• Korean Journal of Cognitive Science
• /
• v.28 no.1
• /
• pp.1-26
• /
• 2017

This study investigated the cortical generators of P300 in college students with schizotypal traits by using an auditory oddball paradigm, event-related potentials (ERPs) and standardized low resolution brain electromagnetic tomography (sLORETA) model. We also investigated the relationship between the current density of P300 and the clinical symptoms of schizophrenia. Based on the scores of Schizotypal Personality Questionnaire(SPQ), schizotypal trait (n=37) and control (n=42) groups were selected. For the measurement of P300, an auditory oddball paradigm, in which frequent standard tones (1000Hz) and rare target tones (1500Hz) were presented randomly, was used. Participants were required to count the number of the target tones during the task and report this at the end of the experiment. The two groups did not differ significantly in the accuracy of the oddball task. The schizotypal trait group showed significantly smaller P300 amplitudes than control group. In terms of source localization, both groups showed the P300 current density over bilateral frontal, parietal, temporal and occipital lobes. However, the schizotypal trait group showed significantly reduced activations in the left superior temporal gyrus and the right middle temporal gyrus, but increased activations in both left inferior frontal gyrus and right superior frontal gyrus compared to the control group. Furthermore, a negative correlation between the current density of the right superior frontal gyrus and SPQ disorganization score was found in the schizotypal trait group. These findings indicate that the individuals with schizotypal traits have dysfunctions of frontal and temporal areas, which are known to be the source of P300, as observed in patients with schizophrenia. In addition, the present results indicate that the disorganization score, rather than total score, of the SPQ is useful in predicting the risk of future schizophrenia.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.279-284
• /
• 2008

The phase change materials have been extensively used as an optical rewritable data storage media utilizing their phase change properties. Recently, the phase change materials have been spotlighted for the application of non-volatile memory device, such as the phase change random access memory. In this work, we have investigated the crystallization behavior and microstructure analysis of In-Sb-Te (IST) thin films deposited by RF magnetron sputtering. Transmission electron microscopy measurement was carried out after the annealing at $300^{\circ}C$, $350^{\circ}C$, $400^{\circ}C$ and $450^{\circ}C$ for 5 min. It was observed that InSb phases change into $In_3SbTe_2$ phases and InTe phases as the temperature increases. It was found that the thickness of thin films was decreased and the grain size was increased by the bright field transmission electron microscopy (BF TEM) images and the selected area electron diffraction (SAED) patterns. In a high resolution transmission electron microscopy (HRTEM) study, it shows that $350^{\circ}C$-annealed InSb phases have {111} facet because the surface energy of a {111} close-packed plane is the lowest in FCC crystals. When the film was heated up to $400^{\circ}C$, $In_3SbTe_2$ grains have coherent micro-twins with {111} mirror plane, and they are healed annealing at $450^{\circ}C$. From the HRTEM, InTe phase separation was occurred in this stage. It can be found that $In_3SbTe_2$ forms in the crystallization process as composition of the film near stoichiometric composition, while InTe phase separation may take place as the composition deviates from $In_3SbTe_2$.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.87-98
• /
• 2008

