• 제어로봇시스템학회논문지
• /
• 제16권1호
• /
• pp.12-17
• /
• 2010

The oil tanker ship over 150GRT must equip oil content meter which satisfy requirements of revised MARPOL 73/78. Online measurement of oil content in complex samples is required to have fast response, continuous measurement, and satisfaction of ${\pm}10ppm$ or ${\pm}10%$ error in this field. The research of this paper is to develop oil content measurement system using analysis of light transmission and scattering among turbidity measurement methods. Light transmission and scattering are analytical methods commonly used in instrumentation for online turbidity measurement of oil in water. Gasoline is experimented as a sample and the oil content approximately ranged from 14ppm to 600ppm. TSK Fuzzy Model may be suitable to associate variously derived spectral signals with specific content of oil having various interfering factors. Proposed Parallel TSK Fuzzy Model is reasonably used to classify oil content in comparison with other models. Those measurement methods would be effectively applied and commercialized to oil content meter that is key components of oil discharge monitoring control equipment.

• 한국산업정보학회논문지
• /
• 제10권2호
• /
• pp.87-101
• /
• 2005

지난 10년 동안 SCM(Supply Chain Management)에 대한 많은 연구가 되어 왔으며, 그 중 성공적인 SCM 실행을 위한 파트너간의 협력과 성과요인에 대한 연구가 많았다. 그럼에도 불구하고 SCM의 특징상 그 범위가 광대하고 명확하지 않아 SCM 성공에 관한 포괄적인 연구에는 어려움이 있는 것이 사실이다. 본 연구에서는 기존에 부분적으로 이루어 졌던 선행연구를 토대로 SCM 성공을 구성하는 통합된 5가지 요소로 분류 및 정리하였다. 이를 통해 SCM 성공의 포괄적인 관점을 제공함으로써 SCM 성공을 위해 관리해야 할 영역과 지표를 명확히 하였다.

• Journal of Information Processing Systems
• /
• 제2권2호
• /
• pp.130-134
• /
• 2006

In the distributed replicating server model, the provision of replicated services will improve the performance of the providing service and efficiency for clients. Efficiently composing the server selection algorithm decreases the retrieval time for replicated data. In this paper, we define the system model that selects and connects the replicated server that provides an optimal service using the server-side downstream measurement and propose a server selection algorithm.

• 정보기술과데이타베이스저널
• /
• 제8권2호
• /
• pp.115-135
• /
• 2001

The objective of this paper is to develop a knowledge assets measurement model in Korea. There are relatively many researches on measuring knowledge assets of an organization. These previous researches, however, lack of comprehensive view of knowledge management and view of Korean organizational culture. We surveyed and analyzed previous researches, and found common factors to measure knowledge assets. We developed an updated version of knowledge assets index. The developed model has been validated for its fitness with real data of Korean companies. The result of this research can be used as a measurement tool for knowledge assets of public institutions as well as private companies.

• 한국국방경영분석학회지
• /
• 제24권1호
• /
• pp.58-67
• /
• 1998

This paper studies on physical strength measurement utilized for selecting military sportsmen. In order to estimate physical potential capability of a volunteer for a sportsmen, scores of physical strength factors are used and a regression model is developed. And then the results of this model and current physical strength measurement are compared. This paper shows that the model developed here is more effective than current measurement, since measurable physical strength factors are reduced and physical strength factors are quantified by comparing each other.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.73-80
• /
• 2001

The objective of this research is to develop a measurement error model for sculptured surface in On-Machine Measurement(OMM) process based on a closed-loop configuration. The geometric error model of each axis of a vertical CNC machining center is derived using a 4$\times$4 homogeneous transformation matrix. The ideal locations of a touch-type probe for the sculptured surface measurement are calculated from the parametric surface representation and X-, Y- directional geometric errors of the machine. Also the actual coordinates of the probe are calculated by considering the pre-travel variation of a probe and Z-directional geometric errors. Then, the step-by-sep measurement error analysis method is suggested based on a closed-loop configuration of the machining center including workpiece and probe errors. The simulation study shows the simplicity and effectiveness of the proposed error modeling strategy.

