• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Journal of Chest Surgery
• /
• v.32 no.6
• /
• pp.525-531
• /
• 1999

Background: We analyzed five hundred patients who underwent either isolated or concomitant coronary artery bypass grafting(CABG) between November 1981 and June 1997. Material and Method: There were 330 males and 170 females with a mean age of 57.4$\pm$8.9 years. To evaluate the preoperative status, we performed electrocardiograghy, echocardiography, MIBI scan, Duplex sonogram, common blood test including CK and LDH and coronary angiography. Result: Preoperative clinical diagnoses were unstable angina in 282 (56.4%), stable angina in 141 (28.2%), postinfarction angina in 58 (11.6%), acute myocardial infarction in 8 (1.6%), variant angina in 7 (1.4%) and failed percutaneous transluminal coronary angioplasty in 4 (0.8%) patients. Preoperative angiographic diagnoses were three-vessel disease in 263 (52.6%), two-vessel disease in 93 (18.6%), one-vessel disease in 71 (14.2%), left main disease in 68 (13.6%), and others in 5 (1.0%) patients. Patients had various risk factors for coronary disease, and the frequency of the risk factors such as hypertension, diabetes and smoking showed increasing tendency year by year. We used saphenous vein grafts in 1143, internal thoracic artery grafts in 442, radial artery graft in 17, and gastroepiploic artery graft in 1 anastomosis. The mean number of grafts was 3.2$\pm$1.2 per patient. Concomitant operations were prosthetic valve replacement or valvuloplasty in 31, coronary endarterectomy and angioplasty in 27, left main coronary angioplasty in 13, carotid endarterectomy in 5, and neurologic problems, bleeding, and perioperative myocardial infarction. The mean follow-up period was 25$\pm$23 months and there were 5 cases of reoperation. Conclusion: We hope that the surgical results would improve with the accumulation of experience, application of new myocardial protection technique, and timely intervention of mechanical assisted devices.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.90-90
• /
• 2014

The Immersion Grating Infrared Spectrometer (IGRINS) is the first astronomical spectrograph that uses a silicon immersion grating as its dispersive element. IGRINS fully covers the H and K band atmospheric transmission windows in a single exposure. It is a compact high-resolution cross-dispersion spectrometer whose resolving power R is 40,000. An individual volume phase holographic grating serves as a secondary dispersing element for each of the H and K spectrograph arms. On the 2.7m Harlan J. Smith telescope at the McDonald Observatory, the slit size is $1^{{\prime}{\prime}}{\times}15^{{\prime}{\prime}}$. IGRINS has a plate scale of 0.27" pixel-1 on a $2048{\times}2048$ pixel Teledyne Scientific & Imaging HAWAII-2RG detector with a SIDECAR ASIC cryogenic controller. The instrument includes four subsystems; a calibration unit, an input relay optics module, a slit-viewing camera, and nearly identical H and K spectrograph modules. The use of a silicon immersion grating and a compact white pupil design allows the spectrograph collimated beam size to be 25mm, which permits the entire cryogenic system to be contained in a moderately sized ($0.96m{\times}0.6m{\times}0.38m$) rectangular Dewar. The fabrication and assembly of the optical and mechanical components were completed in 2013. From January to July of this year, we completed the system optical alignment and carried out commissioning observations on three runs to improve the efficiency of the instrument software and hardware. We describe the major design characteristics of the instrument including the system requirements and the technical strategy to meet them. We also present the instrumental performance test results derived from the commissioning runs at the McDonald Observatory.

