• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.487-493
• /
• 2004

본 연구는 고효율 비접촉 초음파 송수신이 가능한 미세가공 정전용량형 초음파 탐촉자(cMUT)를 개발하기 위한 기초연구로 수행되었다. cMUT의 주요 구성요소인 미세 진동 막의 거동-총진 주파수, 막 변위, 막 붕괴 변위, 막 붕괴전압-을 이론적인 해석과 유한요소해석을 이용하여 분석하였다. 진동 막의 두께와 크기, 희생층 두께, 전극의 두께와 크기 등과 같은 cMUT의 설계인자를 검토하였다. 분석결과 진동 막의 공진주파수는 진동 막의 두께가 증가함에 따라 증가하였으며 직경에 따라서는 감소하였다. 직류 바이어스 전압이 증가함에 따라 진동 막의 변위는 증가하였으며 진동 막의 붕괴전압을 분석하였다.

• Progress in Superconductivity
• /
• 제11권2호
• /
• pp.152-157
• /
• 2010

We have fabricated the low noise liquid helium(LHe) dewar with a different shape of thermal shield to apply the 64-channel SQUID(Superconducting Quantum Interference Device) gradiometer. The first shape of thermal shield was made of an aluminum plate with a wide width of 100 mm slit and the other shape was modified with a narrow width of 20 mm slit. The two types of dewars were estimated by comparing the thermal noise and the signal-to-noise ratio(SNR) of magnetocardiography(MCG) using the $1^{st}$ order SQUID gradiometer system cooled each dewar. The white noise was different as a point of the dewar. The noise was increased as close as the edge of dewar, and also increased at the thermal shield with the more wide width slit. The white noise of the dewar with thermal shield of 100 mm slit was 6.5 fT/$Hz^{1/2}$ at the center of dewar and 25 fT/$Hz^{1/2}$ at the edge, and the white noise of the other one was 3.5 - 7 fT/$Hz^{1/2}$. We measured the MCG using 64-channel SQUID gradiometer cooled at each LHe dewar and compared the SNR of MCG signal. The SNR was improved of 10 times at the LHe dewar with a modified thermal shield.

• 비파괴검사학회지
• /
• 제24권6호
• /
• pp.581-589
• /
• 2004

본 연구는 선행연구의 결과를 바탕으로 cMUT를 개발하여 그 특성을 분석하기 위하여 수행되었다. 미세 반도체 제작공정을 적용하여 cMUT를 제작하여 단면특성을 측정하여 분석하였다. 제작된 cMUT의 미소 진동 막의 변위를 측정할 수 있는 마이켈슨 위상변조 간섭계를 구성하여 측정결과와 이론적인 해석결과와 비교하였다. cMUT의 초음파 특성을 분석하기 위하여 송수신 시스템을 구성하였다 비접촉 방법으로 cMUT에 의해 발생되는 초음파 신호를 수신하여 수신파형의 특성을 분석한 결과 양호한 주파수 특성을 나타내었다. 본 연구에서 개발된 cMUT는 향후 비접촉식 초음파 응용분야에 다양하게 활용될 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.806-808
• /
• 1999

An automatic measurement system of high value resistance standards($10M{\Omega}$ and $1G{\Omega}$) was developed. A system has been assembled with programmable do calibrators in two of the arms. An electrometer is used to measure the difference in currents flowing through the remaining two arms of the bridge consisting of unknown and standard resistors. Type A standard uncertainty was 2ppm in the $10M{\Omega}$, 1 ppm in the $1G{\Omega}$.

• 열처리공학회지
• /
• 제14권5호
• /
• pp.275-281
• /
• 2001

To improve the reliability of hardness test results, Rockwell hardness round robin test was carried out for 10 laboratories. The test condition was the same with the ISO(International Standards Organization) standards. Korea Research Institute of Standards and Science(KRISS) supplied the hardness standard blocks and an indenter to laboratories for the measurement. The participating laboratories measured hardness of the specified areas on the blocks for 6 times with their own indenter as well as common indenter, respectively, and reported the results to KRISS. The result showed that quite large amount of the differences came from the indenter and it is necessary to change indenter with better quality for improved reliability in hardness measurement.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.295-305
• /
• 2012

