• 제목/요약/키워드: Measurement Equivalence

검색결과 104건 처리시간 0.022초

삶의 만족 척도(Satisfaction With Life Scale: SWLS)의 연령 및 성별 측정 동일성 검증 (Measurement Invariance of the Satisfaction with Life Scale (SWLS) across Age and Gender in Korea)

  • 구재선
    • 한국심리학회지 : 문화 및 사회문제
    • /
    • 제25권4호
    • /
    • pp.305-323
    • /
    • 2019
  • SWLS(Satisfaction With Life Scale)는 국내외에서 가장 많이 사용되는 삶의 만족도의 측정도구이다. 본 연구는 연령과 성별이 다른 집단에서 SWLS의 요인구조와 측정동일성을 검토했다. 성인 초기 대학생 433명(남자 195명, 여자 238명)과 중년기 성인 503명(남자 237명, 여자 266명)으로 구성된 총 936명의 자료를 분석한 결과는 다음과 같다. 첫째, 확인적 요인분석을 사용하여 SWLS의 요인 구조를 검토했을 때, 4번과 5번 문항간 잔차를 허용한 수정된 단일요인모형이 지지되었다. 따라서 SWLS는 한국에서도 과거 시점을 반영하는 4번과 5번 문항이 다른 문항들과 구별되는 속성을 공유하는 것으로 확인되었다. 둘째, SWLS는 남성과 여성 집단 간에 형태, 요인부하량, 절편, 오차변량의 동일성이 모두 지지되었다. 그러나 대학생과 중년의 성인 집단 간에는 부분측정동일성만이 지지되었다. 이러한 결과는 SWLS 척도를 사용하여 한국인의 연령 및 성별 삶의 만족도를 비교하는 것이 가능하지만, 연령차를 해석할 때에는 보다 세심한 주의를 기울일 필요가 있음을 시사한다.

중환자 통증사정을 위한 한국어판 Critical care Pain Observation Tool (CPOT)의 신뢰도 및 타당도 검증 (Validation of a Korean translated version of the Critical Care Pain Observation Tool (CPOT) for ICU patients)

  • 곽은미;오희영
    • 대한간호학회지
    • /
    • 제42권1호
    • /
    • pp.76-84
    • /
    • 2012
  • Purpose: The purpose of this methodological study was to examine the reliability and validity of a translated Korean version of the Critical Care Pain Observation Tool (CPOT) developed for assessment of pain in critically ill nonverbal patients. Methods: A cross-sectional study design was used. Data were collected from a convenience sample of 202 critically ill patients admitted to a university hospital. Upon establishment of content and translation equivalence between the English and Korean version of CPOT, psychometric properties were evaluated. Results: The interrater reliability was found to be acceptable with the weighted kappa coefficients of .81-.88. Significant high correlations between the CPOT and the Checklist of Nonverbal Pain Indicators were found indicating good concurrent validity (r=.72-.83, p<.001). Data showed the area under the ROC curve of 0.86 with a cut-off point of 1, which resulted in 76.9% sensitivity and 88.6% specificity. The mean score of CPOT during suctioning was significantly different from that of before (t= -14.16, p<.001) or 20 minutes after suctioning (t=16.31, p<.001). Conclusion: Results of this study suggest that the CPOT can be used as a reliable and valid measure to assess pain in critically ill nonverbal patients.

캉가루식 돌보기가 미숙아의 체중과 스트레스 호르몬[코티졸]에 미치는 영향 (The Effect of Kangaroo Care on Weight and Stress Hormone(Cortisol) in Premature Infants)

  • 장미영
    • Child Health Nursing Research
    • /
    • 제14권2호
    • /
    • pp.138-145
    • /
    • 2008
  • Purpose: This study, using a pre-posttest design of non-equivalence comparative groups, was done to determine effects of KC (kangaroo care) on weight and SH (stress hormone) of premature infants. Method: Participants were 31 premature infants assigned to KC(14) or CG(control group)(17). Data were collected from June 2006 to February 2007. KC was given for 60 minutes at a time, Mon, Wed, and Fri for a 10 times. Body weight was measured at a fixed time daily and serum cortisol was examined as part of routine blood testing, frequent for premature infants. Results: The weight for infants in the KC group was higher than the control. The difference was significant between both the two groups, and the 2 measurement times(F=12.7, p=.001). SH(cortisol) in infants of KC group decreased than CG, but there was no valid difference from the statistical viewpoint. Conclusion: The result of the study suggest that KC contributes to weight increase in premature infants and also that KC is effective for SH reduction in spite of the lack of statistical validity. Therefore, our conclusion is that KC can be used as an independent nursing intervention for development and advance of premature infants.

