• 한국분말재료학회지
• /
• 제23권2호
• /
• pp.170-176
• /
• 2016

Lithium-ion batteries (LIBs) are rapidly improving in capacity and life cycle characteristics to meet the requirements of a wide range of applications, such as portable electronics, electric vehicles, and micro- or nanoelectro-mechanical systems. Recently, atomic layer deposition (ALD), one of the vapor deposition methods, has been explored to expand the capability of LIBs by producing near-atomically flat and uniform coatings on the shell of nanostructured electrodes and membranes for conventional LIBs. In this paper, we introduce various ALD coatings on the anode, cathode, and separator materials to protect them and improve their electrochemical and thermomechanical stability. In addition, we discuss the effects of ALD coatings on the three-dimensional structuring and conduction layer through activation of electrochemical reactions and facilitation of fluent charge collection.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.17-18
• /
• 2021

In the present study, Al-Zn coating was deposited by Arc thermal (AT) and plasma arc thermal (PAT) spray processes, and their corrosion characteristics were studied in 3.5% NaCl through electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM) and mechanical tests. The bond adhesion result showed that plasma arc sprayed coating had a higher value attributed to compact, dense, and less porous coating compared to arc thermal spray coating which contains defects/pores and uneven morphology as revealed by scanning electron microscope analysis. Electrochemical results revealed that the plasma arc sprayed coating had a high polarization resistance at early stage of immersion, suggesting its excellent corrosion protection performance.

• 대한기계학회논문집B
• /
• 제29권4호
• /
• pp.477-484
• /
• 2005

Model fer the dynamic simulation of dynamic behaviors of a solid oxide fuel cell (SOFC) is provided. This model is based upon (1) coupled mass and heat transfer characteristics and (2) important chemical reactions such as electrochemical and reforming reactions in high temperature fuel cells such as SOFC. It is found that the thermal inertia of solid materials in SOFC plays an important role to the dynamic behavior of cell temperature. Dynamic characteristics of cell voltage, power, and chemical compositions with different levels of load change are investigated.

• 센서학회지
• /
• 제7권6호
• /
• pp.426-431
• /
• 1998

본 논문에서는 THAH/IPA/pyrazine 용액에서의 전기화학적 식각정지특성을 기술한다. THAH/IPA/pyrazine 용액에서의 n-형과 p-형의 Si에 대한 I-V 곡선이 얻어졌다. p-형 Si에 대한 OCP(개방회로전압)과 PP(보호막생성 전압)은 각각 -1.2 V와 0.1 V이고, n-형에 대해서는 -1.3 V와 -0.2 V로 각각 나타났다. p-형과 n-형 Si 모두 PP점보다 양의 전압에서 식각율이 급속히 감소하였다. 또한 THAH/IPA/pyrazine 용액에서의 식각정지특성을 관찰하였다. pn 접합부에서의 정확한 식각정지에 의해서 epi. 층의 두께에 상응하는 Si 다이어프램을 제작할 수 있었다. 최적 이방성 식각조건인 TMAH 25 wt.%/IPA 17 vol.%/pyrazine 0.1g/100ml에서 식각률이 가장 높기 때문에 식각소요시간이 크게 감소하였다.

• 전기화학회지
• /
• 제8권1호
• /
• pp.12-16
• /
• 2005

디젤은 높은 volumetric density$[VD,\;kg\;H_2/m^3]\;(>100)$와 gravimetric density$(GD,\;\%\;H_2)\;(>17)$를 가지는 우수한 수소저장매체 중의 하나이다. (Liquid Hydrogen의 경우 VD와 GD가 각각 50, 18 정도) 본 연구는 이러한 디젤연료의 개질에 적합한 촉매선정 및 반응특성에 관한 연구를 실시하였다 촉매는 자체 선정한 3가지 촉매(NECS-1, NECS-2, NECS-3)와 2가지 상용촉매(FCR-HCl4, FCR-HC35. Sud-Chemie, Inc)에 대하여 조사하였다. 실험결과 NECS-1이 디젤개질에 가장 적합한 것으로 판단되었다. 이와 함께 촉매 층의 길이에 따른 온도 및 농도를 분석하였으며, 디젤개질을 위한 연료의 delivery 문제로 인한 촉매 층 내의 급격한 온도 변화특성을 확인할 수 있었다. 또한 촉매 층 상단부에서 발생한 발열량을 하단부의 흡열부에 효과적으로 전달하는 것이 ATR(Autothermal Reforming) 반응 특성에 깊게 연관되어 있음을 확인할 수 있었다.

