• Journal of Welding and Joining
• /
• 제14권5호
• /
• pp.49-58
• /
• 1996

In Korea Gas Corporation, as one of the pipeline repairing methods, damaged pipelines are sometimes treated with a temporally employment of split sleeve. On conducting the repair process, circumferential fillet and longitudinal groove welding usually must be included. For the case of groove welding, a considerable amount of R&D have been carried out related to property changes, while few study on the property change in fillet welding has been conducted. In this paper, so as to confirm the specification of fillet welding in terms of safety and reliability, properties changed by fillet welding were investigated for two welding processes. Qualifying tests such as reviewing macrostructure and nick-break tests were performed according to API 1104 and ASME section IX. In addition, tensile properties and hardness were evaluated according to KS B0841 and BS 4515. The fillet weld prepared by the qualified procedure showed melting depth of 0.8∼1.3mm and heat affected zone of 2.8∼3.4mm length. No crack and lack of penetration were observed. And the results of hardness and nick-break tests satisfied code requirements. The area crossed by fillet and groove welding line was found to have minimal tensile strength.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 박판성형기술의 진보
• /
• pp.99-118
• /
• 1994

In recent years reduction in noise and vibration in automobile has been strongly required not only from the standpoint of environmental regulations but also for raising the commercial value and ride comfort. Vibration damping steel sheets, which are composites made by sandwitching a visco-elastic resin layer between two steel sheets, have been developed as effective noise-abating materials and have found a growth of use in automobile industries. Vibration damping steel sheets for commercial use must be excellent in vibration damping property, press formability and spot weldability, but are inferior to ordinary steel sheets. In this study, the mechanical properties of vibration damping steel are evaluated, and press formability is analysed on the basis of those properties and shear bonding strength. The development of engine oil pan using damping steel sheets are also reported, focusing on serious problems in oil pan drawing.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.82-84
• /
• 2005

Among the advanced welding processes which are superior to conventional process, Electron beam welding and Narrow-gap TIG welding are most prospective in being applicable for the heavy industry field. With STS316LN, which is high strengthened austenitic stainless steel, the characteristic evaluation for these welding processes was carried out through the mechnical tests and property analyses. For the tensile strength EBW is better while in reverse for the yield strength. In Narrow-gap TIG the distribution of hardness values has some deviation according to the thickness direction while EBW has a tendency of a litter high hardness values in weld metal. After EB welding brings the reduction of nitrogen content, in TIG welding weld metal depends on the contents of welding material. Both processes have almost austenitic structure, but weld metal of EBW is also shown terrific structure

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.111-118
• /
• 1999

Ni(Fe)Al powders containing a homogeneous distribution of the in-situ formed AIN and $Al_2O_3$ dispersoids have been produced by mechanical alloying process in a controlled atmosphere using high energy attrition mill. The powders have been successfully consolidated by hot extrusion process. The phase information investigated by TEM and XRD analysis reveals that Fe can be soluble up to 20% to the NiAl phase ($\beta$) at room temperature after MA process. Subsequent thermomechanical treatment under specific condition has been tried to induce secondary recrystallization (SRx) to improve high temperature properties, however, the clear evidence of SRx was not obtained in this material. Mechanical properties in term of strength at room temperature as well as at high temperatures have been improved by the addition pf AIN, and the room temperature ductility has been shown to be improved after heat treatment, presumably due to the precipitation of second phase of $\alpha$ in this material.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.219-230
• /
• 2000

Plastic bonded explosive(PBX) is mainly composed of the nitramine explosives, RDX, HMX, and polymer binders. When the adhesion between nitramine crystals and binder is not particularly strong and can be failed under stress, dewetting occurs rather suddenly and this leads to a significant drop in tensile strength of explosives. Mechnical property of plastic bonded explosive depends on the surface characteristics of filler and binder. In order to design for better adhesion, an understanding of the surface properties of explosive and binder is essential. In this study, 2 kinds of RDX and 4 kinds of ethylene vinyl acetate copolymers are selected, since they are widely used in many plastic bonded explosives. The technical objective of this investigation is to calculate for the surface free energy of RDX and EVA using theory of Fowkes, van Oss, Neumann approaches and Kaelble equation and to predict the interaction between filler and binder from their surface free energies.

• 폴리머
• /
• 제29권4호
• /
• pp.375-379
• /
• 2005

생분해성 고분자인 poly(L-lactic acid) (PLLA)에 판상구조의 몬모릴로나이트(montmorillonite, MMT)를 첨가하여 필름형태의 나노복합재료를 제조하고, 무기나노입자의 첨가유무와 가수분해 전후의 열적 특성, 점탄성 특성, 모폴로지 등을 조사하였다. PLLA/MMT 나노복합재료의 XRD 분석결과와 TEM 사진으로부터 MMT 입자가 PLLA에 박리 및 분산되어 있음을 확인하였으며, 가수분해가 진행됨에 따라 U 결정 영역의 상대적인 양이 증가하므로 용융에너지 (${\Delta}H_m$가 더 필요함을 알 수 있었다. MMT를 첨가한 경우에 MMT가 강화제 역할을 하기 때문에 저장탄성률이 더 높은 값을 가졌는데, 이는 PLLA를 나노복합화하였을 때 인장강도, 충격강도 등의 기계적 물성이 증가한다는 이전의 연구와도 잘 일치하였다. 또한. 가수분해 전/후의 SEM사진으로부터, 표면에 스피노달(spinodal) 분해에 의한 거칠고 원형의 구멍들이 생겼음을 관찰할 수 있었으며, 가수분해가 진행됨에 따라 나노복합재료는 원형의 구멍들의 크기가 가수분해전보다 더 커졌을 뿐 원래의 형상을 유지하였다. 본 연구를 통하여 PLLA/MMT나노복합재료의 생분해 속도와 열적, 기계적 특성의 조절 가능성을 제시하였다.

