Abstract
In this paper, we implement the measurement functionality for performance measurements of EDGE (Enhanced Data Rates for GSM Evolution) terminal by using software. Generally speaking, the receiving algorithms in normal MODEM cannot be used directly to a measurement system due to the lack of accuracy. Therefore, we propose a new receiver algorithm for precise EDGE signal measurements. In the proposed algorithm, 2-stage (coarse stage, fine stage) parameters estimation (symbol-timing, frequency offset, carrier phase) scheme is used. To improve the estimation accuracy, we increase the number of the received signal samples by interpolation. The proposed EDGE signal measurement algorithm can be used for verifying the hardware measurement system, and also can be used for the commercial systems through software optimization.
본 논문에서는 EDGE (Enhanced Data Rates for GSM Evolution) 단말의 성능을 측정하기 위한 측정 알고리즘을 소프트웨어로 구현하고 EDGE 신호 발생기를 통해 발생된 신호를 이용해 구현된 소프트웨어 측정 알고리즘의 성능을 평가해본다. 일반적으로 통신신호 측정기는 매우 정밀한 정확도를 필요로 하므로 정확도가 충분히 높지 않은 일반 통신모뎀 수준의 수신 알고리즘을 직접적으로 측정기에 적용할 수는 없다. 본 논문에서는 EDGE 신호의 정밀한 측정을 위한 새로운 EDGE 신호의 수신 알고리즘을 제안한다. 제안된 EDGE 수신 알고리즘에는 2단계(개략적 단계, 미세 단계)의 파라미터(심볼타이밍, 주파수오프셋, 반송파위상) 추정방식을 사용하였다. 또한 수신신호의 보간을 이용하여 수신 신호 샘플의 개수를 증가시킴으로서 측정의 정확도를 향상시켰다. 본 논문에서 제안된 EDGE 신호 측정방식은 하드웨어를 구현하기 전에 소프트웨어를 이용하여 사전에 측정 성능을 검증하는데 사용될수 있다. 또한 구현된 소프트웨어 알고리즘을 속도측면에서 최적화함으로서 직접 EDGE 신호 측정을 위한 상용 시스템으로도 이용할 수 있다.