• 전기화학회지
• /
• 제12권2호
• /
• pp.162-166
• /
• 2009

탄소 피복된 Si/Cu 분말을 기계적인 볼-밀링(ball-milling) 방법과 고온에서 탄화수소가스 분해 방법에 의해 제조하여 리튬이차전지용 음극으로 사용하였고 이에 대한 전기화학적 거동을 조사하였다. 천연흑연(natural graphite)을 이용하여 탄소 피복된 Si/Cu/graphite 복합체 음극소재를 제조하였으며 천연흑연 음극소재와 전기화학적 특성을 비교하였다. 탄소 피복된 Si/Cu 음극의 가역적 비용량은 초기 10 싸이클까지 지속적인 증가를 나타냈다. 탄소 피복된 Si/Cu/graphite 복합체 음극의 가역적 비용량은 $0.25mA/cm^2$ 전류밀도에서 450mAh/g이고 초기 싸이클 효율은 81.3%로 나타났다. 복합체 음극의 싸이클 성능은 가역적인 비용량값을 제외하고 천연흑연 음극과 유사하게 나타났다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.31-35
• /
• 2001

The phase forming ability and formation enthalpies(${\Delta}H$) of Si-M(M = Ti, Cu, Ni, Zr) compound alloys were predicted by Miedema's model. The silicon compound alloys were synthesized by mechanical alloying and then characterized for the phase formation by X -ray diffraction. The electrochemical properties as the anode materials for lithium ion batteries were investigated using a galvanostatic method. It appears that the electrochemical characteristics of Si-M alloys can be predicted from the thermodynamic criteria for the phase formation using the Miedema's model.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1910-1918
• /
• 2005

Characterizing electrochemical polymerization of polypyrrole film on a substrate depends on many parameters. Among them, potential difference and cumulative charges play important role. The level of potential difference affects the quality of the polypyrrole. On the contrary, cumulative charge affects the thickness of the polypyrrole. The substrate surface is adjusted physically and chemically by treating with sandblasting and the addition of thiol for surface adhesion improvement. Experimental results show that the sandblasted and thiol treated substrate provides better. adhesion than non-sandblasted and non-thiol treated substrate.

• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.187-194
• /
• 2003

The production of hydrogen fuel depends basically on the water electrolysis. The study on the decrease of overpotential which activates the hydrogen production is the core to elevate the hydrogen production efficiency on principle. Characteristics on the overpotential decrease are observed through the micro reaction by ultrasonic in electrolytic cell. For the above, the electrochemical analyzer, i.e., BAS is applied, Experiments with ultrasonic forcing into 4 kinds of solution such as city water, city water plus nitrogen. distilled water, and distilled water plus nitrogen are carried out. And concentrations of KOH are 0%, 10%, 20% and 30%. The basic characteristics of the overpotential decrease are obtained through the analysis by LSV technique in sweep technique. In results, it is clarified that the ultrasonic influences the decrease of overpotential to obtain the efficiency elevation of hydrogen fuel production.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.105-111
• /
• 2015

Ultrasonic machining (USM) does not involve heating or any electrochemical effects, and subsequently causes low surface damage, has small residual stress, and does not rely on the conductivity of the workpiece. These characteristics are suitable for the machining of brittle materials, such as glass or ceramics. However, USM for brittle materials generates cracks on the workpiece while machining, especially at the hole exit with a small diameter. In this study, wax coating was used to deposit wax on the back side of the workpiece to decrease the occurrence of cracks at the exit holes in USM, and it was finally removed with a cleaning process. The experimental results show that this technique is beneficial for restricting the occurrence of cracks in glass or ceramics.