• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.306-312
• /
• 2005

In these days, the people living in the urban suffer from the environmental noise because the number of cars increases in the city, and a lot of new industrial complex is made in the urban every year. But there is no suitable system for measurement and management of environmental noise. Therefore, in this research, a new system for the measurement and characteristic analysis, evaluation, management of environmental noise using Internet communication is developed. The system includes the environmental noise measurement equipment and the controller for the noise measurement and analysis, evaluation, management.

• Journal of Korean Society for Quality Management
• /
• v.34 no.1
• /
• pp.54-72
• /
• 2006

In recent years, the widespread application of quality management and measurement reliability has put increasing emphasis on procedures for periodic instrument calibration. By optimizing calibration intervals, unnecessary calibrations can be minimized, thereby reducing costs. Moreover, optimizing intervals will improve compliance with regulatory directives while ensuring maximal compliance with reliability targets. In this paper, we present Calibration Interval Analysis Program developed using several establishment methodologies of calibration interval for measurement quality and reliability improvement. Also, we perform calibration interval analysis for some measurement instruments and analyse its results.

• Fashion & Textile Research Journal
• /
• v.6 no.1
• /
• pp.102-108
• /
• 2004

The anthropometric measurement and the photometric measurement for have been conducted 358 children from 4 years old to 6 years old to design children's clothing. The characteristics of body type were grasped among total 44 measurement items according to the aging, being extracted seven factors from factor analysis. From cluster analysis among the seven factors the three body types were classified. Type 1 shows low fat body with a small figure and short upper body. The body has a round belly and waist. Type 2 shows the fattest body with an average height. The body has been backed with lower shoulders. Type 3 shows common fat body with a high height and a big figure. The body shows crooked round back with a big upper body and rising shoulders.

• Journal of Korean Society for Quality Management
• /
• v.28 no.1
• /
• pp.175-195
• /
• 2000

In this study, we developed a statistical software for measurement systems analysis. This software is patterned after the Measurement Systems Analysis Reference Manual developed by the Automotive Industry Action Group (AIAG). This software includes stability analysis, bias and linearity analysis, and gage R&R studies. This software was developed by using Delphi(version 4.0) and can be implemented on MS Windows 95 or higher level.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.83-91
• /
• 2018

In this paper, usefulness of marine radar for water waves measurement in coastal waters is presented. We installed a marine radar to acquire radar images of water wave around light beacon at Jujeon in Ulsan. Also, a series of analysis procedures for obtaining the wave information from the acquired image is described with a schematic diagram. We compared analysis results of radar images with measurement values using wave height gauge at light beacon. In order to improve accuracy of analysis results, detailed water depth information is essential. In conclusion, in case of the use of radar for water waves measurement, it is shown that it is very necessary to increase the accuracy of measurement by consideration of the water depth in the dispersion relation of water waves.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2323-2326
• /
• 2003

Theoretical analysis of the depth measurement system with the use of a single camera and a rotating mirror has hem done. A camera in front of a rotating mirror acquires a sequence of reflected images, from which depth information is extracted. For an object pint at a longer distance, the corresponding pixel in the sequence of images moves at a higher speed. In this paper, the principle d the depth measurement-based on the relation of the pixel movement speed and the depth of objects have been investigated. Also, necessary mathematics to implement the technique is derived and presented. The factors affecting the measurement precision have been studied Analysis shows that the measurement m increases with the increase of depth. The rotational angle of the mirror between two image-takings also affects the measurement precision. Experimental results using the real camera-mirror setup are reported.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1470-1481
• /
• 2004

The purpose of this study was to research on facial shape to suggest a quantified data for the domestic apparel and beauty industry. Conducted a measurement research of 278 female college students, We took the photographs of front view and lateral view of the subjects by digital camera and obtained the 69 measurements through the facial measurement program. 264 ,subjects' measurement data were analyzed by various statistical methods such as descriptive analysis, factor analysis and cluster analysis. Using the 69 measurement items,4 factors were selected as key factors for the factor analysis of facial shape, the factors are: \circled1 Front face height \circled2 Side face radial length \circled3 Front face breadth \circled4 Ear height and Gnathion radial length. We categorized the facial shape into four types by cluster analysis. Type 4 is the most common facial shape in female college students: \circled1 Type 1: Round face \circled2 Type 2: Oval face \circled3 Type 3: Square face \circled4 Type 4: Heart shaped face According to the facial shape analysis, facial shape of female college students are consisting of Heart shaped face(34.8%), Round face(29.2%), Square face(23.5%), oval face(12.5%).

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.114-118
• /
• 2021

In this research, the dimensional error of the measured specimen according to the measurement method was analyzed for the length, angle, radius of curvature and diameter using a projector which is used in industry. One-way analysis was performed on each data tested 30 times using a statistical technique. Through the experiment, it was found that an error occurred in each data when measuring the length and radius of curvature according to the measurement method, and the null hypothesis that no error occurred when measuring the angle and length was established. Based on this experimental data, the automatic measurement when measuring the projector causes less measurement error, so automatic measurement is recommended when measuring a small product. Also, an optimal measuring method is suggested for securing reliability on formulations of measurement automation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.209-213
• /
• 2021

For the human body shape information, body measurement techniques using a tape measure or image analysis are used. However, there is a demand for a method with high measurement accuracy and reproducibility while being simple. In this paper, domestic and foreign patent research related to body size measurement technology was conducted to identify the development trend of the related technology. WISDOMAIN DB was used to search for patents published in Korea, the United States, Japan, and Europe, and valid patents were derived by defining the technical scope of major and medium classifications and sub-categories. For the derived patents, patent trends by year, major applicants by country, and the status of technological fields were analyzed. In the field of body size measurement technology, the proportion of patent applications filed in Korea is high, indicating that Korea is leading the patent application in this field. Although the number of patent applications in the field of sensor-type measurement technology was not large, it has an advantage in measurement simplicity, so the development of related technology is expected to contribute to the improvement of measurement accuracy related to body composition analysis.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.11
• /
• pp.626-633
• /
• 2003

Theoretical analysis of the depth measurement system with the use of a single camera and a rotating mirror has been done. A camera in front of a rotating mirror acquires a sequence of reflected images, from which depth information is extracted. For an object point at a longer distance, the corresponding pixel in the sequence of images moves at a higher speed. Depth measurement based on such pixel movement is investigated. Since the mirror rotates along an axis that is in parallel with the vertical axis of the image plane, the image of an object will only move horizontally. This eases the task of finding corresponding image points. In this paper, the principle of the depth measurement-based on the relation of the pixel movement speed and the depth of objects have been investigated. Also, necessary mathematics to implement the technique is derived and presented. The factors affecting the measurement precision have been studied. Analysis shows that the measurement error increases with the increase of depth. The rotational angle of the mirror between two image-takings also affects the measurement precision. Experimental results using the real camera-mirror setup are reported.