• 한국위성정보통신학회논문지
• /
• 제10권4호
• /
• pp.83-86
• /
• 2015

본 논문에서는 수처리 시설용 광대역 통합망 연계 실시간 계측관리 시스템 UI 개발을 제안한다. 수처리시설용 광대역 통합망을 통해 서버로 수신된 센서 및 영상 데이터를 Web과 연동하기 위한 프로그램을 개발하며, 이와 별도로 독립적으로 운영이 가능한 UI를 개발한다. 전송된 센서 및 영상데이터를 원격 모니터링 하기 위한 웹 서버를 구축하며 센서 데이터, 영상 데이터를 Web기반의 UI를 통해 감시 및 제어가 가능하도록 개발하였다. 제안하는 수처리 시설용 광대역 통합망 연계형 실시간 계측관리 시스템을 통하여 센서를 통한 측정시간, 농도, 수심 계면 등의 현재 상태를 파악할 수 있으며 영상 모니터링을 통하여 실시간으로 수처리 시설의 정상적인 동작여부와 보안 및 화재 등의 인명피해 여부를 확인 할 수 있다. 뿐만 아니라 실시간 계측 관리 시스템을 실시간으로 모니터링 할 수 있는 UI 개발로 인해 실시간으로 정보를 한눈에 볼 수 있다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.361-377
• /
• 1998

The measurement of welding temperature of connector is usually performed with an infra red temperature gauge. However, the factors, which influence the temperature measurement, are rarely known. This research used the welding temperature measurement of the connector as an example, applying the experimental design, in two-phase experiments, to search the affecting factors. In phase-I experiment, we used a resolution III, seven-factor fractional factorial design with two levels for each factor. The result showed that none of the factor was significant in affecting the welding temperature when the type I error ${\alpha}$ was 0.05. Next, we did the phase-II factorial experiment with three factors and each factor had three levels. The experiment showed the experimental time was significant in affecting the temperature measurement when the type I error ${\alpha}$ was 0.05. Further Duncan's multiple range tests on the second experimental data showed that the later the experimental time, the weaker the light intensity could have on the temperature measurement and the average of the highest temperatures was lower. Moreover, the later the experimental time, the smaller was the variance of the temperature measurement and the difference between the averages of the highest and the lowest temperatures was also lower.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.677-694
• /
• 2018

Purpose: The purpose of this study is to investigate various prior studies on artificial intelligence and to examine the concept and characteristics of various prior studies of existing service quality. And this paper is to study the concept and characteristics of artificial intelligence services and propose suitable quality measurement items. Methods: The research method of this paper is to examine previous research related to existing artificial intelligence and to analyze characteristics related to service quality. Results: This paper examines the concept and characteristics of artificial intelligence service in a new era by examining previous studies related to artificial intelligence and derives quality measurement items. Conclusion: In the future, it is necessary to verify the validity of the quality measurement items of artificial intelligence service. Therefore, it is necessary to elicit and verify the main quality measurement items through the investigation of the expert group.

• 품질경영학회지
• /
• 제24권3호
• /
• pp.145-159
• /
• 1996

In today's organization, measurement plays a crucial role in helping improve process or quality. In this paper, we review the measurement error study, classical gauge repeatability and reproducibility study, and designed experiment suited for the determination of the measurement capability. Measurement error study is very simple to use but is rather crude. Hence, it should be used as a preliminary study to determine whether further study is necessary. Classical gauge repeatability and reproducibility (GR&R) study is the most common technique for evaluation of gauge capability. It calculates a percentage that relates the repeatability, reproducibility, and overall R&R to the specification range for the parameter measured. Hence, the individual repeatability and reproducibility statistics will indicate the area on which to concentrate. However, GR&R study only gives a point estimate of each component, which leaves a room for improvement. It is always good to integrate the use of control charts to ascertain the statistical stability of the measurement process. The tools of statistical experimental design are available for a comprehensive design and analysis of the measurement process. Hence, in this paper, we present gauge capability analysis as an experimental design problem and compare it with the classical GR&R study.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1328-1334
• /
• 2015

A new system for evaluating the voltage management errors of distribution equipment is presented in this paper. The main concept of the new system is to use real distribution live-line voltage to evaluate and correct the voltage measurement data from distribution equipment. This new approach is suitable for a new Distribution Management System (DMS) which has been developed for a distribution power system due to the connection of distributed generation growth. The data from distribution equipment that is installed at distribution lines must be accurate for the performance of the DMS. The proposed system is expected to provide a solution for voltage measurement accuracy assessment for the reliable and efficient operation of the DMS. An experimental study on actual distribution equipment verifies that this voltage measurement accuracy assessment system can assess and calibrate the voltage measurement data from distribution equipment installed at the distribution line.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.187-193
• /
• 2006

