• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.17-22
• /
• 2017

Mechanical property of tissue is closely related to diseases such as breast cancer, prostate cancer, cirrhosis of the liver, and atherosclerosis. Therefore measurement of tissue mechanical property is important for a better diagnosis. Ultrasound elastography has been developed as a diagnostic modality for a number of diseases that maps mechanical property of tissue. Optical coherence elastography (OCE) has a higher spatial resolution than ultrasound elastography. OCE, therefore, could be a great help for early diagnosis. In this study, we made tissue phantoms and measured their compressive moduli with a rheometer measuring the response to applied force. Uniaxial strain of the tissue phantom was also measured with OCE by using cross-correlation of speckles and compared with the results from the rheometer. In order to compare stiffness of tissue phantoms by OCE, the applied force should be measured in addition to the strain. We, however, did not use a load cell that directly measures the applied force for each sample. Instead, we utilized one silicone film (called as reference phantom) for all OCE measurements that indirectly indicated the amount of the applied force by deformation. Therefore, all measurements were based on displacement, which was natural and effective for image-based elastography such as OCE.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1692-1696
• /
• 2008

In this paper, we characterize the mechanical properties of PCL strand which is made by oscillating nozzle for tissue engineering scaffold. In order to increase the mechanical properties of the PCL strand, we designed an oscillating nozzle system for the 3D plotting system. First, we check the effect of the nozzle speed (3 to 8 mm/sec), frequency (0 or 300 Hz) and the oscillating amplitude (0 or 100 V) on the diameter of the PCL strand. Second, we observe the effect of the frequency (0, 100, 200 and 300 Hz) and the oscillating amplitude (0, 50 and 100 V) on the mechanical property of PCL strand. The mechanical properties and surface morphology of PCL strand made by oscillating nozzle are compared with the PCL strand made by normal nozzle using Nano-UTM and SEM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.657-658
• /
• 2010

• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.157-166
• /
• 2020

PURPOSE. The aim of this study was to evaluate the clinical performance and reliability of plasma sprayed nanostructured zirconia (NSZ) coating. MATERIALS AND METHODS. This study consisted of three areas of analysis: (1) Mechanical property: surface roughness of NSZ coating and bond strength between NSZ coating and titanium specimens were measured, and the microstructure of bonding interface was also observed by scanning election microscope (SEM). (2) Biocompatibility: hemolysis tests, cell proliferation tests, and rat subcutaneous implant test were conducted to evaluate the biocompatibility of NSZ coating. (3) Mechanical compatibility: fracture and artificial aging tests were performed to measure the mechanical compatibility of NSZ-coated titanium abutments. RESULTS. In the mechanical study, 400 ㎛ thick NSZ coatings had the highest bond strength (71.22 ± 1.02 MPa), and a compact transition layer could be observed. In addition, NSZ coating showed excellent biocompatibility in both hemolysis tests and cell proliferation tests. In subcutaneous implant test, NSZ-coated plates showed similar inflammation elimination and fibrous tissue formation processes with that of titanium specimens. Regarding fatigue tests, all NSZ-coated abutments survived in the five-year fatigue test and showed sufficient fracture strength (407.65-663.7 N) for incisor teeth. CONCLUSION. In this study, the plasmasprayed NSZ-coated titanium abutments presented sufficient fracture strength and biocompatibility, and it was demonstrated that plasma spray was a reliable method to prepare high-quality zirconia coating.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제18권2호
• /
• pp.77-105
• /
• 2014

Medical imaging techniques have evolved to expand our ability to visualize new contrast information of electrical, optical, and mechanical properties of tissues in the human body using noninvasive measurement methods. In particular, electrical tissue property imaging techniques have received considerable attention for the last few decades since electrical properties of biological tissues and organs change with their physiological functions and pathological states. We can express the electrical tissue properties as the frequency-dependent admittivity, which can be measured in a macroscopic scale by assessing the relation between the time-harmonic electric field and current density. The main issue is to reconstruct spectroscopic admittivity images from 10 Hz to 1 MHz, for example, with reasonably high spatial and temporal resolutions. It requires a solution of a nonlinear inverse problem involving Maxwell's equations. To solve the inverse problem with practical significance, we need deep knowledge on its mathematical formulation of underlying physical phenomena, implementation of image reconstruction algorithms, and practical limitations associated with the measurement sensitivity, specificity, noise, and data acquisition time. This paper discusses a number of issues in electrical tissue property imaging modalities and their future directions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.154-157
• /
• 2002