Purpose : This study was designed to figure out the necessity of continuing basic CPR education for the higher grade students of elementary school. The assessment contents were knowledge, practice ability, precision level of CPR skills and continuation of the educational efficiency. Methods : Twenty two students of 4th and 5th grade of elementary school in K city in Chungcheongnam-do were recruited for this study. The study method was a control group of non-synchronized design. A preliminary study was done on October 27 in 2006. The main study was performed from February 14 to May 11 in 2007. The researcher adopted the method of Kyung-hui, Kang (1998) such as awareness, attitude and knowledge in control group, emergency medical technician test protocol, Anne/SkillReporter$^{(R)}$ in case of the basic CPR knowledge. Four times of measures were done in shortly after practicing CPR, 4 weeks after the education, 8 weeks after the education, and 12 weeks after the education. By using SPSS/PC+ (version 12.0), the researcher analyzed the collected data based on frequency, percentage, repeated measurement, ANOVA (analysis of variance), and sidak (multiple comparison - sidak). Results : 1) The confidence of people in the control group in terms of practicing CPR showed a statistically meaningful difference (t = 10.230, p = .000) before/after CPR education. Therefore, hypothesis No.1-1 was accepted. 2) The educational necessity of people in the control group showed no statistically meaningful difference (t = -1.695, p = 0.105) before/after CPR education. Therefore, hypothesis No.1-2 was rejected. 3) The knowledge points of people in the control group showed a statistically meaningful difference (t = -7.731, p = .000) before/after CPR education. Therefore, hypothesis No.2 was accepted. 4) The confidence of people in the control group in terms of practicing CRP showed no meaningful difference (F = 2.789, p = 0.072) as time passed. Therefore, hypothesis No.3 was rejected. 5) The knowledge of people in the control group showed a meaningful difference (F = 9.090, p = .000) as time passed. Therefore, hypothesis No.4 was accepted. 6) The capability of people in the control group in terms of practicing CPR showed a statistically meaningful difference (F = 42.795, p = .000) as time passed. Therefore, hypothesis No.5 was accepted. 7) The precision level of CPR skill of people in the control group showed a statistically meaningful difference (F = 25.198, p = .000) as time passed. Therefore, hypothesis No.6-1 was accepted. 8) The precision level of chest compression skill of people in the control group showed a statistically meaningful difference (F = 5.188, p = .003). Therefore, hypothesis No.6-2 was accepted. Conclusion : In a nutshell, CPR education for the 4th and 5th graders of elementary schools had an influence on their confidence in practicing CPR and on their knowledge. This study showed that as time passed. the educational effect declined in terms of knowledge point, capability of practicing CPR, and the precision level of CRP skill. The results of the study could be postulated into the fact that re-education within 8 weeks after the first education was essential to retaining the educational effect. Therefore, we need to vitalize the CPR education for elementary school students repeatedly on a regular basis in order to continue the educational effect after they were grown-ups and to make them play their roles as a first aider.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.581-587
• /
• 2017

This study was based on the data of total mineral content of about 99% at the age of 16-26 years, we aimed at female university students who are important for bone formation in their early 20s. The purpose of this study was to investigate factors of eating habits affecting their bone density and to provide data to prevent osteoporosis which might occur in the future. It was conducted on 100 female university students in their 20s, the bone mineral density according to BMI was measured by DEAX, and the analysis of 10 eating habits items and the results of BMD measurement on their own results in Excel 2010. As a result, the height was $161.08{\pm}4.70cm$, the weight was $52.43{\pm}6.43kg$, and the BMI was $20.22{\pm}2.48$, which correlated with BMD (p<0.05). According to the BMI classification, 20 had low weight and 80 had normal weight, and BMD was $0.20{\pm}0.41$ at normal weight. In the same sex, the mean T-score of the young adult group was $-0.04{\pm}0.99$ compared with the BMD of the young adult group, and the mean Z-score of the same age group was $0.02{\pm}0.93$ (p<0.001). Eating habits affecting bone mineral density were significantly affected by 3 meals per day, 1-3 cups of coffee per day and p<0.05 for Low salt formula intake. 6-9 dairy product intake was also p<0.05 but not significant. Therefore, it is considered that when 20s female students become middle-aged woman, they should have proper eating habits so that osteogenesis can be improved at young age in order to prevent bone disease.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.461-470
• /
• 2019

This study was carried out to quantify the drought stress in grafted watermelon seedlings non-destructively by using chlorophyll fluorescence (CF) imaging technique rather than the visual judgment. Six-day old watermelon seedlings were grown under uniform irrigation for 3 days, and then given drought stress. Afterward, the sensor for the measurement of water content in plug tray cell unit was used to classify the drought-stress level into nine groups from D1 (53.0%, sufficient moisture state) to D9 (15.7%, extremely dry stress), and the 16 CF parameters were measured. In addition, re-irrigation was performed on the drought stressed seedlings(D5 - D9) to determine the growth and photosynthesis recovery level, which was not confirmed by visual judgment. The kinetic curve patterns of CF in three different drought stressed seedling groups were found to be different for the early detection of drought stress. All the 16 CF parameters decreased continuously with exposure to drought stress and drastically decreased from D5 (32.1%) where the visual judgment was possible. The fluorescence decline ratio (Rfd_Lss) started to decrease from the initial drought stress level (D5 - D6), and the Maximum PSII quantum yield (Fv/Fm) was significantly decreased in the later extreme drought stress range (D7 - D9) by re-irrigation recovery test. Thus, Rfd_Lss and Fv/Fm parameters were finally selected as potent indicators of growth and photosynthesis recovery in the initial and later stages of drought stress. Also, to the differences in the numerical values of the individual chlorophyll fluorescence parameters, the drought stress level was intuitively confirmed through the image. These results indicate that Rfd and Fv/Fm can be considered as potential CF parameters for the detection of low and extremely high drought stress, respectively. Furthermore, Fv/Fm can be considered as the best CF parameters for recovery at re-irrigation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.1
• /
• pp.103-113
• /
• 2019

