• 한국토양비료학회지
• /
• 제50권5호
• /
• pp.336-344
• /
• 2017

The soil water characteristics curve (SWCC) represents the relation between soil water potential and soil water content. The shape and range of SWCC according to the relation could vary depending on soil characteristics. The objective of the study was to estimate SWCC depending on soil types and layers and to analyze the trend among them. To accomplish this goal, the unsaturated three soils were considered: silty clay loam, loam, and sandy loam soils. Weighable lysimeters were used for exactly measuring soil water content and soil water potential. Two fitting models, van Genuchten and Campbell, were applied. Two models entirely fitted well the measured SWCC, indicating low RMSE and high $R^2$ values. However, the large difference between the measured and the estimated was found at the 30 cm layer of the silty clay loam soil, and the gap was wider as soil water potential increased. In addition, the non-linear decrease of soil water content according to the increase of soil water potential tended to be more distinct in the sandy loam soil and at the 10 cm layer than in the silty clay loam soil and at the lower layers. These might be seen due to the various factors such as not only pore size distribution, but also cracks by high clay content and plow pan layers by compaction. This study clearly showed difficulty in the estimation of SWCC by such kind of factors.

• 천문학논총
• /
• 제11권1호
• /
• pp.1-26
• /
• 1996

We have built a near-infrared imaging camera with a PtSi array detector manufactured by the Mitsubishi Company. The PtSi detector is sensitive in the wavelength range 1 to $5{\mu}m$. Quantum efficiency of PtSi is much lower than that of InSb and HgCdTe types. However, the PtSi array has advantages over the latter ones: (i)The read-out noise is very low; (ii)the characteristics of the array elements arc uniform and stable; (iii)it is not difficult to make a large PtSi array; and (iv) consequently the price is affordably low. The array used consists of $512{\times}512$ pixels and its size is $10.2\;mm{\times}13.3\;mm$. The filter wheel of the camera is equipped with J, H, K filters, and an aluminum plate for measuring the dark noise. The dewar is cooled with liquid nitrogen. We have adopted a method of installing the clock pattern and the observing softwares in the RAM, which Gill he easily used for other systems. We have developed a software with a pull-down menu for operating the camera and data acquisition. The camera has been tested by observing $\delta$ Orionis.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.16.1-16.1
• /
• 2009

We have fabricated solution processed oxide semiconductor active layer for thin film transistors (TFTs). The oxide semiconductor layers were prepared by ink-jet printing the sol-gel precursor solution based on doped-ZnO. Inorganic ZnO-based thin films have drawn significant attention as an active channel layer for TFTs applications alternative to conventional Si-based materials and organic semiconducting materials, due to their wide energy band gap, optical transparency, high mobility, and better stability. However, in spite of such excellent device performances, the fabrication methods of ZnO related oxide active layer involve high cost vacuum processes such as sputtering and pulsed laser deposition. Herein we introduced the ink-jet printing technology to prepare the active layers of oxide semiconductor. Stable sol-gel precursor solutions were obtained by controlling the composition of precursor as well as solvents and stabilizers, and their influences on electrical performance of the transistors were demonstrated by measuring electrical parameters such as off-current, on-current, mobility, and threshold voltage. Microstructure and thermal behavior of the doped ZnO films were investigated by SEM, XRD, and TG/DTA. Furthermore, we studied the influence of the ink-jet printing conditions such as substrate temperature and surface treatment on the microstructure of the ink-jet printed active layers and electrical performance. The mobility value of the device with optimized condition was about 0.1-1.0 $cm^2/Vs$ and the on/off current ratio was about $10^6$. Our investigations demonstrate the feasibility of the ink-jet printed oxide TFTs toward successful application to cost-effective and mass-producible displays.

• Journal of Preventive Medicine and Public Health
• /
• 제34권1호
• /
• pp.55-60
• /
• 2001

Objectives : The SERVQUAL scale is based on gap theory, which suggests the difference between consumers' expectations and the quality of the medical service actually received. However, problems in the implementation of the SERVQUAL scale have been identified by several researchers. Some researchers have proposed a simple performance-based measure (SERVPERF) or au exportation-controlled performance-based measure(Non-Diff) as alternatives to the SERVQUAL scale. On the basis of the theoretical concerns discussed, we examined the capability of each of the three scales(SERVQUAL, Non-Diff, SERVPERF) to explain variations in consumer satisfaction. Methods : Data was gathered from a self-administered questionnaire in a 430 bed hospital. Questionnaires evaluating medical services were distributed to 180 ambulatory patients. A total of 167 usable questionnaires were gathered. The questionnaire was composed of 10 expectation, performance and expectation-controlled performance items. In addition, overall satisfaction and purchase intention were measured. Results : Compared with the SERVQUAL scale, the Non-Diff and SERVPERF scales better explained the observed variations in consumer satisfaction(SERVOQUAL, $R^2=0.29;\;Non-Diff,\;R^2=0.51;\;SERVPERF,\;R^2=0.48$) and purchase intention(SERVQUAL, $R^2=0.22;\;Non-Diff,\;R^2=0.33;\;SERVPERF,\;R^2=0.34$). Conclusion : The maier conclusion from our study is that the Non-Diff and SERVPERF scales are more efficient in assessing consumer satisfaction than the SERVQUAL scale. Therefore we suggest that consumer satisfaction he measured by the Non-Diff or SEVPERF scales.