• Pediatric Infection and Vaccine
• /
• v.27 no.2
• /
• pp.102-110
• /
• 2020

Purpose: This study aimed to investigate the clinical characteristics of human parechovirus (HPeV) infection in sepsis-like syndrome in infants aged under 3 months. Methods: Medical records of infants aged under 3 months with sepsis-like symptoms who were admitted between July 1, 2018 and August 31, 2018 were reviewed. A multiplex reverse transcription-polymerase chain reaction panel test was performed on the cerebrospinal fluid (CSF). Thirty-nine enrolled infants were categorized into three groups: 11 in group 1 (HPeV detected in the CSF), 13 in group 2 (enterovirus detected in the CSF), and 15 in group 3 (no virus detected in the CSF). Results: Compared with groups 2 and 3, a higher proportion of group 1 had tachycardia, tachypnea, apnea, and hypotension (P<0.05). A significantly lower white blood cell (WBC) count was noted in group 1 than in groups 2 and 3 (5,622±2,355/μL, 9,397±2,282/μL, and 12,312±7,452/μL, respectively; P=0.005). The CSF WBC count was lower in group 1 than in groups 2 and 3 (0.9±1.7/μL, 85.1±163.6/μL, and 3.7±6.9/μL, respectively; P=0.068). The proportion of patients requiring inotrope support (36.6% vs. 0% and 6.6%), mechanical ventilation (18.1% vs. 0% and 0%), and high flow nasal cannula (45.4% vs. 15.3% and 6.6%) was higher in group 1 than in groups 2 and 3. All patients recovered completely without complications. Conclusions: HPeV infection shows a severe clinical course and can cause a severe sepsis-like syndrome in infants aged under 3 months. Early diagnosis and proper treatment of HPeV infection are required.

• Pediatric Infection and Vaccine
• /
• v.5 no.2
• /
• pp.258-266
• /
• 1998

Purpose : Cases of adenoviral penumonia with rapidly progressive clinical course were experienced. We reviewed these patients in viewpoint of clinical manifestation and adenoviral serotypes. Methods : Culture and indirect immunofluorescence for respiratory viruses including respiratory syncytial virus, influenza virus, parainfluenza virus, adenovirus was done with nasopharyngeal aspirates from patients who admitted due to respiratory infections in Fatima Hospital, Masan from Nov. 1996 to Jul. 1997. Cultured adenovirus was serotyped by both neutralization and hemagglutination inhibition test. Medical records were reviewed for 5 patients with respiratory failure from adenovirus was isolated and serotyped. Results : The total number of examined patients was 460 patients. We isolated respiratory viruses in 143(30.9%) patients. Adenovirus was isolated from 66 out of 143(46.2%) patients. During Jan 1997 to May 1997, five patients with ages of 18 days to 11 months who were infected by adenovirus and had high fever with dyspnea and required assisted mechanical ventilation. One patients discharged against doctor's advice then died. Two of four patients had complications of disseminated intravascular coagulation; two had bronchiolitis obliterans. Two isolates were serotype 7, and one was serotype 5, and two were untyped. Conclusion : Severe pneumonia caused by serotype 7 continued to occur in 1997 following the epidemic in 1996, and severe pneumonia may also be caused by serotype 5 and other serotypes.

• Journal of Chest Surgery
• /
• v.42 no.5
• /
• pp.566-575
• /
• 2009

Background: The function of a bioprosthetic heart valve is determined largely by the material properties of the valve cusps. The uniaxial tensile test has been studied extensively. This type of testing, however, does not replicate the natural biaxial loading condition. The objective of the present study was to investigate the regional variability of the biaxial strain versus pressure relationship based on the types of fixation liquid models. Material and Method: Porcine aortic valves and pulmonary valves were assigned to three groups: the untreated fresh group, the fixed with glutaraldehyde (GA) group, and the glutaraldehyde with solvent (e.g., ethanol) group. For each group we measured the radial and circumferential stretch characteristics of the valve as a function of pressure change. Result: Radial direction elasticity of porcine aortic and pulmonary valves were better than circumferential direction elasticity in fresh, GA fixed and GA+solvent fixed groups (p=0.00). Radial and circumferential direction elasticity of pulmonary valves were better than aortic valves in GA fixed, and GA+solvent fixed groups (p=0.00). Radial and circumferential direction elasticity of aortic valves were decreased after GA and GA+solvent fixation(p=0.00), except for circumferential elasticity of GA+solvent fixed valves (p=0.785). The radial (p=0.137) and circumferential (p=0.785) direction of elasticity of aortic valves were not significantly different between GA fixed. and GA+solvent fixed groups. Radial (p=0.910) and circumferential (p=0.718) direction of elasticity of pulmonary valve also showed no significant difference between GA fixed and GA+solvent fixed groups. Conclusion: When fixing porcine valves with GA, adding a solvent does not cause a loss of mechanical properties, but, does not improve elasticity either. Radial direction elasticity of porcine aortic and pulmonary valves was better than circumferential direction elasticity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.6
• /
• pp.884-892
• /
• 2014