Spatial resolution is still one of the most important parameters for evaluating image quality. In this study, we propose an approach to evaluate spatial resolution and MTF(Modulation Transfer Function) using bar target and Siemens star chart as a part of quality evaluation for UAV images. To this end, images were taken with a fixed-wing eBee(Canon IXUS) at the flight height of 130m and 260m, and with a rotary-wing GD-800(SONY NEX-5N) at flight height of 130m, with a Phantom 4 pro(FC 6310) at flight height of 90m, respectively. Spatial resolution was measured on orthoimages produced from this data. Results show that the resolution measured on the Siemens star and bar target was accurately degraded in proportion to the flight height regardless of the cameras. In the words, the spatial resolution of images taken at the same altitude of 130m with the eBee(Canon IXUS) and the GD-800(SONY NEX-5N) equipped with different cameras was the same as 4.1cm, and that of the eBee(Canon IXUS) at 260m was 8.0cm. In addition, the resolution measured on the Siemens star was about 1~2cm lower than that of the bar target at every flight height. The general tendency was also found to be proportional to the flight height in the measurement of the ${\sigma}_{MTF}$ from MTF, which simultaneously represents the resolution and contrast information of the image. However, at the same altitude of 130m, the ${\sigma}_{MTF}$ of the GD-800(SONY NEX-5N) is 0.36 and the eBee(Canon IXUS) is 0.59, which shows that the GD-800(SONY NEX-5N) has better camera performance. It is expected that study results will contribute to the analysis of spatial resolution of UAV images and to improve the reliability of quality.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.148-165
• /
• 2017

Mural paintings drawn inside ancient tombs are very sensitive to changes in the environment such as temperature and humidity, especially the finish layer of the tomb murals differ in preservability depending on the material properties and humidity conditions. In this study, I examined the mural painting of Songsan-ri Tomb No.6, where the finish layer was made of earth, and identified the physical changes that can occur due to drying, depending on the material properties of the finish layer. I found out through particle size analysis that the finish layer of the mural painting in Songsan-ri Tomb No.6 is about 85.0wt% below silt, about 14.0wt% clay therein, mostly composed of silt and below clay. I also found out through physical property evaluation that surface change rate of samples showed the largest change at 15.5% in reproduced finish layer sample made up of bentonite, followed by 7.8% of reproduced finish layer sample made up of celadon soil, 6.3% of reproduced finish layer sample made up of loess, 6.2% of reproduced finish layer sample composed of white clay and the same order of change in appearance was confirmed in each sample consisted of soil. In addition, it showed the same trend of surface change rate, and the bentonite condition showed the largest change, in the measurement of shrinkage rate and expansion rate. The experiment shows that the finish layer composed of soil is affected by cohesion among particles according to the content of fine parts and the relationship between the agglomeration due to the content of the differentiated part and the stress due to the expansibility depending on the kind of the clay mineral etc. Therefore, it can be concluded that the physical damage occurred in the mural painting finish layer of the Songsan-ri Tomb No.6 is related to the factors such as the material characteristics of the soil and the highly humid environmental change inside the tomb.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1596-1604
• /
• 2004

