• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.70-71
• /
• 2021

The unit quantity that affects the workability, shrinkage cracking, and durability of concrete is an important factor. Methods for measuring the unit quantity include a high frequency heating method, a capacitance method, a unit volume mass method, and a simple method. However, these methods have the disadvantage of poor measurement method, time required, and precision. To solve this problem, a relatively simple and fast measurement method was adopted to compensate for the shortcomings through a Frequency Domain Reflection (FDR) sensor, and the unit quantity was used. In addition, the measurement data was analyzed by deep learning to evaluate the unit quantity of concrete.

• Journal of Pharmacopuncture
• /
• v.13 no.1
• /
• pp.93-101
• /
• 2010

Objective : Standard of measurement in Korean Medicine has been changed in dynasty and location. Thus, cun (寸) and chi (尺) as unit of measurement for meridians and acupoints could be recognized as the length of equally divided portions of a certain long bone or the distance between two anatomical landmarks and as an symbolical meaning to date. The goal of this study is to propose a new standard measurement in the metric system for the relative measurement of cun and chi as unit of measurement for meridians and acupoints in normal male legs. Methods : This study was conducted by gauging each parts of normal male legs in the metric system and comparing to the relative measurement of cun and chi as follows; to calculate 1 cun, the length of each parts was divided into the unit of cun referred to Measurement of the Bone in Neijing Lingshu (靈樞 骨度篇); it was compared the unit of cun referred to Measurement of the Bone in Neijing Lingshu with cun which was calculated by dividing subject's height into 75 cun, respectively. Result : There has no significant difference in length of 1 cun among each leg's areas based on a standard of subject's height. The unit of cun by the metric length in the legs was similar to the unit of cun referred to Measurement of the Bone in Neijing Lingshu based on each subject's height. Conclusion : It is suggested that an unit of cun as the measurement for meridians and acupoints in the male legs should be considered to the ranges from 2.4cm to 2.6cm.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.367-370
• /
• 2005

In this study, air meter method and capacitance measurement method to apply economically at quality control of ready-mixed concrete among various unit water content measurement technique was selected. Then, it was evaluated estimating performance of unit water content according to the change of water-binder ratio and unit water content. Also, it was examined influence about error occurrence of unit water content by change of properties of used materials. Finally, based on this study, it was proposed fundamental data to utilize measurement technique of unit water content to quality control. of ready-mixed concrete in construction field.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.356-363
• /
• 2010

In this Paper, We study on establish for unit of measure. Quality means abstract for customer needs. we surveyed unit of measurement of quality feature of Juran, Taguchi, 6 sigma method. We suggest unit of measurement of quality feature. Each enterprise can use defining own unit of measurement of quality feature. Effect is expected in enterprise that these proposals do quality control. There is meaning in direction that measuring mean of quality feature that propose in this treatise understands actuality to be deeply and reconcile exact point of theory.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.163-172
• /
• 2013

In this Paper, We study on establish for unit of measure. Quality means abstract for customer needs. we surveyed unit of measurement of quality feature of Juran, Taguchi, 6 sigma method. We suggest unit of measurement of quality feature. Each enterprise can use defining own unit of measurement of quality feature. Effect is expected in enterprise that these proposals do quality control. There is meaning in direction that measuring mean of quality feature that propose in this treatise understands actuality to be deeply and reconcile exact point of theory.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.157-165
• /
• 2011

In this Paper, We study on establish for unit of measure. Quality means abstract for customer needs. we surveyed unit of measurement of quality feature of Juran, Taguchi, 6 sigma method. We suggest unit of measurement of quality feature. Each enterprise can use defining own unit of measurement of quality feature. Effect is expected in enterprise that these proposals do quality control. There is meaning in direction that measuring mean of quality feature that propose in this treatise understands actuality to be deeply and reconcile exact point of theory.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.565-572
• /
• 2009

This paper presents the optimization steps with weight and importance of estimated characteristic values in the multiresponse surface analysis(MRA). The research introduces the shape parameter of individual desirability function for relaxation and tighening of specification bounds. The study also proposes the combinded desirability function using arithmetic, geometric and harmonic means considering the measurement unit and numerical pattern.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.6 no.2
• /
• pp.13-24
• /
• 2011

In this Paper, We study on establish for unit of measure. Quality control is means control for customer needs. We surveyed unit of measurement of quality feature of Juran and Taguchi teaching. We suggest new measure of quality feature. New quality measure which is combined with several quality control measures. Which measurement can be used management control of managerial level of company. We expect this new measurements can be applied and well used.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.3
• /
• pp.537-543
• /
• 2002

This paper examines a new in-process measurement system for the measurement of micro-defects on the surfaces of brittle materials by using the AFM (Atomic Force Microscopy). A new AFM scanning stage that can also perform nano-scale bending of the sample was developed by adding a bending unit to a commercially available AFM scanner. The bending unit consists of a PZT actuator and sample holder, and can perform static and cyclic three-point bending. The true bending displacement of the bending unit is approximately 1.8mm when 80 volts are applied to the PZT actuator. The frequency response of the bending unit and the stress on the sample were also analyzed, both theoretically and experimentally. Potential surface defects of the sample were successfully detected by this measurement system. It was confirmed that the number of micro-defects on a scratched surface increases when the surface is subjected to a cyclic bending load.

• Journal of the Korean Statistical Society
• /
• v.24 no.2
• /
• pp.481-493
• /
• 1995

An ARIMA signal observed with measurement error is shown to have another ARIMA representation with nonlinear restrictions on parameters. For this model, the restricted Newton-Raphson estimator(RNRE) of the unit root is shown to have the same limiting distribution as the ordinary least squares estimator of the unit root in an AR(1) model tabulated by Dickey and Fuller (1979). The RNRE of parameters of the ARIMA(p,1,k) process and unit root tests base on the RNRE are developed.