Purpose: This study identified the standardization activities from the early stage of acquisition to disposal during the materiel life cycle and proposed the improvement of standardization process. Methods: Through improvement of duplicated deliberation for the revision of military specification, unification of technical change proposal reception organization, and resolution between the conflicting parts of laws and regulations, simplifying the standardization procedure and strengthening linkages between the civilian standards were gained. Results: We have redefined the concept of the standards and standardization in the field of defense and proposed the standards-driven documentary standards as a measurement standards and reference standards to expand the activities. Conclusion: Through a standardization survey, we came to conclusion that we need to change the concept of standardization in the field of national defense from making the specification to using the means of efficient management of military resources.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술대회지
• /
• pp.249-249
• /
• 2004

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.482-483
• /
• 2007

For measurement of dielectric constants, the commercial parallel plate electrodes system with guard-ring electrode have been widely used up to now. The capacitance derived from the parallel plate electrodes capacitor with guard-ring electrode is calculated by the equation of ($C={\epsilon}\;{\cdot}\;\frac{area\;of\;electrod}{distance\;between\;electrodes}$). Therefore, in parallel plate electrode capacitor, the diameter of the guarded electrode, the gap size between guarded electrode and guard ring, and distance between two active electrode should be measured precisely to calculate dielectric constants from the measured capacitance. Consequently their mechanical measurement uncertainties are directly contributed. Especially the air-gap between the electrodes and dielectric specimen at the system must be existed and the measurement error derived from the air-gap is impossible to evaluate as measurement uncertainties. In this study, we analyze the uncertainty of the commercial dielectric constant test cell using 3 kinds CRMs.

• 센서학회지
• /
• 제32권6호
• /
• pp.447-454
• /
• 2023

The Korea Laboratory Accreditation Scheme (KOLAS) operates accreditation programs for ensuring measurement traceability with the International System (SI) of Units - the highest calibration standard that measurements can be tested against. As of September 2023, there are 70 KOLAS-accredited laboratories in the Republic of Korea that specialize in humidity calibration. Among them, 32 KOLAS laboratories, along with one laboratory not affiliated with KOLAS, participated in the proficiency test (PM 2023-11) for relative humidity transducers in 2023. This proficiency test was conducted within a relative humidity range of 20-90% at a temperature of approximately 20 ℃, taking into consideration the calibration and measurement capability (CMC) of the participating laboratories. The primary objective of the proficiency test was to establish the measurement equivalence between each participating laboratory and the reference laboratory, by calculating the number of equivalence (En). When |En| was less than 1, the measurements from the participating and reference laboratory were equivalent. Out of the 33 participating laboratories, 32 successfully met this criterion and passed the proficiency test.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.18-18
• /
• 2010

Methods of the characteristics evaluation of turbo-molecular pumps (TMP) are well-defined in the international measurement standards such as ISO, PNEUROP, DIN, JIS, and AVS. The Vacuum Center in the Korea Research Institute of Standards and Science has recently designed, constructed, and established the integrated characteristics evaluation system of TMPs based on the international documents by continuously pursuing and acquiring the reliable international credibility through measurement perfection. The measurement of TMP pumping speed is normally performed with the throughput and orifice methods dependent on the mass flow regions. However, in the UHV range of the molecular flow region, the high uncertainties of the gauges, mass flow rates, and conductance are too critical to precisely accumulate reliable data. With UHV gauges of uncertainties less than 15% and a calculated conductance of the orifice, about 35% of pumping speed uncertainties are experimentally derived in the pressure range of less than $10^{-6}$ mbar. In order to solve the uncertainty problems of pumping speeds in the UHV range, we introduced an SRG with 1% accuracy and a constant volume flow meter (CVFM) to measure the finite mass flow rates down to $10^{-3}$ mbar-L/s with 3% uncertainty for the throughput method. In this way we have performed the measurement of pumping speed down to less than $10^{-6}$ mbar with an uncertainty of 6% for a 1000 L/s TMP. In this article we suggest that the CVFM has an ability to measure the conductance of the orifice experimentally with flowing the known mass through the orifice chambers, so that we may overcome the discontinuity problem encountering during introducing two measurement methods in one pumping speed evaluation sequence.