• 한국병원경영학회지
• /
• 제7권4호
• /
• pp.123-151
• /
• 2002

The objective of this study is to analyze the causal relationship of hospital inpatient's perceived quality, overall satisfaction, service value, and future intention to revisit. To carry out this objective, first we analyzed the dimensions of inpatient care service quality using SERVQUAL scale. The SERVQUAL scale is based on the gap theory, that is, the difference of patients' expectations and the actually received medical care service in hospital. On the basis of this theory, we measured the inpatient's perceived service quality and overall patient satisfaction. Data was gathered from a self-administered questionnaire at a 980 bed university hospital in Inchon City. These questionnaire measuring the service quality were distributed to 250 inpatients. The response rate was 66.4%. A total of 166 questionnaires was finally analyzed. To categorize medical service quality, the factor analysis was performed on 42 items. The reliability and validity of these items was evaluated. Finally to test 6 hypotheses, we analyzed the causal relationship of service quality, overall satisfaction, service value, and intention to revisit through the structural equation modeling(SEM). The major results of this study are as follows. First, the dimension of inpatient service quality was categorized into 7 dimensions, that is, personal caring, communication, access, physical environment, facilities and equipment, cleanliness, appropriateness and health status. Second, the reliability and validity of inpatient service quality items was satisfied. Third, as a result of structural equation modeling, the effect of inpatient's perceived service quality on overall satisfaction, service value, and intention to revisit was statistically significant. And total effect on intention to revisit as the core endogenous variable was perceived service quality(1.100), patient satisfaction(0.006), and service value(0.605).

• 한국병원경영학회지
• /
• 제9권4호
• /
• pp.45-69
• /
• 2004

The purpose of this study is to identify the nature of the inpatient service quality of national university hospital, and based on that, to examine the relationship of hospital inpatient's perceived quality, overall satisfaction, customer loyalty(intention of revisiting, intention of oral transmitting). To carry out these objectives, first we analyzed the dimensions of inpatient care service quality using SERVQUAL scale. The SERVQUAL scale is based on the gap theory, that is, the difference of patients' expectations and the actually received medical care service in hospital. On the basis of this theory, we measured the inpatient's perceived service quality, overall patient satisfaction and customer loyalty. Data were collected by self-administered questionnaires at a 809 bed national university hospital. These questionnaires measuring the service quality were distributed to 400 inpatients. The data samples are 347 cases in final. The response rate was 86.8%. Firstly, to categorize inpatient service quality in hospital, the factor analysis was performed on 48 items. The reliability and validity of these items was evaluated. Finally to explore the relationship of service quality, overall satisfaction, and customer loyalty, the multiple regression and logistic regression analysis are used. This study shows firstly, the dimension of inpatient service quality was categorized into 7 dimensions, that is, kindness, medical service, nurse caring, environment, facilities, appropriateness and access. Secondly, the reliability and validity of inpatient service quality items was satisfied. Thirdly, as a result of multiple regression analysis, the effect of inpatient's perceived service quality, especially, nurse caring(P<0.01), environment (P<0.01), facilities, appropriateness and access variables(P<0.05), on overall satisfaction was statistically significant. Lastly, in case of the effect on customer loyalty as a intension of oral transmitting, medical service(P<0.05), environment(P<0.01) and overall satisfaction(P<0.01) are statistically significant. Also, in case of intension of revisiting, medical service, environment, access, and overall satisfaction variables are significant factors. In conclusion, to maintain the satisfaction and customer loyalty on national university hospitals, the efforts to improve the inpatient service quality, especially, environment, medical service, and access factors might be needed.

• 대한수학교육학회지:학교수학
• /
• 제12권1호
• /
• pp.45-60
• /
• 2010

학교수학에서 '각도'는 용어로서의 실효성을 상실한 반면에, '각의 크기' 라는 표현이 우세한 만큼, 그 표현의 수용을 고려할 필요가 있다. 교과서에서 각의 크기는 변의 길이와 관계없이 두 변이 벌어진 정도에 따라 다르다는 것을 명시할 필요가 있다. 해설서의 내용과 교과서의 내용을 일치시켜야 한다. 교과서에서는 각의 크기를 측정하기 위한 임의단위를 취급하지 않는다. 임의단위에 의한 각의 크기의 측정을 생각할 수는 있지만, 그것이 그다지 행해지지 않는다는 실정을 받아들여, 해설서에서 그것을 요구하지 않는 것을 고려할 필요가 있다. 해설서에서 1직각의 표준단위로서의 역할을 명시할 필요가 있고, 교과서에서도 그것을 활용하는 장면을 제시해야 한다. 교과서에서는 삼각형의 세 각의 크기의 합을 구하는 과정과 사각형의 네 각의 크기의 합을 구하기 위해 삼각형과 사각형을 각각 잘라 붙이는 과정에서, 학생들이 크기가 180도인 각과 360도인 각이 그림으로 어떻게 표현될 수 있는지 알고 있다는 것을 전제로 하고 있다. 그것은 비약이다.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.732-743
• /
• 1995

