• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.736-743
• /
• 2000

This paper represents our efforts to diagnose environmental stresses using physiological instruments in cucumber plants. The stresses could be detected by measuring and analyzing the difference of chlorophyll content, photosynthetic efficiency(Fv/Fm), differential temperature(DT), stomatal resistance and light absorbance values between treated and controlled plants. From the all over experiments, the stresses could be first diagnosed on the 1st to 5th day after treatment and the overall diagnosis rate was estimated at more than 50%.

• Journal of Biosystems Engineering
• /
• 제35권6호
• /
• pp.367-372
• /
• 2010

Consumption of pepper, a major spice vegetable used for seasoning Kimchi, continues to increase, but cultivation is in decline due to shortage of rural labor in Korea. The 39.2% of total labor requirement for conventional pepper cultivation was available for harvesting work. Therefore conventional manual harvesting should be turned to mechanical harvesting for labor-saving, cost-reducing and easy work. Surveys on conventional pepper cultivation patterns, labor requirements for various pepper cultivation works, and farmers' opinions on the mechanization of pepper harvesting were conducted to obtain basic informations. The labor requirement for pepper harvesting was 954 h/ha out of a total labor requirement of 2,436 h/ha for pepper cultivation. Harvesting was the hardest work, and hiring workmen for harvesting was also difficult. Farmers preferred to develop a small-scale pepper harvester using agricultural tractor or cultivar. Most farmer agreed to change cultivation pattern for mechanization of pepper harvesting, but hesitated to adopt new one-time-harvesting pepper varieties.

• Advances in aircraft and spacecraft science
• /
• 제7권3호
• /
• pp.215-228
• /
• 2020

As is shown in the paper, the Koltunov-Rzhanitsyn singular kernel of heredity (when constructing mathematical models of the dynamics problem of the hereditary theory of viscoelasticity) adequately describes real mechanical processes, best approximates experimental data for a long period of time. A mathematical model of the problem of the flutter of viscoelastic plates moving in a gas with a high supersonic velocity is given. Using the Bubnov-Galerkin method, discrete models of the problem of the flatter of viscoelastic plates flowed over by supersonic gas flow are obtained. A numerical method is developed to solve nonlinear integro-differential equations (IDE) for the problem of the hereditary theory of viscoelasticity with weakly singular kernels. A general computational algorithm and a system of application programs have been developed, which allow one to investigate the nonlinear dynamic problems of the hereditary theory of viscoelasticity with weakly singular kernels. On the basis of the proposed numerical method and algorithm, nonlinear problems of the flutter of viscoelastic plates flowed over in a gas flow at an arbitrary angle are investigated. In a wide range of changes in various parameters of the plate, the critical velocity of the flutter is determined. It is shown that the singularity parameter α affects not only the oscillations of viscoelastic systems, but the critical velocity of the flutter as well.

• Journal of Biosystems Engineering
• /
• 제21권3호
• /
• pp.357-371
• /
• 1996

An assessment of the field performance of machines for varied farming conditions may be essential to the development of mechanization program and rational machinery management. The field performance of machines is largely affected by the field capacity of machinery selected, physical size and shape of field plots and their scatterness, farming functions and conditions, and labor requirement and constraints. The study was to develop the mathematical model for the field performance of machines and time requirement of the rice farming systems, considering those factors which affect the field performance of machines. The mathematical models developed were simulated to determine field efficiency and capacity of the different sizes of major machinery for a various size of paddy field plot and for prevailing conditions of farming operations. The effects of the sises of machinery and the plot geometry on the efficiency and field capacity were compared for major rice farming functions.

• Agricultural and Biosystems Engineering
• /
• 제2권2호
• /
• pp.75-80
• /
• 2001

This paper describes method to diagnose abiotic stresses such ad low root temperature, low light intensity and high salinity in cucumber plants with several physiological instruments. The stresses could be detected by measuring and analyzing the differences in chlorophyll content, temperature difference between leaf and atmosphere and light absorptance at wavelengths of 480, 560, 710, 1420 and 1650nm. It was concluded that the stresses could be first diagnosed from the 3rd to 10th day after treatment and the overall accuracy of diagnosis was estimated between 25 and 75%. near-infrared spectrometer showed better and earlier detection than the other instruments investigated.

• 한국농공학회지
• /
• 제21권2호
• /
• pp.21-27
• /
• 1979

옛날에는 인력(人力)으로 수로(水路)를 만들었으나 기계(機械)의 발달(發達) 및 임금(賃金)의 상승(上昇)에 따라 기계화(機械化) 시공(施工)이 경제적(經濟的)으로 유리(有利)하게 되었으며 앞으로 이런 현상은 더욱 가속(加速)될 것이다. 수로(水路)의 기계시공(機械施工)은 굴착, 정리(整理), 포장(鋪裝)으로 나누어지며 굴착은 수로(水路)의 단면(斷面)을 대략적인 형태(形態)로 만드는 것이고 정리(整理)는 포장(鋪裝)을 할수 있게 .수로(水路)의 사면(斜面)과 바닥을 정확한 모양으로 다듬는 것이다. 정리(整理)의 정밀도(精密度)에 따라 포장용(鋪裝用) 재료(材料)의 양(量)이 크게 좌우(左右)된다. 자동정리기(自動整理機)는 종래의 것이 $20{\sim}40mm$의 표면(表面) 요철(凹凸)이 생기게 하나 현재(現在)는 ${\pm}6mm$의 정도(程度)까지 가능(可能)하다. 현재(現在)의 자동기계(自動機械)는 1인(人)의 운전원(運轉員)이 1일(日) $1,000{\sim}2,000m^3$까지 굴착 정리(整理)를 할수 있다. 콘크리트 포장(鋪裝)은 인력(人力)비빔으로 할때 1일(日) $2m^3/day$의 양(量)도 어렵고 로타리 믹서를 써도 $20m^3/day$ 정도(程度)이나 콘크리트 뱃치 푸랜트로 하면 $100{\sim}500m^3\day$가 가능하다. 그러나 대형(大型) 포장기(鋪裝機)를 사용(使用)하면 1일(日) 대형(大型) 수로(水路) $300{\sim}1,000m$를 포장(鋪裝)할수 있다. 수로(水路)의 기계시공(機械施工)은 콘크리트 포장(鋪裝) 두께를 균일(均一)하게 하므로써 콘크리트 비용(費用)을 최대(最大)로 절감(節減)하며 포장(鋪裝)의 품질(品質)을 좋게한다. 수로(水路)의 기계시공외(機械施工外)에도 많은 새로운 기계(機械)들이 사용(使用)되고 있으며 이러한 기계(機械)의 활용(活用)이 기술발전(技術發展)에 크게 기여하게 될 것이다.