최근의 과학기술의 발전과 더불어 인공위성을 이용한 GPS 측량시스템의 실용화가 토목을 중심으로 한 건설현장에서도 두드러지고 있다. 특히 측량기준점을 확인하기 어려운 토목현장의 경우에는 GPS 측량의 유용성이 적극적으로 도입되어 실용화 단계에 이르렀다. 그러나 mm단위의 정밀성이 요구되는 건축현장의 경우에는 GPS가 가지는 오차의 크기로 인하여 적용되어 오지 못하다가 최근에 정밀도를 향상시킨 새로운 측량 기술이 개발되어 초고층 건물을 중심으로 적용되고 있다. 본 논문에서는 정확성과 편리성을 획기적으로 개선한 GPS 측량시스템을 세계초고층 건물인 버즈 두바이 현장에 적용한 사례를 소개하고자 한다.

• 센서학회지
• /
• 제26권4호
• /
• pp.280-285
• /
• 2017

This paper presents a respiration measurement sleeping pillow based on pressure sensors. The respiration measurement sleeping pillow system consists of a sleeping pillow, an interface circuit, a respiration measurement system, and four force-sensitive resistor(FSR) sensors attached at the bottom of the sleeping pillow. The FSR sensors are used to detect the respiration signals induced by the body movement while breathing. The respiration signals of a twenty health man were measured and analyzed by utilizing the respiration measurement sleeping pillow system. The pillow system could detect the respiration signals and had similar characteristics to the chest type BIOPAC respiration sensor used by medical doctors. The respiration rates of ten subjects were also measured. The average measurement accuracy was about 98.8%. The research results showed that this pillow system can be used to detect and analyze the respiration signal when sleeping for the better sleep management.

• 정보관리학회지
• /
• 제28권1호
• /
• pp.309-326
• /
• 2011

기존 메타데이터의 품질 측정 방법은 오류가 발생한 레코드를 단순히 계수하여 그 비율로 품질을 측정하였다. 이러한 한계를 극복하기 위해 메타데이터 요소별로 상대적 중요 정도를 나타내는 가중치를 적용함으로서, 메타데이터 품질을 체계적으로 계량화 하는 측정 방법을 제시하고자 하였다. 구체적인 가중치 부여 방법으로 엔트로피, 이용자 과업, 그리고 이용 통계를 활용하였다. 또한 이들을 결합하여 통합 가중치를 제시하고 실제 서비스 되고 있는 학술지 기사 메타데이터에 적용하였다. 실험 결과, 엔트로피 가중치 방법은 데이터 자체의 특성을 잘 반영하며, 이용자 과업을 적용한 방법은 이용자의 정보요구를 해결하는 필요한 메타데이터 요소를 제시하며, 통합 가중치는 특정 메타데이터 요소의 오류에 영향을 받지 않으면서 균형 잡힌 측정값을 제시하여 계량화 방법에 적합한 것으로 나타났다.

• 웰빙융합연구
• /
• 제4권3호
• /
• pp.23-33
• /
• 2021

Purpose: In the course of the domestic environmental impact assessment, the current status survey was improperly conducted, and the issue of false and inaccurate environmental impact assessment reports has been raised several times recently through media reports. Research design, data and methodology: There is a continuous demand for improvement measures for the current status measurement method, such as having difficulties in securing a normal measurement date in consideration of equipment operation and rainfall days in the field. Results: In addition, in order to grasp the general air quality status of the evaluation target area, it is necessary to check the various current status concentrations by season and time series per year. However, there is a problem that is currently being carried out based on limited results such as measurement for 1 day or 3 days. Conclusions: Therefore, in this study, based on the national atmospheric measurement network, an inverse distance weighted (IDW) interpolation method was applied to calculate the current state concentration. This study suggested a method to use it in preparing the air quality item in the environmental impact assessment report.

• 품질경영학회지
• /
• 제51권4호
• /
• pp.633-642
• /
• 2023

Purpose: The variation of the internal diameters of gun barrel incurs a lot of reworks in gun barrel manufacturing process and the significant quality problem of gun barrel. And it is likely to stem from the current measurement system for the internal diameter of gun barrel and the related manufacturing process as well. The purpose of this study is to improve the gun barrel manufacturing process through improving measurement system. Methods: The improved measurement system using laser can measure the internal diameters of gun barrel more accurately, and the properly adjusted honing process reduces the variation of internal diameters of gun barrel. Results: Comparing the mean square error of internal diameters for 6 gun barrels measured before and after process improvement shows that the variation of gun barrel internal diameters was significantly reduced after the process improvement. Conclusion: The introduction of improved measurement system for the internal diameters of gun barrel and the adjustment of related honing process results in the reduction of reworks of gun barrels and their internal diameter variations.