• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.813-819
• /
• 2014

The purpose of this study was to extract accurate parameters of facial movement features using 3-D motion capture system in speech recognition technology through lip-reading. Instead of using the features obtained through traditional camera image, the 3-D motion system was used to obtain quantitative data for actual facial movements, and to analyze 11 variables that exhibit particular patterns such as nose, lip, jaw and cheek movements in monosyllable vocalizations. Fourteen subjects, all in 20s of age, were asked to vocalize 11 types of Korean vowel monosyllables for three times with 36 reflective markers on their faces. The obtained facial movement data were then calculated into 11 parameters and presented as patterns for each monosyllable vocalization. The parameter patterns were performed through learning and recognizing process for each monosyllable with speech recognition algorithms with Hidden Markov Model (HMM) and Viterbi algorithm. The accuracy rate of 11 monosyllables recognition was 97.2%, which suggests the possibility of voice recognition of Korean language through quantitative facial movement analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1391-1398
• /
• 2011

Biomechanical analysis of arm motion during steering was performed using a motion analysis technique. Three-dimensional position data for each part of arm are fed into an interactive model combining a musculoskeletal arm model and the mechanical steering system to calculate joint angles and torques using inverse kinematic and dynamic analyses, respectively. The analysis shows that elbow pronation/supination, wrist flexion/extension, shoulder adduction/abduction, and shoulder flexion/extension have significant magnitudes. Sensitivity analysis of the arm joint motion with respect to seating posture and steering wheel configuration is carried out to investigate the qualitative influence of the seating posture and driver's seat configuration on the steering behavior.

• Journal of Biomedical Engineering Research
• /
• v.34 no.4
• /
• pp.212-217
• /
• 2013

Falling is one of the major public problems to the elderly, resulting in limitations of daily living activities. It can be induced by the functional loss of the balance ability and muscle strength in the elderly. It has been, however, not well investigated to suggest an effective methodology improving the balance ability and muscle strength for the prevention of the falling due to lack of information about the characteristics of the balance and muscle activations responded to the dynamic motions. The aim of the current study is, therefore, to identify the characteristics of the balance and muscle activations responded to the dynamic motions in Anterior-Posterior(AP) and Medial Lateral(ML) directions. For that, a motion capture system with eight infrared cameras, surface electromyogram system and Wii Fit system with a customized variable unstable base were used and kinematic and kinetic data obtained from the systems were analyzed for five healthy male($24.8{\pm}3.3years$, $177.4{\pm}2.0cm$, $73.9{\pm}12.9kg$, $23.5{\pm}4.0kg/m$). The results showed that the characteristics of the balance and muscle activations were differently responded to between the dynamic motions in Anterior-Posterior(AP) and Medial Lateral(ML) directions. These findings may indicate that customized dynamic motions should be applied to the training of the balance ability and muscle strength for the effective prevention of the falling. This study may be meaningful to providing basic information to establish a guideline improving effectively the balance ability and muscle strength.

• Advances in nano research
• /
• v.10 no.3
• /
• pp.235-251
• /
• 2021

In the current study, the free vibrational behavior of a Porous Micro (PM) beam which is integrated with Functionally Graded Piezoelectric (FGP) layers with initial curvature is considered based on the two trigonometric shear deformation theories namely SSDBT and Tan-SDBT. The structure's mechanical properties are varied through its thicknesses following the given functions. The curved microbeam is exposed to electro-mechanical preload and also is rested on a Pasternak type of elastic foundation. Hamilton's principle is used to extract the motion equations and the MCST is used to capture the size effect. Navier's solution method is selected as an analytical method to solve the motion equations for a simply supported ends case and by validating the results for a simpler state with previously published works, effects of different important parameters on the behavior of the structure are considered. It is found that although increasing the porosity reduces the natural frequency, but enhancing the volume fraction of CNTs increasing it. Also, by increasing the central angle of the curved beam the vibrations of the structure increases. Designing and manufacturing more efficient smart structures such as sensors and actuators are of the aims of this study.

• Journal of Biomedical Engineering Research
• /
• v.37 no.3
• /
• pp.105-111
• /
• 2016

Introduction: Surgical robot is the alternative instrument that substitutes the difficult and precise surgical operation; should have intuitiveness operationally to transfer natural motions. There are limitations of hand motion derived from contacting mechanical handle in the surgical robot master interface such as mechanical singularity, isotropy, coupling problems. In this paper, we will confirm and verify the feasibility of intuitive Non-restraint master interface which tracking the hand motion using infra-red camera and only 3 reflective markers without the hardware handle for the surgical robot master interface. Materials & methods: We configured S/W and H/W system; arranged 6 infra-red cameras and attached 3 reflective markers on hands for measuring 3 dimensional coordinate then we find the 7 motions of grasp, yaw, pitch, roll, px, py, pz. And we connected Virtual-Master to the slave surgical robot(Laparobot) and observed the feasibility. To verify the result of motion, we compare the result of Non-restraint master and that of clinometer (and protractor) through measuring 0~180 degree, 10degree interval, 1000 samples and recorded standard deviation stands for error rate of the value. Results: We confirmed that the average angle values of Non-restraint master interface is accurately corresponds to the result of clinometer (and protractor) and have low error rates during motion. Investigation & Conclusion: In this paper, we confirmed the feasibility and accuracy of 3D Non-restraint master interface that can offer the intuitive motion of non-contact hardware handle. As a result, we can expect the high intuitiveness, dexterousness of surgical robot.