The purpose of this study was to investigate the drying characteristics and drying models of Ainsliaea acerifolia Sch. Bip. using far-infrared thin layer drying. Far-infrared thin layer drying test on Ainsliaea acerifolia Sch. Bip. was conducted at two air velocities of 0.6 and 0.8 m/sec, as well as three drying temperatures of 40, 45, and $50^{\circ}C$ respectively. The drying models were estimated using coefficient of determination and root mean square error. Drying characteristics were analyzed based on factors such as drying rate, leaf color changes, antioxidant activity, and contents of polyphenolics and flavonoids. The results revealed that increases in drying temperature and air velocity caused a reduction in drying time. The Thompson model was considered suitable for thin layer drying using far-infrared radiation for Ainsliaea accerifolia Sch. Bip. Greenness and yellowness values decreased and lightness values increased after far-infrared thin layer drying, and the color difference (${\Delta}E$) values at $40^{\circ}C$ were higher than those at $45^{\circ}C$ and $50^{\circ}C$. The antioxidant properties of Ainsliaea acerifolia Sch. Bip. decreased under all far-infrared thin layer drying conditions, and the highest polyphenolic content (37.9 mg/g), flavonoid content (22.7 mg/g), DPPH radical scavenging activity (32.5), and ABTS radical scavenging activity (31.1) were observed at a drying temperature of $40^{\circ}C$ with an air velocity of 0.8 m/sec.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.766-773
• /
• 2013

A transparent film was fabricated based on bacterial cellulose (BC), BC has excellent physical strength and stability at high temperature and it is an environmental friendly flexible material. In order to improve the conductivity, silver nanowire (AgNW) and/or graphene were introduced to the BC membrane. The aspect ratio of the AgNW synthesized in this study was 214, with a length of $15{\mu}m$ and width of 70 nm. The higher aspect ratio improved the conductivity by reducing the contact resistance. The thermal and electrical properties of 7 types of films prepared were investigated. Each film was fabricated with rectangular shape ($2mm{\times}2mm{\times}50{\mu}m$). The films were scored with a net shape by a knife, and filled with AgNW and graphene to bestow conductivity. The film filled with AgNW showed favorable electrical characteristics with a thickness of $350{\mu}m$, electron concentration of $1.53{\times}10^{19}$, electron mobility of $6.63{\times}10^5$, and resistivity of 0.28. The film filled with graphene had a thickness of $360{\mu}m$, electron concentration of $7.74{\times}10^{17}$, electron mobility of 0.17, and resistivity of 4.78. The transmittances at 550 nm were 98.1% and 80.9%, respectively. All the films were able to light LEDs bulbs although their brightness differed. A thermal stability test of the BC and PET films at $150{\pm}5^{\circ}C$ showed that the BC film was more stable, whereas the PET film was quickly banded. From these results, it was confirmed that there it is possible to fabricate new transparent conductivity films based on BC.