• 한국주조공학회지
• /
• 제24권4호
• /
• pp.209-216
• /
• 2004

High silicon cast irons(HSCI) with the high acid resistance have been used for the prevention of acid corrosion occurring in various structures under acid conditions. However, the HSCI is only known as one of materials which have high acid resistance, but few work has dealt with this material in domestic. Therefore, in this study, the acid resistance of various cast irons with alloying elements and melting conditions have been examined, and studied the influences of the matrix structures, mechanical properties and morphologies of graphite. The results obtained in this study are as follows : In case of melting temperature, the mechanical properties of specimen manufactured with high temperature of $1650^{\circ}C$ showed higher value because the inclusion and impurity were removed. In case of pouring temperature, the mechanical properties of specimen fabricated below $1350^{\circ}C$ of pouring temperature showed higher value because the amount of gas absorption from atmosphere decreased during the solidification time. The corrosion rate decreased with increase in Si content. On the other hand, Mn addition appeared an opposite trend with Si.

• 산업기술연구
• /
• 제25권B호
• /
• pp.229-239
• /
• 2005

Dietary powder from Plantaginis ovatae testa was prepared by mechnical milling/grinding of the outer layer of the seed. The crystalline/surface structures of its powder (100 mesh) were examined, and several physical functionalities including, water capacity, oil holding capacity, emulsion/foam properties and physiological functionality such as in-vitro glucose and bile acid retarding effects were also investigated. Water holding capacity(WHC) of psyllium powder was $33.71{\pm}0.10g$ water retained/g solid at room temperature, whileas oil holding capacity(OHC) for soybean or rice bran oil were about 1.80g oil retained/g solid. These values of WHC and OHC were about 5.6 times higher and 2.8 times lower than those of commercial ${\alpha}$-cellulose, respectively. Changes of pH showed a small effect on WHC, but WHC increased with temperature. Emulsion capacity of 2%(w/v) psyllium was about 60% level of 0.5%(w/v) xanthan gum but emulsion stability after incubation of 24 hours showed about 1.4 times improvement of xanthan gum(0.5%,w/v). Also, psylliume(above 2%, w/v) alone had higher foam capacity than that of xanthan(1.1 times) and especially, 1 or 2% addition of psyllium improved the foam stability of protein solution(1% albumin+0.5% $CaCl_2$) by factor of 3.3 and 6.0 times, respectively. The glucose and bile acid retarding effects of psyllium powder were relatively very excellent suggesting the prevention from diabetes and arteriosclerosis. Especially, psyllium showed the 3.7 and 3.3 times higher effect on in-vitro glucose and bile acid retardation than those of commercial ${\alpha}$-cellulose, respectively.

• 한국항공우주학회지
• /
• 제44권9호
• /
• pp.769-774
• /
• 2016

장기간 태양광 복사환경에 노출되는 폴리머는 성능의 신뢰성을 확보하기 위해 장기간 환경시험을 필요로 한다. 본 논문에서는 MIL-STD-810을 따라 설계된 태양광 복사 시험기를 이용하여, 7, 14, 28, 56, 그리고 84 주기 동안 태양광 노화 시험을 하였다. 노화 시험 후에 RGB 값을 측정하고 CIE 1976 색공간을 이용하여, 각각의 RGB 감소율과 총 색 변화량을 계산하였다. 또한 만능재료시험기를 이용하여, ASTM-D638 시험 규격을 따라, 기계적 물성이 측정되었다. 결과적으로 태양광 노화 주기가 길어질수록, 총 색 변화량이 증가하였으며, 인장 강도, 연신율이 감소하였으나 탄성계수와 포아송 비는 변화가 적었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.189-196
• /
• 2020

초고층 건축물과 같은 대형 건축물의 부재가 대형화 되면 수화발열로 인하여 내 외부 온도차가 커져 균열이 발생한다. 잠열재인 상전이 물질을 수화열저감재로써 사용하는 방법은 다른 방법들보다 접근성, 사용성, 효율성이 높다. 이에 따라 수화열저감재로 상전이 물질을 사용한 연구들이 많이 진행되고 있다. 하지만 상전이 물질은 상전이 반응온도가 다르기 때문에 외기온도, 콘크리트 비빔온도 같은 환경요인에 영향을 받을 수 있는데 이를 고려한 연구는 미미한 수준이다. 따라서 본 논문에서는 서중환경에서 수화열저감재를 사용한 콘크리트의 수화발열 특성과 품질을 평가하였다. 그 결과, 서중환경에서 스트론튬계 수화열저감재를 3wt.%, 5wt.%를 혼입했을 경우, OPC수준보다 수화발열은 8%, 21% 저감이 가능하고 발열속도는 약 75분, 85분 정도 지연할 수 있는 것으로 나타났다. 이는 온도가 높을 때 상전이 반응이 상대적으로 촉진되어 실험실환경보다 향상된 성능 나타난 것으로 판단된다. 향후 서중환경에서 다른 종류의 수화열저감재 효율과 비교하고, 장기 재령에서의 강도발현 등에 대한 세부적인 검토를 진행할 예정이다.