• 전자공학회논문지SC
• /
• 제46권3호
• /
• pp.22-30
• /
• 2009

GPS 와 INS 통합시스템은 저가 MEMS 기술의 결과에 따라 대중적으로 널리 사용되기에 이르렀다. 그러나 저가센서에 의한 현재의 성과는 관성센서의 큰 에러 때문에 여전히 낮은 실정이다. 이것은 제한된 도시환경 안에서의 비행범위 때문에 더욱 관련이 있다. 이러한 관성센서 에러를 줄이면서 동시에 위성의 활용성을 높이기 위하여 GPS 와 저가 INS 는 연성으로 결합되어 Kalman Filter 설계를 응용하여 상호 통합되어진다. 본 논문에서는 연성으로 결합된 Kalman Filter를 이용한 GPS/INS 센서 통합을 제공한다. 우리는 또한 경로의 기하학에 의해 또는 그 목적시간 위치 따라 수학적으로 설명하는 ZH45C 궤도장치에 의한 산출된 기준 Wander Azimuth Strapdown Mechanization의 시뮬레이터 결과를 비교하여 검증하다.

• Journal of Biosystems Engineering
• /
• 제42권3호
• /
• pp.147-154
• /
• 2017

Purpose: To reduce the costs of potato seeds and labor of workers, a fully automatic in-situ seeding machine for cutting seed potatoes was developed. Methods: An experiment was conducted to evaluate the seeder performance of the prototype of potato planter by cutting seeds in farmlands from March to April 2017. The study tested the seeder performance at working speeds ranging from 0.28 to 0.45 m/s. The seeding rate and seeding distance were also investigated according to the planned distance between planted seeds from 20 to 30 cm, with 5 cm intervals. Results: Tests on the performance of the developed cutting blade on the automatic potato seeder show that whole potatoes should be used instead of half potatoes. The seeding rates were 88.8% and 82.5% for whole and half potatoes, respectively. When the tractor working speed was increased from 0.28 to 0.45 m/s, the successful seeding rate decreased from 98.8% to 96.3%, respectively. However, with planted seed distances of 20, 25, and 30 cm, the successful seeding rates were near 98%. Conclusions: The developed automatic potato seeder can to improve the labor productivity and cultivation environment of potato farms by the mechanization of the seeding process, which is currently associated with high-labor, -costs, and -hours. Therefore, based on this study, the developed automatic potato seeder provides the mechanization necessary for improved potato cultivation conditions in farmlands.

• 한국작물학회지
• /
• 제8권1호
• /
• pp.17-29
• /
• 1970

맥류의 기계화적응재배로서 드릴파와 점파를 품종과 비료수준을 달리하여 실행의 보통재배 및 광파재배와 비교시험한 결과를 요약하면 다음과 같다. 1. 대맥의 최적품종은 안전 다수 조숙인 당여이고, Barsoy는 내동성이 약하였다. 2. 소맥의 최적품종은 영광으로서 안전 다수 대립이나 성숙이 늦다. 원광은 도복이 심하였다. 3. 배비는 보통비보다 다수이고 도복이 약간 조장된 이외에는 재배적위험성도 없었다. 4. 내동 내도복성품종을 취택하면 배비조건에서도 드릴파나 점파가 안전하다. 5. 보통재배에 대한 증수율은 대맥에서는 20cm간격의 드릴파 16%, 광파 13%, 20${\times}$12cm의 점파가 12%였고, 소맥에서는 광파 9%, 20 ${\times}$ 13 cm의 점파 8%, 20cm 간격의 드릴파 7%였다. 6. 이들의 증수원인으로서는 수수의 증대가 가장 뚜렷하다. 7. 파종량의 증대는 드릴파 증수의 주인으로 되지 않은 것 같다. 8. 점파나 드릴파는 성숙을 다소 조장하는 경향이 있다. 9. 점파재배는 파종작업중의 필연적인 답압에 의하여 소맥에서 발아를 조장하는 효과가 있었다. 10. 드릴파나 점파에서는 좀더 밀식함으로서 더욱 증수할 여지가 있을 것 같다.

• 산업경영시스템학회지
• /
• 제6권8호
• /
• pp.55-61
• /
• 1983

In order to increase productivity, modern business which use the techniques of mass production should progress gradually from to use of human labor to total mechanization in the various steps of the production process. This will not only avoid the prospect of future labor shortages, but will also solve nancy of the problems involved in increasing productivity In this paper, we have approached the problem of determining the number of machine units that can be economically assigned to one operator by using Palm's model.