  • PDF

LIIM(Laser-Induced Ion Mobility) 계측을 이용한 매연 나노입자 측정 (Measurement of Soot Nano-Particle Using LIIM(Laser-Induced Ion Mobility))

  • 이의주
    • 대한기계학회논문집B
    • /
    • 제28권9호
    • /
    • pp.1110-1116
    • /
    • 2004
  • Experimental measurements of laser-induced ion mobility(LIIM) were performed for ethene/air premixed flames operated near the soot inception point. Soot was ionized using a pulsed laser operated at 532 nm. The ionization signal was collected with a tungsten electrode located in the post-flame region. ionization signals were collected using both a single electrode and dual electrode configuration. Prior LIIM studies have focused on the use of a single biased electrode to generate the electric field, with the burner head serving as the path to ground. In many practical combustion systems, a path to ground is not readily available. To apply the LIIM diagnostic to these geometries, a dual electrode geometry must be employed. The influence of electrode configuration, flame equivalence ratio, and flame height on ionization signal detection was determined. The efficacy of the LIIM diagnostic to detect soot inception in the post-flame region of a premixed flame using a dual electrode configuration was investigated. For the different dual electrode configurations tested, the dual parallel electrode geometry was observed to be most sensitive to detect the soot inception point in a premixed flame.

송풍기와 폐풍기를 이용한 연소기내의 부분 예혼합화염 연소 특성에 관한 실험적 연구 (Experimental Investigation on premixed combustion Characteristics with suction & blow fans)

  • 강기발;오상헌
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.143-148
    • /
    • 2001
  • We measured emission indices for $NO_x$, CO, temperature and radical characteristics for partially premixied flames formed by suction & blow fans air condition. At sufficiently high levels of partial premixing a double flame structure consisting of a rich premixed inner flame and outer diffusion flame was established similar to that previously observed in premixed flames. $NO_x$, Temperature, CO values were experimented with approximately constant air flow rate and decreasing equivalence ratios. The reduction in $NO_x$ and temperature at suction condition as compared with that for blow condition was approximately 20%, but on the contrary, CO emission was increased. In addition, We measured temperature distributions and found that temperature increased continuously with increasing partial premixing. We also estimated CH, $C_2$ radical intensity. CH and $C_2$ radicals provide evidence that, for the present measurement, CH and $C_2$ radicals intensity was associsated with their premixed component. And we observed stronger $C_2$, CH radicals intensity at suction conditions than blow conditions.

  • PDF

정적 예혼합기 연소에 있어서 2영역 모델 및 2색법에 의한 연소온도 비교에 관한 연구 (A Study on Comparisons Between Combustion Temperatures Calculated by Two-Region Model and Measured by Two-Color Method in Premixed Constant-Volume Combustion)

  • S.K.Lee
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제23권3호
    • /
    • pp.300-310
    • /
    • 1999
  • A constant-volume combustion chamber is developed to measure the burnt gas temperature over the wide ranges of equivalence ratio from 1.5 to 2.7 and pressure from 0.1 to 2.7 and pressure from 0.1 to 6 MPa by two-color method. The combustion temperature is also calculated by the conventional two-region model. The premixed fuel rich propane-oxygen-inert gas mixtures under high pressures are simultaneously ignited by eight spark plugs located on the circumference of combustion chamber with 45 degree intervals. The eight converging flames compress the end gases to high pressures. The transmissiv-ity in the chamber center during the final stage of combustion at the highest pressure is measured by in situ laser extinction method. Comparisons are made with the combustion temperatures between two-color method and two-region model. It is found that the burnt gas temperature mea-sured by two-color method is higher than that calculated by two-region model because of being the negative temperature gradient on the calculation and the temperature distribution of light path-length on the measurement and the burnt gas temperature for the turbulent combustion is higher than that of the laminar combustion under the same conditions because the heat loss for turbulent combustion is lower due to the shorter combustion period.

  • PDF

Suction과 blow fan을 이용한 연소기내의 부분 예혼합화염 연소 특성에 관한 실험적 연구 (Experimental Investigation on Premixed Combustion Characteristics with Suction & Blow Fans)

  • 강기발;김동일;오상헌
    • 한국연소학회지
    • /
    • 제7권2호
    • /
    • pp.15-23
    • /
    • 2002
  • We measured emission indices for $NO_x$, CO, temperature and radical characteristics for partially premixied flames formed by suction & blow fans air condition. At sufficiently high levels of partial premixing a double flame structure consisting of a rich premixed inner flame and outer diffusion flame was established similar to that previously observed in premixed flames. $NO_x$, Temperature. CO concentration were experimented with approximately constant air flow rate and decreasing equivalence ratios. The reduction in $NO_x$, and temperature at suction condition as compared with that for blow condition was approximately 20%, but on the contrary, CO emission was increased. In addition, We measured temperature distributions and found that temperature increased continuously with increasing partial premixing. We also estimated CH, $C_2$ radical intensity. CH and $C_2$ radicals provide evidence that, for the present measurement, CH and $C_2$ radicals intensity was associsated with their premixed component. And we observed stronger $C_2$, CH radicals intensity at suction conditions than blow conditions.

