• 열처리공학회지
• /
• 제35권1호
• /
• pp.20-26
• /
• 2022

This paper was designed to prevent intervertebral disc escape and treatment. we produced downsized lumbar traction bed at home and automated system depending on weight and muscle mass by using 3D print and Arduino to confirm the possibility of prototyping. Hence, we checked muscle mass 10 males in their 20s with different exercise conditions, and it shows that average muscle mass of group who exercised was 56.63kg, and non-exercise group was 50.8 kg. this is shows lumbar repetitive exercise can show the traction therapy effect can be seen traction therapy effect. In addition, we installed wooden doll substitute people with spring and test changing of length. Traction bed has the steps ranging from 1 to 4, in which the motor with torque and rpm, ranging from 4.7 to 5.5 kgf and from 4.5 to 5.3 rpm, respectively. The motor controlled with the voltage of Arduino was operated for the length of the spine to be stretched to 4-5 mm. As increasing the weight of the wooden doll by 10g, it was confirmed that the spring increased by 4-5 mm from the first step to the fourth step.

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.461-477
• /
• 2022

Dynamic Positioning (DP) is a system that uses computer-controlled thrusters, propellers, and other propulsion devices to automatically maintain a vessel's position and heading. In this study, a wind turbine installation vessel with DP capabilities was proposed for use in mild environmental conditions in the Yellow Sea. The thruster arrangements of the vessel were analyzed in relation to wind and current loads, and it was found that a four-corner arrangement of thrusters provided the best position-keeping performance. The vessel's DP control performance was also analyzed in relation to the increased environmental load caused by the presence of a wind turbine, using a capability plot. The vessel's performance was evaluated in three different states: floating with no load, during the loading of a wind turbine and suction buckets, and after the wind turbine has been installed. The use of 750 kW and 1,000 kW thrusters was also considered, and the environmental loads in the Saemangeum coastal area and the environmental load when a 5-Megawatt wind turbine is on board were assessed. The study concluded that at least four thrusters should be used for DP to safely manage the installation process of wind turbines.

• 센서학회지
• /
• 제32권4호
• /
• pp.207-212
• /
• 2023

H₂S is a toxic and harmful gas, even at concentrations as low as hundreds of parts per million; thus, developing an H₂S sensor with excellent performance in terms of high response, good selectivity, and fast response time is important. In this study, an H₂S sensor with a high response and fast response time, consisting of a sensing material (SnO₂), an electrode, a temperature sensor, and a micro-heater, was developed using micro-electro-mechanical system technology. The developed H₂S sensor with a micro-heater (circular type) has excellent H₂S detection performance at low H₂S concentrations (0-10 ppm), with quick response time (<16 s) and recovery time (<65 s). Therefore, we expect that the developed H₂S sensor will be considered a promising candidate for protecting workers and the general population and for responding to tightened regulations.

• ETRI Journal
• /
• 제27권1호
• /
• pp.102-105
• /
• 2005

In this letter, we present a layered structure of the Korean terrestrial Digital Multimedia Broadcasting (TDMB) transmission system for multimedia broadcasting service and introduce a device called the Ensemble Remultiplexer which is designed to remultiplex the Ensemble Transport Interface (ETI) for T-DMB service. This letter describes the remultiplexing process of the Ensemble Remultiplexer.

• Journal of information and communication convergence engineering
• /
• 제8권1호
• /
• pp.29-34
• /
• 2010

Wind speed and wind direction are usually taken using two parameters: wind speed and wind direction. This paper studies the average wind speed and direction calculation methods. The paper first introduces to basic wind's knowledge, and then presents several methods in calculating average wind speed and direction. Lastly some graphs are plotted base on these computational methods and the implementation of these methods in an actual buoy system.

• Journal of information and communication convergence engineering
• /
• 제8권3호
• /
• pp.301-306
• /
• 2010

This project is to study and design a meteorological buoy. It mainly covers and compares two approaches to design a meteorological buoy where their functions are same. The comparison will be made between mechanical structure, type of sensors, and electronics system design and power consumption issues.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.109-109
• /
• 2007

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.112-112
• /
• 2017

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 추계학술대회
• /
• pp.73-76
• /
• 2004

본 연구는 사출 성형에 있어서의 불량과 그에 따른 해결책을 Visual Basic을 이용하여 전산 정보화함으로써 성형 불량 대책을 제공, Gate와 Runner를 최적화하는 지적 결정 시스템을 개발하였다. 체계적인 기술이 정립되어 있지 않는 플라스틱 성형의 문제점을 최소화하고 재료비 절감, 설계 납기일 단축, 제품 품질 향상을 그 목적으로 하고 있다.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1165-1178
• /
• 2016