characters have distinctive personality and the dialogue is moderated but forceful.

• Journal of Broadcast Engineering
• /
• v.26 no.6
• /
• pp.692-703
• /
• 2021

Recently, with the development of computer graphics technology, research on technology for expressing real objects as more realistic virtual graphics is being actively conducted. Point cloud is a technology that uses numerous points, including 2D spatial coordinates and color information, to represent 3D objects, and they require huge data storage and high-performance computing devices to provide various services. Video-based Point Cloud Compression (V-PCC) technology is currently being studied by the international standard organization MPEG, which is a projection based method that projects point cloud into 2D plane, and then compresses them using 2D video codecs. V-PCC technology compresses point cloud objects using 2D images such as Occupancy map, Geometry image, Attribute image, and other auxiliary information that includes the relationship between 2D plane and 3D space. When increasing the density of point cloud or expanding an object, 3D calculation is generally used, but there are limitations in that the calculation method is complicated, requires a lot of time, and it is difficult to determine the correct location of a new point. This paper proposes a method to generate additional points at more accurate locations with less computation by applying 2D interpolation to the image on which the point cloud is projected, in the V-PCC technology.

• Journal of the Korean Society for information Management
• /
• v.39 no.2
• /
• pp.87-110
• /
• 2022

This study was conducted based on the need to establish an operational plan following the establishment of the Okcheon-gun Daily Life Culture and Sports Center Library, and for the users of public libraries in Okcheon-gun, the functions and roles of the Okcheon-gun Library, collection related to operational direction, user service related activation, library usage related status survey, preference for the future use and perception of desired services were surveyed. Based on the results of the perception survey, the direction required by the Okcheon-gun residents for the Library was identified, and the research results are as follows. As a result of the study, first, when establishing a collection plan, the data types ought to be based on the printed materials and the multi-media materials to reflect the needs of the users, and it may also be necessary to collect them in consideration of the subject areas including literature, art, history, and technical sciences. Second, to provide various information services, it would be necessary to establish an overall information service plan, and it was identified that it would be necessary to develop various information services according to the user preferences and provide cooperative services. Third, it was determined that the programs appropriate for the various subjects and age groups should be continuously expanded moving forward in consideration of the larges demand for programs by the residents of Okcheon-gun. Fourth, new constructions and spatial improvements are needed, and the overall preference for open spaces was significant. In the case of cultural space, the preference for youth cultural facilities, convenience facilities for residents, infinite loss of imagination, and the (experiential) exhibition halls turned out to be large.