  • PDF

Influence of Adaptor on the Calibration of Inductance Standards

  • Kassim, Dewi Mohd;Kim, Dan Bee;Kim, Wan-Seop
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권2호
    • /
    • pp.911-917
    • /
    • 2018
  • Influence of the adaptors on the calibration of $100{\mu}H$ inductance standard was studied as a function of torque, applied when tightening the standard inductor terminal with the adaptor. Two different homemade adaptors of BPO gold-plated brass (BPO-Au) and banana-copper (BN-Cu) were made for the connection between the LCR meter and the inductance standard. The measured inductance (L) of the standard inductor and the contact resistance ($R_C$) between the adaptor and the standard inductor terminal showed exponential decreases against the torque increase from $25cN{\cdot}m$ to $150cN{\cdot}m$. The measured L and the calculated equivalence series resistance ($R_S$) were dependent on the adaptor type as well as on the $R_C$. The results of the adaptor analysis imply that the BPO-Au adaptor with the lower $R_C$ is more suitable for the inductance calibration. The calculated inductance of $99.956{\mu}H$ corrected by subtraction of the adaptor inductance and the contact resistance contributions from the measured value using the BPO-Au adaptor agreed well with the certificate ($99.948{\mu}H$) of the PTB within the measurement uncertainty of $140{\mu}H/H$.

부상화염에서 예혼합화염과 삼지화염의 천이적 거동(II) (A Transitional Behavior of a Premixed Flame and a Triple Flame in a Lifted Flame(II))

  • 장준영;김태권
    • 대한기계학회논문집B
    • /
    • 제29권3호
    • /
    • pp.376-383
    • /
    • 2005
  • In the paper we investigate characteristics of a transitional behavior from a premixed flame to a triple flame in a lifted flame according to the change of equivalence ratio. In previous study, we showed that the stabilized laminar lifted flame regime is categorized by regimes of premixed flame, triple flame and critical flame. A gas-chromatograph is used to measure concentration field, a smoke-wire system is used to measure streak line, and a PIV system is used to measure velocity field in lifted flame. In the visualization experiment of smoke wire, the flow divergence and redirection reappeared in premixed flame as well as triple flame. Thus we cannot express the flame front of lifted flame has a behavior of triple flame with only flow divergence and redirection. In PIV measurement, flow velocity for those three flames has minimum value at the tip of flame front. To differentiate triple flame and premixed flame, $\Phi$ value of partially premixed fraction is employed. The partially premixed fraction $\Phi$ was constant in premixed flame. In critical flame small gradient appears over the whole regime. In triple flame, typical diffusion flame shape is obtained as parabolic distribution type due to diffusion flame trailing.

SNG/공기 화염의 층류 연소속도 측정 - 분젠과 구형 화염법 비교 - (Laminar Burning Velocity Measurement of SNG/Air Flames - A Comparison of Bunsen and Spherical Flame Method -)

  • 김동찬;이기만
    • 한국수소및신에너지학회논문집
    • /
    • 제27권6호
    • /
    • pp.737-746
    • /
    • 2016
  • This article describes a comparison on laminar burning velocity measured by Bunsen and spherical flame methods of synthetic natural gas (SNG) with various composition of hydrogen. In this study, the laminar burning velocity measurements were employed by Bunsen burner and cylindrical constant combustor at which flame images were captured by Schlieren system. These results were also compared with numerical based on CHEMKIN package with GRI 3.0, USC-II and UC Sandiego mechanism. In case of spherical flames, the suitable flame radius range and theoretical models were verified using the well-known previous results in methane/air flames. As an experimental condition, hydrogen content of SNG was adjusted 0% to 11%. Equivalence ratios of Bunsen flames were adjusted from 0.8 to 1.6. On the other hand, those of spherical flames were adjusted from 0.6 to 1.4, relatively. From results of this study, the both laminar burning velocities measured in Bunsen and spherical flame methods were resulted in similar tendency. As the hydrogen content increased, the laminar burning velocity also increased collectively. Laminar burning velocity of measured SNG-air flames was best coincided with GRI 3.0 mechanism by comparison of reaction mechanisms.