• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.735-742
• /
• 2014

Self-piercing rivet(SPR)은 이종재료 접합을 위해 사용되는 결합용 기계요소로써, 대표적으로는 알루미늄 합금과 강판 등 용융점이 서로 다른 재료의 접합에 사용된다. SPR 접합은 일반 리벳접합과 달리 스스로 홀을 가공하며 삽입되기 때문에 사전의 홀 가공이 필요 없다.(1) 상부판재를 천공하고 하부판재와 함께 소성 변형되어 결합된다. 자동차의 차체 경량화를 위해서는 알루미늄 합금과 같은 경량소재가 사용되며, 부분적으로 스틸과 알루미늄 합금의 이종재료 접합이 요구된다. 그러나 알루미늄 합금과 강판은 용융점이 다르므로 기존의 차체 결합방법으로 이용되고 있는 저항 용접이 불가능하다. 이에 따라, 기계적 결합방법의 하나인 SPR 접합이 요구된다.(2) 따라서 본 연구에서는 강소성 유한요소해석 프로그램을 이용하여 리벳과 판재의 접합 성형성을 검토하고, 고장력 강판을 접합할 수 있는 새로운 형상의 SPR을 설계하였다. 또한 해석결과와 실험의 비교를 통하여 해석의 신뢰성을 검증하였다.

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.14-17
• /
• 2015

Cleaning effect is well known mechanism of oxide layer removal in DCEP polarity. It is also known that DCEN has higher heat input efficiency than DCEP in GTAW process. Based on these two renowned arc theories, conventional variable polarity arc for aluminum welding was set up to have minimum DCEP and maximum DCEN duty ratio to achieve the highest heat input efficiency and weldability increase. However, recent several variable polarity GTA research papers reported unexpected result of proportional relationship between DCEP duty ratio and heat input. The authors also observed the same result then suggested combination of tunneling effect and random walk of cathode spot to fill up the gap between experiment and conventional arc theory. In this research, suggested combinational work of tunneling effect and rapid cathode spot changing is applied to another unexpected phenomena of variable polarity aluminum arc welding. From previous research, it is reported that wider oxide removal range, narrower bead width and shallower penetration depth are observed in thin oxide layered aluminum compared to the case of thick oxide. This result was reported for the first time and it was hard to explain the reason at that time therefore the inference by the authors was hardly acceptable. However, the suggested combinational theory successfully explains the result of the previous report in logical way.

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.18-22
• /
• 2015

The importance of emotional quality of car is getting higher in these days. Noise takes great portion in emotional quality because it is detectable problem with just a few rides. The sources of car noise during operation are various and the related technical issues are vast. Sometimes weldments of auto body are referred as the source of noise and the suspicious weldment shows unsatisfactory welding quality in most cases. In this research, cases of noise making weldments are investigated to figure out the solution for welding quality improvement. They are categorized into several groups in according to the inferred types of the error source then appropriate solutions are suggested. Auto body has weldments of resistance spot welding and gas metal arc welding in general. Therefore the solutions are suggested as adjustment of welding process variables and related machineries. Inevitable error source is also referred which is originated from thermal expansion rate difference between ultra high strength steel and mild steel. This new approach is validated through simple calculation then more concrete investigation with numerical analysis is remained as further works to be done.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.73-73
• /
• 2009

In this sutdy, a new class ACA(Anisotropic Conductive Adhesive) with low-melting-point alloy(LMPA) and self-organized interconnection method were developed. This developed self-organized interconnection method are achieved by the flow, melting, coalescence and wetting characteristics of the LMPA fillers in ACA. In order to observe self-interconnection characteristic, the QFP($14{\times}14{\times}2.7mm$ size and 1mm lead pitch) was used. Thermal characteristic of the ACA and temperature-dependant viscosity characteristics of the polymer were observed by differential scanning calorimetry(DSC) and torsional parallel rheometer, respectively. A electrical and mechanical characteristics of QFP bonding were measured using multimeter and pull tester, respectively. Wetting and coalescence characteristics of LMPA filler particles and morphology of conduction path were observed by microfocus X-ray inspection systems and cross-sectional optical microscope. As a result, the developed self-organized interconnection method has a good electrical characteristic($2.41m{\Omega}$) and bonding strength(17.19N) by metallurgical interconnection of molten solder particles in ACA.

