• 대한가정학회지
• /
• 제39권12호
• /
• pp.205-224
• /
• 2001

This article presents the development of a self-report measure of Korean Marital Satisfaction Scale. Based on 'Family Process Model'and interviews with 183 married couple, 3 domain structures with 74 items were identified, which included interactional process, emotional process, and intellectual process. It was administerd to 289 couples to test reliability and validity. Overall reliability coefficients were high for each of the individual domains($\alpha$=.62 to $\alpha$=.93). Face validity, content validity, content validity and concurrent validity respectively were demonstrated good. Additionally, divergent validity with scales of self-esteem and depression was observed. These results support the reliability and psychometric validity of the Korean Marital Satisfaction Scale in the assessment of key dimensions of marital process of Korean couples.

• 천문학논총
• /
• 제24권1호
• /
• pp.35-41
• /
• 2009

We present a method to improve the RV (radial velocity) measurements accuracy by using telluric lines. Telluric lines are used to estimate the wavelength scale drift over the detector of the spectrograph. In the case of BOES, the Echelle spectrograph at BOAO (Bohyunsan Optical Astronomical Observatory), the wavelength scale drift can be several hundreds m/s over 24 hours. Due to the wavelength scale drift, the RV measurements accuracy of BOES is limited to several hundreds m/s. By estimating the wavelength scale drift by telluric lines, we can remove its effect to improve the RV measurements accuracy to about 40 m/s.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.424-428
• /
• 2005

This paper shows a non-contact optical method to inspect micron scale parts which will be manufactured in micro-factory system. This inspection system should have some characteristics like a small size, flexibility, and high measuring speed. In the viewpoint of measuring capabilities, it also has resolution under micron scale with measuring range over millimeter scale. Two methods will be presented in this paper, one is Moire and the other is white-light scanning interferometry. Also some experimental results will be presented to show the possibilities of the proposed inspection system.

• 한국식품조리과학회지
• /
• 제24권5호
• /
• pp.682-690
• /
• 2008

The principal objective of this study was to develop a standardized recipe for the large-scale production of Salbob and Ogokbob. The recipe was standardized as follows: we collected and recorded the amount of ingredients and production procedures currently being used by cooks in the contracted foodservice management company and hotel-based Korean restaurants. According to the food preferences of Koreans, we selected 2 kinds of rice; Salbob and Ogokbob. We developed a revised recipe and an evaluation form. We conducted a sensory evaluation with 30 panels, using a JAR (just-about-right) scale. We developed a standardized recipe for both kinds of rice. Yield, portion size, temperature, preparation time, equipment, cost, ingredients, weight of ingredients, method, and critical point were all components accounted for in the developed recipe. The factor method and the percentage method were proposed techniques for adjusting the recipe, and a direct measurement table for Salbob and Ogokbob was also devised.

• 한국소음진동공학회논문집
• /
• 제24권2호
• /
• pp.131-138
• /
• 2014

Vibration measurement of rotating shafts by installing sensors such as accelerometers or displacement sensors is costly and dangerous in some cases. As an alternative method, vibration measurement using camera images has been researched because sensor installation is not needed and displacement of a rotating shaft can be directly evaluated. This paper also suggests the enhanced technique applicable to the measurement of vibration of a large-scale rotating shaft. The concurrent methods based on camera images use marks, which are hardly applicable to rotating shafts. The proposed method measures vibration without any marks by evaluating shape errors. The working principle of the method is described and verified by a series of experiments.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (B)
• /
• pp.52-54
• /
• 2003

Measurement is used to improve software process and to help calculating software quality. It makes software project to be control and help producing software. Measuring software scale becomes important target in software development. LOC is used to measure the size intentioned aspect and function point is used to measure the function intentioned aspect. This paper discusses measurement method using function point, which fullows proposed rule, and degree of GUI (Graphical User Interface) accesses achieved by applying this measurement to web page. Applying proposed rules to web pages (specially that use much GUI such as shopping mall or auction site), there is advantage that calculate site changes on numerical value by measuring GUI degree when do site administration or update.

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.58-63
• /
• 1998

There are lots of factors that are related to the geometric characteristics of machined surface. Among them, the tool path and milling mode (up cut milling or down cut milling) are the easiest controllable machining conditions. Thus, the first objective of this research is to study the effects of them on the milled surface that is generated by an end milling tool. To get precision parts, not only the machining process but also the measurement of geometric tolerance is important. But, this measurement requires a lot of time, because the infinite surface points must be measured in the ideal case. So, the second objective is to propose a simple flatness measurement method that can be available instead of the 3-D geometric tolerance measurement method, using a scale factor and characterized points. Finally, it is also shown that the possibility of flatness improvement by shifting the consecutive fine cutting tool path as compared with the last rough cutting tool path.

• 항공우주기술
• /
• 제3권1호
• /
• pp.117-125
• /
• 2004

최근 중ㆍ대형 산업품에 대한 비접촉식 3차원 정밀 측정 장비가 개발되고 있다. 이러한 장비 중 하나인 데오드라이트 측정 시스템이 항공우주산업에 널리 활용되고 있다. 본 논문에서는 데오드라이트 시스템을 이용하여 근역장에서의 RF 프로브에 대한 위성체 탑재 안테나의 레인지 얼라인먼트 측정 방법을 기술하였다. Ku-band 및 Ka-band 안테나의 레인지 얼라인먼트 측정 및 조정을 측정 정확도 ±1 mm 및 ±$0.05^{circ}$도 이내에서 성공적으로 수행하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.71-74
• /
• 2003

Fall-of-potential method is used usually to measure the ground impedance of large scale grounding system exactly. Because the interlinked magnetic flux between closed loops to inject test current and to measure potential rise is existed in E-P-C straight line arrangement, mutual(or inductive) coupling influences greatly on the measurement correctness. Measurement errors produced from inductive coupling could be reduced by the arrangement methods of auxiliary electrodes. Right angle or P-E-C order arrangement methods were effective to reduce the inductive coupling and the decrease degree of measurement error was analysed as quantitative through an experiment.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.555-564
• /
• 2017

In this paper, a new technique for attitude and heading reference system (AHRS) using low-cost MEMS sensors of the gyroscope, accelerometer, and magnetometer is addressed particularly in vibration environments. The motion of MEMS sensors interact with the scale factor and cross-coupling errors to produce random errors by the harsh environment. A new adaptive attitude estimation algorithm based on the Kalman filter is developed to overcome these undesirable side effects by analyzing windowed measurement error covariance. The key idea is that performance degradation of accelerometers, for example, due to linear vibrations can be reduced by the proposed measurement error covariance analysis. The computed error covariance is utilized to the measurement covariance of Kalman filters adaptively. Finally, the proposed approach is verified by using numerical simulations and experiments in an acceleration phase and/or vibrating environments.