• 제목/요약/키워드: Measured Rate System

검색결과 2,490건 처리시간 0.034초

로우터리 경운(耕耘)날의 회전속도(回轉速度) 및 작업속도(作業速度)가 경운소요동력(耕耘所要動力)에 미치는 영향(影響) (The effect of the revolution and forwarding speed of the rotary blade on the tilling power requirement)

  • 권순구;김성래
    • 농업과학연구
    • /
    • 제11권1호
    • /
    • pp.160-175
    • /
    • 1984
  • 로우터리 경운(耕耘)날의 회전속도(回轉速度) 및 작업속도(作業速度)가 경운소요(耕耘所要)토오크에 미치는 영향을 분석(分析)하기 위(爲)하여, 형상각(形狀角) ${\theta}=30^{\circ}$, $40^{\circ}$인 2종(種)의 경운(耕耘)날로 로우터리축(軸)을 204, 243, 285, 360rpm 4단계로, 전진속도(前進速度)는 29.40cm/s, 46.93cm/s로 변화(變化)시키면서 인공토양조(人工土壤槽)에서 dynamic strain gage system을 이용(利用)하여 경운소요(耕耘所要)토오크를 측정분석(測定分析)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 경운(耕耘)날의 회전속도(回轉速度) 및 전진속도(前進速度)는 경운소요(耕耘所要)토오크에 교호작용(交互作用)으로 영향(影響)을 미치는 것으로 분석(分析)되었으며, response surface analysis를 통(通)하여 분석(分析)한 수학적(數學的)인 모형(模型)은 다음과 같다. $$T=a_0+a_1V+a_2R+a_3VR+a_4VR^2$$ 여기서 T=경운소요(耕耘所要)토오크 (kg-m) $a_0$=당(當)수(數) $a_1,\;a_2,\;a_3,\;a_4$= 계(係)수(數) V=경운장치(耕耘裝置)의 전진속도(前進速度) (cm/s) R=경운(耕耘)날의 회전속도(回轉速度) (rpm) 2. 최대경운소요(最大耕耘所要)토오크는 로우터리날 회전속도(回轉速度)가 증가(增加)함에 따라 ${\frac{{\partial}T}{{\partial}V}}$는 증가(增加)하였으며, 200~220rpm에서 증가율(增加率)이 최저(最低)가 되었고, 같은 조건(條件)에서 ${\frac{{\partial}T}{{\partial}R}}$은 감소(減少)하는 경향(傾向)이었으며, 전진속도(前進速度)가 증가(增加)함에 따라 감소율(減少率)은 증가(增加)되었다. 3. 평균경운소요(平均耕耘所要)토오크는 회전속도(回轉速度)가 320~360rpm에서 ${\frac{{\partial}T}{{\partial}R}}$의 變化가 적었으며, ${\frac{{\partial}T}{{\partial}R}}$은 회전속도(回轉速度)가 증가(增加)함에 따라 감소율(減少率)이 증가(增加)되었다. 4. 전진속도(前進速度)에 대(對)한 토양(土壤)의 단위체적당(單位體積當) 평균경운소요(平均耕耘所要)토오크의 변화율(變化率)${\frac{{\partial}T}{{\partial}R}}$는 270~300rpm에서 최저(最低)가 되었으며, ${\frac{{\partial}T}{{\partial}R}}$은 V=29.40cm/s와 V=46.93cm/s일때 변화율(變化率)이 280~290rpm에서 교착(交錯)하였다. 5. 로우터리날의 형상각(形狀角)이 증가(增加)함에 따라 순경운소요동력(純耕耘所要動力)은 증가(增加)하였다. 그러나 실제(實際) 이용면(利用面)에서는 형상각(形狀角)이 작으면 로우터리날에 검불이 감기게 되므로 소요동력(所要動力)이 크게 증가(增加)함을 보여주는 연구결과도 있다. 그러므로 형상각(形狀角) 변화(變化)에 대(對)해서는 계속 연구(硏究)되어야 할 과제(課題)라 인정(認定)된다.