• International Journal of Korean Welding Society
• /
• 제1권2호
• /
• pp.12-17
• /
• 2001

With the advance of the robotic welding process, procedure optimization that selects the welding procedure and predicts bead width that will be deposited is increased. A major concern involving procedure optimization should define a welding procedure that can be shown to be the best with respect to some standard and chosen combination of process parameters, which give an acceptable balance between production rate and the scope of defects for a given situation. This paper presents a new algorithm to establish a mathematical model f3r predicting bead width through a neural network and multiple regression methods, to understand relationships between process parameters and bead width, and to predict process parameters on bead width for GMA welding process. Using a series of robotic arc welding, additional multi-pass butt welds were carried out in order to verify the performance of the neural network estimator and multiple regression methods as well as to select the most suitable model. The results show that not only the proposed models can predict the bead width with reasonable accuracy and guarantee the uniform weld quality, but also a neural network model could be better than the empirical models.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권6호
• /
• pp.802-807
• /
• 2012

SPR(Self-piercing rivet)은 판재 접합법으로서 스틸과 알루미늄 합금 등의 이종재료 접합에 사용되고 있다. 접합 공정은 피어싱을 포함한 소성변형이 함께 이루어진다. 프레스에서 펀치의 아래에 있는 리벳은 상부판재를 피어싱하고 하부 판재와 기계적으로 맞물리며 소성변형되어 결합된다. 본 논문에서는 SPR을 제작하기 위한 단조공정을 설계하였고, 이를 위하여 상용 유한요소해석 코드인 DEFORM-2D를 이용하여 해석하였다. 리벳 제작을 위한 단조공정의 설계에서 공정 순서, 성형성, 단조하중, 응력과 변형률 분포 등을 조사하였다. 또한 시뮬레이션 결과를 통하여 적합한 단조공정을 설계하였다. 설계된 공정은 업세팅, 헤드부 성형, 후방압출, 두 번째 챔퍼링의 네 단계로 구성된다. 그리고 단조공정에 대한 시뮬레이션 결과는 같은 조건을 적용한 실험 결과를 통하여 검증하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2008년도 춘계학술발표대회 개요집
• /
• pp.27-27
• /
• 2008

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.78-78
• /
• 2009

Glass sealing method is used glass bond as called frit in LCD, PDP process. but new sealing method is need to consider the endurance and economy. This paper present the new glass sealing method using high density gas torch in the furnace and process variable are defined by experiment. Taguchi Robust Experimental Design methods were applied for optimizing these four main processing parameters.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.235-238
• /
• 2009

To study the relationship between spark ignition and the gap in the nano-scale region, the electric potential was applied to between a Pt-Ir tip and a gold substrate. The tip was sharpened by electro-chemical etching process in the solution of $CaCl_2;H_2O$ and acetone. The radius of tip was measured to be around 200nm and attached to the scanning probe microscope to control the gap between the tip and the substrate. The electric potential of 10V to 80V was applied to initialize the spark. The gaps and the current profile were measured to analyze the characteristics of spark ignition. A spark sustaining time was measured to be between 50ns and 200ns depending on the applied electric potential and the gap between the electrodes. The continuous electric discharge was successfully sustained up to 1 second of spark or arc time. The developed process can be applicable to the micro-scale fabrication of automotive sensors as a similar concept of GTAW.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.150-151
• /
• 2005

High capacity container carrier has been considered for many decades to transport the more containers at the same time. Therefore, it is required for high capacity container ship to be applied thicker plate to accomodate a mumber of containers compared to that of general container ship. To increase productivity of welding, new welding process should be considered. A representive process for increase of weld productivity is EGW(Electrode Gas Welding) process. Both sides EGW process was evaluated for thicker-plate TMCP Steel. From the test result, it is considered that this process can be applied, showing satisfaction of mechanical properties such as tensile strength and impact property.