The purpose of this study was to evaluate the adaptation of light cured dentin bonding agents to tooth structure by measuring contraction gaps on interfaces between cavity wall and composite resin under SEM study. In this study, class V cavities with cementum margin were prepared on the buccal surfaces of 15 extracted human premolar teeth and teeth were randomly assigned 3 groups of 5 teeth each. The cavities were filled with three dentin bonding agents and two composite resins were investigated for this study: three dentin bonding agents; Scotchbond 2, Scotchbond Multi-Purpose. All-Bond 2, two composite resins; Silux Pius, Z-100. Group 1 : Scotchbond 2 + Silux Plus Group 2 : Scotchbond Multi~Purpose + Z-100 Group 3 : All-Bond 2 + Z-100 The restored teeth were stored in 100% relative humidity at $37^{\circ}C$ for 7 days. And then, the roots of the teeth were removed with the tapered fissure bur and the remaining crowns were sectioned occlusogingivally through the center of restorations. Adaptation at tooth-restoration interface was assesed occlusally, gingivally, and axially by scanning electron microscope. The results were as follows : 1. In Group 1, the adaptation to dentinal wall of Scotchbond 2 was poor, but the adaptation to enamel wall of Scotchbond 2 was excellent. 2. In Group 2, the adaptation to occlusal was axial wall and gingival wall of Scotchbond Multi-Purpose was excellent. Especially in axially wall, the dentin bonding agents infiltrated into dentinal tubules and there was excellent adaptation to dentinal wall. 3. In Group 3, the adaptation to occlusal wall and axial wall of All-Bond 2 was excellent. But in gingival wall, there was gap formation between composite resin and dentin bonding agent.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.93-93
• /
• 2010

Semiconductor nanocrystal quantum dots (NQDs) have recently attracted considerable interest for use in photovoltaics. Band gaps of NQDs can be tuned over a considerable range by varying the particle size thereby allowing enhance absorption of solar spectrum. NQDs, synthesized using colloidal routes, are solution processable and promise for a large-area fabrication. Recent advancements in multiple-exciton generation in NQD solutions have afforded possible efficiency improvements. Various architectures have attempted to utilize the NQDs in photovoltaics, such as NQD-sensitized solar cell, NQD-bulk-heterojuction solar cell and etc. Here we have fabricated CdSe NQDs with the band gap of 1.8 eV to 2.1 eV on thin-layers of p-type organic crystallites (1.61 eV) to realize a donor-acceptor type heterojuction solar cell. Simple structure as it was, we could control the interface of electrode-p-layer, and n-p-layer and monitor the following efficiency changes. Specifically, surface molecules adsorbed on the NQDs were critical to enhance the carrier transfer among the n-layer where we could verify by measuring the photo-response from the NQD layers only. Further modifying the annealing temperature after the deposition of NQDs on p-layers allowed higher conversion efficiencies in the device.

• 한국표면공학회지
• /
• 제25권5호
• /
• pp.271-281
• /
• 1992

Amorphous hydrogenated silicon carbide(a-Si1-xCx : H) films have been prepared by the rf sputtering using a silicon target in a gas mixture of Argon and methane with varying methane gas flow rate(fCH) in the range of 1.5 to 3.5 sccm at constant Argon flow rate of 30sccm and rf power in the range of 3 to 6 W/$\textrm{cm}^2$. The effects of methane flow rate and rf power on the structure and optical properties of a-Si1-xCx : H films have been analysed by measuring both the IR absorption spectrum and the UV transmittance for the films. With increasing the methane flow rate, the optical band gap(Eg) of a-Si1-xCx : H films increases gradually from 1.6eV to the maximum value of 2.42eV at rf power of 4 W/$\textrm{cm}^2$, which is due to an increases in C/Si ratio in the films by an significant increase in the number of C-Hn bonds. As the rf power increases, the number of Si-C and Si-Hn bonds increases rapidly with simultaneous reduction in the number of C-Hn bonds, which is associated with an increase in both degree of methane decomposition and sputtering of silicon. The effects of rf power on the Eg of films are considerably influenced by the methane flow rate. At low methane flow rate, the Eg of films decreased from 2.3eV to 1.8eV with the rf power. On the other hand, at high methane flow rate, that of films increased slowly to 2.4eV.