Quality Function Deployment(QFD) is a product development tool which ensures that the voice of the customer needs is heard and translated into products. To develop a sensible brassiere for middle-aged women QFD was adopted. In this study the applicability and usefulness of QFD was examined through the engineering design process for a sensible brassiere for middle-aged women. The customer needs for the wear comfort of brassiere was made by one-on-one survey of 100 women who aged 30-40. The customer competitive assessment was generated by wearing tests of 10 commercial brassieres. The subjective assessment was conducted in the enviornmental chamber that was controlled at $28{\pm}1^{\circ}C,\;65{\pm}3\%RH.$ As a results, we developed twenty-one customer needs and corresponding HOWs for the wear comfort of brassiere. The Customer Competitive Assessment was generated by wearing tests of commercial brassiere. The subjective measurement scale and dimension for the evaluation of sensible brassiere were extracted from factor analysis. Four factors were fitting, aesthetic property, pressure sensation, displacement of brassiere due to movement. The most critical design parameter was wire-related property and second one was stretchability of main material of brassiere. Also, wearing comfort of brassiere was affected by the interaction of initial stretchability of wing and support of strap. Engineering design process, QFD was applicable to the development of technical and aesthetic brassieres.

• Journal of Intelligence and Information Systems
• /
• v.21 no.2
• /
• pp.19-47
• /
• 2015

In this era of knowledge economy, a variety of virtual communities are proliferating for the purpose of knowledge creation and utilization. Since the voluntary contributions of members are the essential source of knowledge, member turnover can have significant implications on the survival and success of virtual communities. However, there is a dearth of research on the effect of membership turnover and even the method of measurement for membership turnover is left unclear in virtual communities. In a traditional context, membership turnover is calculated as the ratio of the number of departing members to the average number of members for a given time period. In virtual communities, while the influx of newcomers can be clearly measured, the magnitude of departure is elusive since explicit withdrawals are seldom executed. In addition, there doesn't exist a common way to determine the average number of community members who return and contribute intermittently at will. This study initially examines the limitations in applying the concept of traditional turnover to virtual communities, and proposes five membership fluidity measures based on a preliminary analysis of editing behaviors of 2,978 featured articles in English Wikipedia. Subsequently, this work investigates the relationships between three selected membership fluidity measures and group collaboration performance, reflecting a moderating effect dependent on work characteristic. We obtained the following results: First, membership turnover relates to collaboration efficiency in a right-shortened U-shaped manner, with a moderating effect from work characteristic; given the same turnover rate, the promotion likelihood for a more professional task is lower than that for a less professional task, and the likelihood difference diminishes as the turnover rate increases. Second, contribution period relates to collaboration efficiency in a left-shortened U-shaped manner, with a moderating effect from work characteristic; the marginal performance change per unit change of contribution period is greater for a less professional task. Third, the number of new participants per month relates to collaboration efficiency in a left-shortened reversed U-shaped manner, for which the moderating effect from work characteristic appears to be insignificant.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.238-243
• /
• 2009

To investigate the characteristics of moisture content (MC), moisture distribution and starting point of drainage in a rockwool slab culture, time domain reflectometry (TDR) sensors were used in a drip irrigation system. MC values ($0{\sim}100%$) measured by TDR sensors in a slab were compared to those by loadcells. Seventy two seedlings of paprika (Capsicum annuum L.) were cultured for $5{\sim}6$ months in a green-house and the starting point of irrigation was determined by the average value of three TDR sensors which were inserted diagonally across the slabs under the plants. MCs as a standard for starting point of irrigation by TDR were determined with 40%, 50%, and 60%. Distribution of MCs in a slab measured with five TDR sensors equally spaced from two irrigation points were not much different when the MC in the slab increased from zero to saturation point. The saturated MCs in the slab were presented at $58{\sim}65%$ and the drain was started when the MC became around $50{\sim}55%$. At the saturated MC in the slab, TDR sensors presented 100% but the values from the loadcell showed 90% at the same time. However, measurement errors between two methods for MC remarkably decreased with a decrease in the MC in a slab. Especially when the MC was maintaining below 60%, the errors between TDR and loadcell methods for measuring MC in the rock-wool slab were less than 5%. There were no significant differences in number of fruits and fresh and dry weights of fruits when they were cultured under the different MC conditions with three irrigation regimes (40%, 50%, and 60%). These results indicated that the MC control by TDR sensors in a rock-wool based paprika culture can be suggested as a method to determine the starting point of irrigation for a soilless culture system.