A cyto-indentation technique was used to obtain the biomechanical compressive compliance property of an chondrocyte cell attached to glass surface, which was tried to generate joint cartilage by tissue engineering. Piezo-transducer system and dual photo-diode system were used to conduct mechanical indentation through displacement-controlled testing and the measurement of corresponding cell reaction force. The Poisson's ratio of 0.37 was quoted from other report. The compressive compliance of chondrocyte, that was determined by elastic contact theory, was 1.38${\pm}$0.057 kPa. This value is 30% higher than that of MG63 osteoblast-like cell. The cyto-indentation technique employed in this study is so precise that it can quantify the biomechanical property of single cell.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제1권2호
• /
• pp.63-71
• /
• 2014

This study aimed to develop a novel bioactive hybrid xerogel consisting of silk fibroin /$SiO_2-CaO-P_2O_5$ by sol-gel process at room temperature. Scanning electron microscopy (SEM), FT-IR Spectroscopy, pore measurement, mechanical property testing, in vitro bioactivity test and cytotoxicity assay were performed to characterize the xerogel for bone tissue engineering application. We have found that the xerogel possessed excellent pore structures and mechanical property. Once immersed in a simulated fluid (SBF), the xerogel exhibited profound bioactivity by inducing hydroxyapatite layers on its surfaces. The cell toxicity study also demonstrated that there was little toxic to MC3T3-E1 cells. These results indicate that silk fibroin /$SiO_2-CaO-P_2O_5$ hybrid xerogel potentially could be used as a bone tissue engineering material.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권5호
• /
• pp.311-325
• /
• 2001

Tissue engineering scaffolds play a critical role in regulating the reconstructed human tissue development. Various types of scaffolds have been developed in recent years, including fibrous matrix and foam-like scaffolds. The design of scaffold materials has been investigated extensively. However, the design of physical structure of the scaffold, especially fibrous matrices, has not received much attention. This paper compares the different characteristics of fibrous and foam-like scaffolds, and reviews regulatory roles of important scaffold properties, including surface geometry, scaffold configuration, pore structure, mechanical property and bioactivity. Tissue regeneration, cell organization, proliferation and differentiation under different microstructures were evaluated. The importance of proper scaffold selection and design is further discussed with the examples of bone tissue engineering and stem cell tissue engineering. This review addresses the importance of scaffold microstructure and provides insights in designing appropriate scaffold structure for different applications of tissue engineering.

• 대한의용생체공학회:의공학회지
• /
• 제29권5호
• /
• pp.343-347
• /
• 2008

Thermal conductivity, thermal diffusivity were measured in the atrium of a swine heart. Radiofrequency (RF) catheter ablation in an atrium has rapidly emerged at the treatment of symptomatic reentrant arrhythmia associated with accessory pathway or Atrioventricular (AV) node conduction. The thermal properties of an atrium are definitely necessary for these treatments because, in thermal treatments, conductivity and diffusivity are significant factors in the relationship between the applied RF power and the resulting atrium temperature rise. Thermal properties were measured using a self-heated thermistor probe. Thermistor probes were inserted into the tissue of interest and were used to supply heat within the tissue as well as to monitor the temperature rise in the tissue. The measurements were performed at temperatures of 25, 37, $50^{\circ}C$. Atrium thermal conductivity ranged from 5.17$\pm$0.12 mW/cm$^{\circ}C$ at $25^{\circ}C$ to 5.33$\pm$0.08 mW/cm$^{\circ}C$ at $37^{\circ}C$. Atrium thermal diffusivity ranged from 0.00132$\pm$0.00007$cm^2$/sec at $25^{\circ}C$ to 0.00138$\pm$0.00003 $cm^2$/sec at $50^{\circ}C$. This paper also present the thermal property comparison of both chambers of a heart (ventricle and atria).

• 대한정형외과 초음파학회지
• /
• 제2권2호
• /
• pp.94-98
• /
• 2009

침술은 중국에서 3,000년 이상의 기원을 가진 가장 대중적인 보완대체의학 치료 방법으로 전세계적에서 널리 시행되고 있다. 초음파는 교육과 연구목적, 신경과 늑막과 같은 위험한 구조 주위 경혈에 침술을 시행할 때 도움이 된다. 또한 초음파는 조직에서 침 수기의 생 기계적 효과를 평가하는 데 이상적인 영상 검사로 조직 형태와 생 기계적 정보의 영상을 제공하는 특징적 장점을 가지고 있다. 탄성영상은 내부 혹은 외부에서 발생하는 기계적 자극에 의한 조직의 기계적 성질 혹은 반응을 정량화 할 수 있다. 그러므로 초음파와 탄성영상의 결합은 침술에 의한 인체 결합조직 구조의 동적변화를 정량적으로 평가할 수 있다.