• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1990년도 제12회 학술강연회초록집
• /
• pp.58-62
• /
• 1990

The size and concentration of wear debris in lubricating oil often reveal the operating condition of the rotating machinery. To evaluate the possible application of light attenuation measurement for the estimation of wear debris concentration in the lubricating oil, the light transmittance through the lubricating oil cell contaminated with various concentrations of diatomite particles was measured, the attenuation coefficient was estimated from the transmittance measurement and the coefficients were compared with those obtained from the scattering theory. The comparision showed good agreements between them. It is also noted that the experimentally determined attenuation coefficient showed almost linear relation with particle weight concentrations for the concentrations within the range of 2000 ppm. For the case of 0 ppm weight concentration of diatomite particles in the lubricating oil cell, the thickness of the cell required to give $100 \mu W$ light attenuation is 7.75 mm. This result indicates that the light attenuation method will be one of the possible candidates of machine failure diagnostic sensors for the estimation of wear debris concentration in the lubricating oil.

• Tribology and Lubricants
• /
• 제6권2호
• /
• pp.94-98
• /
• 1990

The size and concentration of wear debris in lubricating oil often reveal the operating condition of the rotating machinery. To evaluate the possible application of light attenuation measurement for the estimation of wear debris concentration in the lubricating oil, the light transmittance through the lubricating oil cell contaminated with various concentrations of diatomire particles was measured, the attenuation coefficient was estimated from the transmittance measurement and the coefficients were compared with those obtained from the scattering theory. The comparision showed good agreements between them. It is also noted that the experimentally determined attenuation coefficient showed almost linear relation with particle weight coucentrations for the concentrations within the range of 2000 ppm. For the case of 0 ppm weight concentration of diatomire particles in the lubricating oil cell, the thickness of the cell required to give $100 \muW$ light attenuation is 7.75 mm. This result indicates that the light attenuation method will be one of the possible candidates of machine failure diagnostic sensors for the estimation of wear debris concentration in the lubricating oil.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.718-721
• /
• 2005

The purpose of the study is to evaluate the usage of microtremor in estimation of subsurface structure and ground response to ground motion. Ground motion amplification based on site condition of an area is an important parameter for dynamic design. Microtremor cover the characteristics in a low frequency range, while forced vibrations cover them in a high-frequency range. Microtremor consider ground characteristics and offer transfer function in area. To determine the dominant frequency, the passive microtremor measurement is performed and to determine the transfer function of test site, active microtremor measurement is performed. Microtremor measurement in the site is compared with theoretical transfer function calculated from the known structures.

• 설비공학논문집
• /
• 제24권6호
• /
• pp.538-544
• /
• 2012

Analysis of thermal performance is required for the economic operation of turbine cycle of power plant. We developed corrective model of main feed water flow which is the most important parameter for the precise analysis of turbine cycle performance. Classification model for the identification of feed water flow measurement status was applied to increase the suitability of the corrective model. We used neural network and support vector machine to develop estimation model of main feed water flow with more generalization capability. The estimation model can be used practically to evaluate corrective performance of turbine cycle plant.

• 한국의류학회지
• /
• 제37권1호
• /
• pp.39-50
• /
• 2013

This study estimates the measurements required to make garments but omitted from Size Korea 2010. Before the estimation of the measurements, the differences of the measurement methods were reviewed through previous research related to clothing construction and various measurement protocols that include previous Size Korea 2010 projects and ISO. The research target was 308 females aged 20 to 30 who lived in Seoul and the surrounding Gyeonggi province. A total of 43 measurements were obtained by the direct measurement method and analyzed in this study. In addition, 17 measurements which differ from the measurement method were also measured directly. These 17 measurements items were waist height, waist back height, waist height natural indentation, body rise, rise length, waist back length 1 & 2, posterior shoulder length 1 & 2, arm length 1 & 2, upper arm circumference 1 & 2, elbow circumference 1 & 2, and waist circumference 1 & 2. To analyze the differences in measurements, the subjects were divided into 2 age groups (20's and 30's). The results were as follows: First, there were big differences in stature, waist height, shoulder length, total length, and neck shoulder point to breast points by age groups; however, there were no differences in 17 measurement (such as shoulder angles) by age groups. Second, it was determined that 'waist circumference 1 & 2', 'waist back length 1 & 2', 'arm length 1 & 2', 'elbow circumference 1 & 2', 'upper arm circumference 1 & 2' and 'body rise & rise length' had significant differences by measurement methods in the entire group as well as each age group. Third, the values of 8 measurements omitted from Size Korea 2010 were estimated using similar measurements. The results of the correlation analysis were utilized to select reasonable independent measurements. Finally, 10 regression equations were obtained by regression analysis; subsequently, these will be useful for estimation of omitted measurements in Size Korea 2010.

