• 한국정밀공학회지
• /
• 제30권9호
• /
• pp.923-930
• /
• 2013

These days, the interests on the high speed handling robots are increasing because it is important to get down the unit cost of production to get the price competitiveness. The parallel kinematic mechanism is more suitable to implement the high speed robot system as well known. The moving parts of the high speed parallel robot have to be designed for light weight. But the vibration motion is induced by the light weight links because they drive in high acceleration and deceleration. In this reason, the structural analysis of the high speed parallel kinematic robot is very important in the design process. In this paper, the study on the structural analysis of a high speed parallel robot has been done and the research results will be introduced.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.186-193
• /
• 2014

This paper presents characteristic analysis of underwater bearing for canned type electric water pump. Characteristic analysis of underwater bearing was performed using self-developed performance tester, which capable of torque change, noise change, motor speed change and abrasion loss test with respect to temperature change of underwater bearing. The performance tester can be monitored in real time by designing the control unit using the Labview program. The performance experiment was performed through comparison of the silicon carbide (SIC) and the carbon bearing. From the experiment results, performance of SIC bearing was better than carbon bearing at the abrasion and temperature experiment.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.50-57
• /
• 2010

A high precision air bearing stage has been developed and calibrated. This linear-motor driven stage was designed to transport a glass or wafer with the X and Y following errors in nanometer regime. To achieve this level of precision, bar type mirrors were adopted for real time ${\Delta}X$ and ${\Delta}Y$ laser measurement and feedback control. With the laser wavelength variation and instability being kept minimized through strict environment control, the orthogonality of this type of control system becomes purely dependent upon the surface flatness, distortion, and assembly of the bar mirrors. Compensations for the bar mirror distortions and assembly have been performed using the self-calibration method. As a result, the orthogonality error of the stage was successfully decreased from $0.04^{\circ}$ to 2.48 arcsec.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.112-117
• /
• 2017

The arc, generated by Tungsten Inert Gas(TIG) welding, is stable and provides excellent quality of the weld. Since automation is difficult, a lot of work is performed by hand. In addition, to obtain the uniform weld quality is difficult when using a base metal having a nonuniform welding line, or when welding inside a pipe. Generally, TIG welding power has the characteristic of constant-current. The welding voltage is changed in proportion to the arc length. Hence, the automatic voltage control equipment should be applied at the TIG welding system. The automatic voltage control equipment has been designed using LabVIEW software. It consists of a manufactured voltage divider circuit, and jig for moving the torch. The voltage measurements and driving of the motor were performed through the algorithm implementation in LabVIEW. Welding was conducted while increasing the arc length. In this process, it was confirmed that the automatic voltage control equipment kept the arc length constant.

• 한국태양에너지학회 논문집
• /
• 제34권1호
• /
• pp.1-7
• /
• 2014

A study on the available power of a wind turbine to be used for wind farm control was performed in this study, To accurately estimate the available power it is important to obtain a suitable wind which represents the three dimensional wind that the wind turbine rotor faces and also used to calculate the power. For this, two different models, the equivalent wind and the wind speed estimator were constructed and used for dynamic simulation using matlab simulink. From the comparison of the simulation result with that from a commercial code based on multi-body dynamics, it was found that using the hub height wind to estimate available power from a turbine results in high frequency components in the power prediction which is, in reality, filtered out by the rotor inertia. It was also found that the wind speed estimator yielded less error than the equivalent wind when compared with the result from the commercial code.

• 한국지능시스템학회논문지
• /
• 제23권2호
• /
• pp.100-106
• /
• 2013

본 논문에서는 3개의 바퀴를 취하는 삼각형 구조의 전방향 청소로봇의 설계와 제어에 대해 소개한다. 시뮬레이션과 실험을 통해 제안하는 방법의 동작을 검증한다. 전방향 구조는 어느 방향으로 움직일 수 있다. 천장의 마커를 사용하는 StaGazer 센서를 사용하여 로봇의 위치와 헤딩각을 알아냈다. 추가로 초음파 센서를 부착하여 장애물을 검출할 수 있도록 하였다. 실험을 통해 시스템의 성능을 평가하였다.

• Smart Structures and Systems
• /
• 제12권5호
• /
• pp.547-577
• /
• 2013

To suppress vibration and noise of mechanical structures piezoelectric ceramics play an increasing role as effective, simple and light-weighted damping devices as they are suitable for sensing and actuating. Out of the various piezoelectric damping methods this paper compares mode based active control strategies to passive shunt damping for thin plates. Therefore, a new approach for the optimal placement of the piezoelectric sensors/actuators, or more general transducers, is proposed after intense theoretical investigations based on the Kirchhoff kinematical hypotheses of plates; in particular, modal and nilpotent transducers are discussed in detail. Based on the proposed distribution a discrete design for modal transducers is implemented, tested and verified on an experimental setup. For active control the modal sensors clearly identify the eigenmodes, whereas the modal actuators impose distributed eigenstrains in order to reduce the transverse plate vibrations. In contrast to the modal control, passive shunt damping works without requiring additional actuators or auxiliary power and can therefore act as an autonomous system, but it is less effective compensating the flexible vibrations. Exemplarily, an acryl glass plate disturbed by an arbitrary force initialized by a loudspeaker is investigated. Comparing the different methods their specific advantages are highlighted and a significant broadband reduction of the vibrations of up to -20dB is obtained.

• 재활복지공학회논문지
• /
• 제10권3호
• /
• pp.229-236
• /
• 2016

자기 센서와 액추에이터는 산업과 의료 분야에서 광범위하게 사용되고 있다. 센서와 액추에이터의 기반의 통합시스템은 기계 및 전자 기기들의 일반적인 조합으로써 메카트로닉스로 정의된다. 최근에 자기 무선 센서와 액추에이터가 개발되어지고, 다양한 분야에서 사용되고 있다. 특히 이 메커니즘은 자성 물질 및 물리적 현상에 관한 것으로 자기의 세기의 따라 달라진다. 그러나 이들 연구의 경계는 명확하지 않다. 따라서, 자기 마이크로 로봇, 자기액추에이터 및 센서들을 포함한 새롭고 정확한 정의가 필요하다. 본 연구에서는 의공학 및 재활을 위한 자기 메카트로닉스의 진보되고 확장된 개념을 혈관 재활을 위한 무선 펌프 시스템과 모션 감지 시스템을 중심으로 소개하고자 한다.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1534-1540
• /
• 2006

Concurrent Engineering (CE) is a popular method employed in product development. It treats the whole product design process by the consideration of product quality, cost, rate of progress, and demands of customers. The development of computer and network technologies provides a strong support to the realization of CE in practice. Aiming at the characteristics of CE and network collaborative design, this paper built network collaborative design system frame. Through the analysis of the network collaborative design modes based on CE, this paper provided a novel network collaborative design integration model. This model can integrate the product design information, design process, and knowledge. Intelligent collaboration was considered in the proposed model. The study showed that the proposed model considered main factors such as information, knowledge, and design process in collaborative design. It has potential application in CE fields.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.140-145
• /
• 2021

This paper deals with the development of a deep-learning-based runway cleaning robot using an optical camera. A suitable model to realize real-time object detection was investigated, and the differences between the selected YOLOv3 and other deep learning models were analyzed. In order to check whether the proposed system is applicable to the actual runway, an experiment was conducted by making a prototype of the robot and a runway model. As a result, it was confirmed that the robot was well developed because the detection rate of FOD (Foreign Object Debris) and cracks was high, and the collection of foreign substances was carried out smoothly.