• Steel and Composite Structures
• /
• v.36 no.2
• /
• pp.179-186
• /
• 2020

In this paper, the forced resonance vibration of porous functionally graded (FG) curved nanobeam is examined. In order to capture the hardening and softening mechanisms of nanostructure, the nonlocal strain gradient theory is employed to build the size-dependent model. Using the Timoshenko beam theory together with the Hamilton principle, the equations of motion for the curved nanobeam are derived. Then, Navier series are used in order to obtain the dynamical deflections of the porous FG curved nanobeam with simply-supported ends. It is found that the resonance position of the nanobeam is very sensitive to the nonlocal and strain gradient parameters, material variation, porosity coefficient, as well as geometrical conditions. The results indicate that the resonance position is postponed by increasing the strain gradient parameter, while the nonlocal parameter has the opposite effect on the results. Furthermore, increasing the opening angle or length-to-thickness ratio will result in resonance position moves to lower-load frequency.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.123-129
• /
• 2010

The purpose of study is to investigate the correlation between the Lyapunov exponent (LE) and the displacement of the center of gravity (DCG) for clarifying walking stability on the treadmill. From fifteen young healthy subjects volunteered, lower extremity joint angles were recorded using a three-dimensional motion capture system with reflective markers. The anteroposterior DCG and the LE were calculated by a commercial software. A linear correlation between LE and DCG (p<0.05) showed that LEs compensated for walking distance on the treadmill walking. However, LEs were found to be independent of self-selected walking speeds by a negligible correlation between LE and the Froude number (p>0.05).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.872-878
• /
• 2012

In this paper, an arm motion sensing system using potentiometer is developed. Most motion sensing systems use optical method for the quality of motion data. The optical method needs much cost for manufacturing capture system and takes much time for correcting the captured data. And mechanical method entails relativity low cost, but it uses the wires and takes much time for correcting the data like the optical method. For solving the problems, in this paper, an arm motion sensing system is newly developed using low cost potentiometer and based on the suggested simple calculation method for the joint angles and the angular velocities. For the verification of the performance of the developed system, practical experiments were executed using real human arm motion and a robot arm. The experimental results showed that the motion of the robot arm controlled by the output of the developed motion sensing system is much similar with the motion of human arm.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.10
• /
• pp.913-922
• /
• 2014

This paper describes design of a robotic above-knee prosthetic leg which is powered by electrical motors. As a special feature, the robotic prosthetic leg has enough D.O.F.s. For mimicking the human leg, the robotic prosthetic leg is composed of five joints. Three of them are called 'active joint' which is driven by electrical motors. They are placed at the knee-pitch-axis, the ankle-pitch-axis, and the an! kle-roll-axis. Every 'active joint' has enough torque capacity to overcome ground reaction forces for walking and is backlashless for accurate motion generation and high-performance balance control. Other two joints are called 'passive joint' which is activating by torsion spring. They are placed at the toe part and designed by Crank-rocker mechanism using kinematic design approach. In order to verify working performance of the robotic prosthetic leg, we designed a gait trajectory through motion capture technique and experimentally applied it to the robot.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1935-1936
• /
• 2006

인간과 의사소통 및 상호작용함에 있어 휴머노이드 로봇은 그 외형이 인간에게 친숙해야 할 뿐만 아니라 그 행동역시 인간과 유사해야 한다. 인간의 상체 동작과 유사한 동작은 인간과의 의사소통에 있어 매우 중요하다. 인간의 동작과 유사한 동작을 수학적인 식을 통하여 생성해 내기는 매우 힘들다. 수학적 모델을 개발하려는 노력과는 달리 최근에는 모션캡쳐 장비로부터 동작데이터를 획득하고, 그 데이터를 휴머노이드 로봇에 입력하는 연구가 진행되어왔다. 하지만, 로봇과 인간이 의사소통함에 있어서 필요한 모든 데이터를 모션캡쳐 장비로 획득하여 저장해 놓기는 불가능 하다. 또한, 동작을 통하여 의미를 전달하는 의사소통의 경우에 상대방과 분위기에 따라 동작의 방향이나 크기를 달리할 필요가 있다. 이 논문에서는 의미가 있는 동작을 모션캡쳐 장비로부터 획득하고, 휴머노이드 로봇에 맞게 변환한 다음, 그 데이터를 상황에 맞게 실시간으로 변형하는 방법을 제안한다. 제안한 방법을 몇가지 동작에 적용하여 그 실효성을 검정하였다.