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2003

I. Purpose The multileaf collimator(MLC) has many advantages, but use of the MLC increased effective penumbra and isodose undulation in dose distribution compared with that of an alloy block. In this work, we introduced the HD-270 MLC, which can improve the above disadvantages of MLC, and reported its feasibility study. II. Method and Materials The HD-270 MLC is a technique which combines the use of the existing Siemens multileaf collimator(3D MLC) with patient translation perpendicular to the leaf plane. The technique produces a smoothed isodose distribution with the reduced isodose undulation and effective penumbra. To assess the efficacy of the HD-270 technique and determine the appropriate resolution, a polygonal shaped MLC field was made to produce field edge angles from 0 degree to 75 degree with a step of 15 degree. Each HD-270 group was generated according to the allowed resolution, i. e., 5, 3, and 2mm. The experiment was carried out on Primus, a Siemens linear accelerator configured with HD-270 MLC. The total 60 MU of 6 MV photon beam was delivered to X-Omat film(Kodak, USA) at a SAD of 100 cm and 1.5 cm depth in solid water phantom. Exposed films were scanned by Lumiscan75(LUMISYS) and analyzed using RIT113 software(Radiological Imaging Technology Inc., USA). To test the mechanical accuracy of table movement, the transverse, longitudinal, and vertical positions were controlled by a consol with ${\pm}5\;mm,\;{\pm}4\;mm,\;{\pm}3\;mm,\;and\;{\pm}2\;mm$ steps, and then measured using a dial gauge with an accuracy of 0.001 inch. During the experiments, the table loaded with about 50Kg human phantom to simulate the real treatment situation. III. Results The effective penumbra and isodose undulation became larger with increase the resolution and field edge angle. The accuracy of the table movement on each direction is good within the ${\pm}1\;mm$. IV. Conclusion Clinical use of the MLC can be increased by using of the HD-270 MLC which complements to the disadvantages of the MLC.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.427-433
• /
• 2001

The purpose of this study was to investigate the effect of chitosan on the shelf-life and quality of Paeksulkis(Korea rice cake). Paeksulgis containing 0-0.5% chitosan were stored at 5$^{\circ}C$ for 4 week and 2$0^{\circ}C$ for 1 week to test the effect of extenting shelf-life of Paeksulgis by chitosan. The pH of Paeksulkis was 5.65 without chitosan and pH of those were about 7.0(6.94-7.01) with 0.05-0.5% level of chitosan. Moisture content of Paekrukis wish or without chitosan was 38-40%. In Hunter’s color values of Paeksulkis of control, the lightness (L) was 84.28, redness(a) was -1.56 and yellowness(b) was 7.68. The lightness (L), redness(a) and yellowness(b) of Paeksulkis were increased by the increasing concentration of chitosan. In mechanical characteristics, cohesiveness concentration of Paeksulkis were the highest in control while obtained the highest score in color, after swallowing and overall quality (p<0.05). The score of flavor and consistency of Paeksulkis with different levels of chitosan wre not significant while the score of moisture in Paeksulkis with 0.05-0.5% level of chitosan was significantly higher than control (p<0.05). The score of flavor and consistency of Paeksulkis with different levels of chitosan were not significant while the score of moisture in Paeksulkis with 0.05-0.5% level of chitosan was significantly higher than control (p<0.05). Total bacterial counts (TBC) of Paeksulgis immediately before storage were 4.2$\times$10$^2$CFU/g in control and those containing 0.3-0.5% of chitosan were 0.5-1.0 log cycle lower than control. TBC of Paelsulgis containing chitosan was lower than increased for 2 weeks, reached at 1.8$\times$10$^{5}$ CFU/g and decreased for 2 weeks, reached at 1.8$\times$10$^4$CFU/g during storage at 5$^{\circ}C$. TBC of Paeksulkis with more than 0.3% of chitosan were 1.9 log cycles lower than that of control during storage at 5$^{\circ}C$. TBC of Paeksulkis with more than 0.3% of chitosan were 1.9 log cycles lower than that of control during storage at 5$^{\circ}C$ for 4 weeks. TBC of Paeksulgis increased to 10$^{8}$ CFU/g in control and 10$^{6}$-10$^{7}$ CFU/g in more than 0.3% chitosan during storage at 20$^{\circ}C$ for 1 week. The shelf-life of Paeksulkis was increased with increasing concentration of chitosan both temperature at 5$^{\circ}C$ and 20$^{\circ}C$.