• 방사선산업학회지
• /
• 제17권4호
• /
• pp.471-479
• /
• 2023

In In-situ radioactivity measurement techniques, efficiency calibration models use predefined models to simulate a sample's geometry and radioactivity distribution. However, simplified efficiency calibration models lead to uncertainties in the efficiency curves, which in turn affect the radioactivity concentration results. This study aims to develop an efficiency calibration optimization methodology to improve the accuracy of in-situ gamma radiation measurements for byproducts from industrial facilities. To accomplish the objective, a drive mechanism for rotational measurement of an byproduct simulator and a sample was constructed. Using ISOCS, an efficiency calibration model of the designed object was generated. Then, the sensitivity analysis of the efficiency calibration model was performed, and the efficiency curve of the efficiency calibration model was optimized using the sensitivity analysis results. Finally, the radiation concentration of the simulated subject was estimated, compared, and evaluated with the designed certification value. For the sensitivity assessment of the influencing factors of the efficiency calibration model, the ISOCS Uncertainty Estimator was used for the horizontal and vertical size and density of the measured object. The standard deviation of the measurement efficiency as a function of the longitudinal size and density of the efficiency calibration model decreased with increasing energy region. When using the optimized efficiency calibration model, the measurement efficiency using IUE was improved compared to the measurement efficiency using ISOCS at the energy of ²²⁸Ac (911 keV) for the nuclide under analysis. Using the ISOCS efficiency calibration method, the difference between the measured radiation concentration and the design value for each simulated subject measurement direction was 4.1% (1% to 10%) on average. The difference between the estimated radioactivity concentration and the design value was 3.6% (1~8%) on average when using the ISOCS IUE efficiency calibration method, which was closer to the design value than the efficiency calibration method using ISOCS. In other words, the estimated radioactivity concentration using the optimized efficiency curve was similar to the designed radioactivity concentration. The results of this study can be utilized as the main basis for the development of regulatory technologies for the treatment and disposal of waste generated during the operation, maintenance, and facility replacement of domestic byproduct generation facilities.

• Journal of the Korean Statistical Society
• /
• 제29권3호
• /
• pp.319-336
• /
• 2000

A mixed model with a white noise process and an IMA(0,1,1) process is considered as a process model. It is assumed that the process is a white noise in the absence of a special cause and the process changes to an IMA(0,1,1) due to a special cause. One useful scheme in measuring the process level is to use the variable measurement interval (VMI) between measurement times according to the value of the previous chart statistic. The advantage of the VMI scheme is to measure the process level infrequently when in control to save the measurement cost and to measure frequently when out of control to save the off-target cost. This paper considers the VMI scheme in order to detect changes in the process model from a white noise to an IMA(0,1,1). The VMI scheme is shown to be effective compared to the standard fixed measurement interval (FMI) scheme in both statistical and economic contexts.

• 한국환경과학회지
• /
• 제7권6호
• /
• pp.793-801
• /
• 1998

In this study, the Dilution Method is used to measure river discharge through the hydraulic model test. the dilution method is divided into Constant-Rate-Infection Method and Slug-Injection Method in the river discharge measurement techniques. When the dilution method is applied in the hydraulic model flume, it is analyzed that the estimated error of constant-rate-injection method is less than that of the slug-in-jection method, and the result shows that floodflow analysis is more efficient than lowflow analysis as compared observed discharge with calculated discharge. The result of statistical error analysis shows that the constant-rate-injection method is appropriate technique for the measurement of the river discharge. Therefore, the dilution method among the river discharge measurement techniques can be applied for the river basin which can't be measured with current meter or unsteady-flow regime in the urban-small drainage or hydraulic structure equipment area and can be obtained more exact results than any other discharge measurement techniques.

• 대한안전경영과학회지
• /
• 제12권1호
• /
• pp.199-205
• /
• 2010

The research proposes the three-factor random measurement models for estimating the precision about operator, part, tool, and various measurement environments. The combined model with crossed and nested factors is developed to analyze the approximate F test by degrees of freedom given by Satterthwaite and point estimation of precisions from expected mean square. The model developed in this paper can be extended to the three useful models according to the type of nested designs. The study also provides the three-step procedures to evaluate the measurement precisions using three indexes such as SNR(Signal-To-Noise Ratio), R&R TR(Reproducibility&Repeatability-To-Total Precision Ratio), and PTR(Precision-To-Tolerance Ratio), The procedures include the identification of resolution, the improvement of R&R reduction, and the evaluation of precision effect.