• 대한건축학회논문집:구조계
• /
• 제34권10호
• /
• pp.19-26
• /
• 2018

The purpose of this study was to analyze characteristics and to develop estimation model of IHG(Internal Heat Gain) from appliance in domestic apartment units. To do this, it was defined the source of IHG from appliance and the calculation method through the case study of international and domestic codes. And the equipment related datum such possession, usage or not, etc were collected through field survey in apartment units, and the appliances' electricity consumption were measured separately from overall electricity consumption. Annual electricity consumption value were calculated with field survey datum and appliances' electricity consumption measurement datum, and then IHG value was calculated by applying PHPP v9 method. And it was conducted correlation analysis between IHG value and the area for exclusive use, the number of occupants, and then the IHG from applianace estimation model was deducted with regression analysis. Finally, it was analyzed the present level and of the domestic code(The Building Energy Efficiency Rating System) comparing with the value of estimation model, and the various international codes(HERS, Building America, SAP).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.595-597
• /
• 2004

In this paper range measurement systems using ultrasonic and visual sensors are designed. By varying the focus of a camera, the range to a target pattern is computed. Pour different methods are tested for the focusing-based range measurement. The best result is obtained when counting edge pixels found by Laplacian operator. Higher accuracy can be obtained by fusing the measurement of camera focusing with that of ultrasonic sensor. The system designed is experimented within the range of 300-450mm.

• 한국정보통신학회논문지
• /
• 제13권12호
• /
• pp.2719-2730
• /
• 2009

본 논문에서는 EDGE (Enhanced Data Rates for GSM Evolution) 단말의 성능을 측정하기 위한 측정 알고리즘을 소프트웨어로 구현하고 EDGE 신호 발생기를 통해 발생된 신호를 이용해 구현된 소프트웨어 측정 알고리즘의 성능을 평가해본다. 일반적으로 통신신호 측정기는 매우 정밀한 정확도를 필요로 하므로 정확도가 충분히 높지 않은 일반 통신모뎀 수준의 수신 알고리즘을 직접적으로 측정기에 적용할 수는 없다. 본 논문에서는 EDGE 신호의 정밀한 측정을 위한 새로운 EDGE 신호의 수신 알고리즘을 제안한다. 제안된 EDGE 수신 알고리즘에는 2단계(개략적 단계, 미세 단계)의 파라미터(심볼타이밍, 주파수오프셋, 반송파위상) 추정방식을 사용하였다. 또한 수신신호의 보간을 이용하여 수신 신호 샘플의 개수를 증가시킴으로서 측정의 정확도를 향상시켰다. 본 논문에서 제안된 EDGE 신호 측정방식은 하드웨어를 구현하기 전에 소프트웨어를 이용하여 사전에 측정 성능을 검증하는데 사용될수 있다. 또한 구현된 소프트웨어 알고리즘을 속도측면에서 최적화함으로서 직접 EDGE 신호 측정을 위한 상용 시스템으로도 이용할 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권1호
• /
• pp.242-259
• /
• 2015

Three-dimensional video coding is one of the main challenges restricting the widespread applications of 3D video and free viewpoint video. In this paper, a novel fractal coding algorithm with motion-vector-field-based motion estimation for depth map sequence is proposed. We firstly add pre-search restriction to rule the improper domain blocks out of the matching search process so that the number of blocks involved in the search process can be restricted to a smaller size. Some improvements for motion estimation including initial search point prediction, threshold transition condition and early termination condition are made based on the feature of fractal coding. The motion-vector-field-based adaptive hexagon search algorithm on the basis of center-biased distribution characteristics of depth motion vector is proposed to accelerate the search. Experimental results show that the proposed algorithm can reach optimum levels of quality and save the coding time. The PSNR of synthesized view is increased by 0.56 dB with 36.97% bit rate decrease on average compared with H.264 Full Search. And the depth encoding time is saved by up to 66.47%. Moreover, the proposed fractal depth map sequence codec outperforms the recent alternative codecs by improving the H.264/AVC, especially in much bitrate saving and encoding time reduction.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.919-926
• /
• 2012

In order to control a LTI(Linear Time Invariant) system subjected to system noise and measurement noise, first of all, it is necessary to estimate the state of system with reliability. Kalman filtering technique has been widely used to estimate the state of the stochastic LTI system with stationary noise characteristics because of its estimation ability versus algorithm simplicity. However, it often fails to estimate the state of the LTI system of which system parameter uncertainty exists partly and/or input uncertainty exists. In this paper, a new estimation technique based on Kalman filter is suggested for stochastic LTI system under parameter uncertainty and/or input uncertainty. A fuzzy estimation algorithm against uncertainties is introduced so as to compensate the state estimate filtered by Kalman filter. In order to verify the state estimation performance of the suggested technique, several simulations are accomplished.