  • PDF

재배방식에 따른 녹두 종실과 나물의 품질변화 (Comparison in Seed and Sprout Quality under Different Cropping Patterns in Mungbean)

  • 김동관;손동모;최진경;신해룡;천상욱;이경동;정기열;임요섭
    • 한국작물학회지
    • /
    • 제56권3호
    • /
    • pp.212-218
    • /
    • 2011
  • 본 연구는 남부지역에서 생력재배로 일시수확 및 관행재배로 생산한 녹두의 품질을 구명하고자 수행하였으며 결과는 다음과 같다. 생력재배는 7월 23일에 파종하여 10월 28일 일시에 수확하였고, 관행재배는 6월 13일에 파종하여 8월 중순부터 3차례 손으로 수확하였다. 1. 종실의 전분, 조단백질, vitexin 및 isovitexin 함량은 재배방식과 수확기에 따른 유의차가 없었다. 종실의 조지방 함량은 생력재배, 관행재배 3차, 2차, 1차 수확한 종실 순으로 많았다. 2. 종실의 포화지방산과 불포화지방산의 조성비는 재배방식 및 수확기에 따른 차이가 없었다. 지방산 종류는 관행재배로 2차 수확한 종실에서 17종으로 가장 많았고, 관행재배 3차나 생력재배로 일시에 수확한 종실은 12종으로 가장 적었다. 주요 포화지방산 중에서 palmitic acid와 arachidic acid는 관행재배 1차, 2차, 3차 및 생력재배 수확 순으로 높은 비율인 반면 stearic acid는 반대의 경향이었다. 주요 불포화지방산 중에서 linoleic acid는 관행재배 1차, 2차, 3차 수확 및 생력재배 순으로 조성 비율이 높았다. 3. 종실의 아밀로그램 특성은 재배방식 및 수확기에 따라 큰 차이를 나타냈다. 관행재배로 1차에 수확한 종실은 호화개시온도, 최고점도, 최종점도, 최저점도 및 강하점도가, 관행재배 3차에 수확한 종실은 치반점도가 유의하게 높았다. 반면에 생력재배로 수확된 종실은 모든 아밀로그램 측정값이 현저하게 낮았다. 4. 녹두나물을 생산하고 나물의 수율과 색도 및 아미노산 함량을 측정한 결과, 생력재배로 생산한 녹두는 나물의 생산수율이 낮으나 색도와 아미노산 함량은 관행재배로 수확한 종실을 이용하여 생산한 나물과 비슷하였다.

중공사 막을 이용한 감귤 과피 bioflavonoids 분리 및 식이 섬유 회수 공정 최적화 (Optimization of Separation Process of Bioflavonoids and Dietary Fibers from Tangerine Peels using Hollow Fiber Membrane)

  • 이은영;우건조
    • 한국식품과학회지
    • /
    • 제30권1호
    • /
    • pp.151-160
    • /
    • 1998
  • 감귤류의 가공 부산물인 감귤 과피 내에는 식이 섬유소 외에 미생물의 성장을 억제시키는 naringin과 혈압 저해 능력이 있는 hesperidin 등의 bioflavonoids가 다량 함유되어있지만, 대부분이 가공 과정 중 폐기되고 있다. 생리 활성 물질인 bioflavonoids를 회수하기 위하여 원료 투입 속도, 막 횡단 압력, 온도, pH등을 조절하여 최적 막 분리 조건을 구하였다. 감귤 과피에 7.5 배의 물을 첨가하여 균일하게 혼합한 후, 혼합 용액을 예비 여과 시스템에서 여과하였다. 예비 여과된 추출물은 중공사 막을 이용하여 한외 여과하였다. 원료 투입 속도와 flux간에는 일정한 상관 관계가 없었지만, 막 횡단 압력 8 psi 이상에서 pressure controlled region이 관찰되었다. $9^{\circ}C$에서 $25^{\circ}C$로 온도가 상승함에 따라 $10{\;}liters/m^2/hr{\;}(LMH)$씩 flux가 증가하였으나, $25^{\circ}C$에서 $33^{\circ}C$ 구간에서는 flux 증가폭이 2 LMH에 그쳤다. 모든 적용 막 횡단 압력에서 pH 4.8일 때의 flux가 가장 높았으며, pH 3.0에서의 flux가 pH 6.0, 7.0, 9.0 일 때 보다 훨씬 낮았다. 최적 운용 조건은 원료 투입 속도 49.3 L/hr, 막 횡단 압력 10psi,온도 $25^{\circ}C$, pH 4.8 이었다. 최적 분리 조건하에서 막 분리 하였을 때, 시간이 경과함에 따라 flux가 점차적으로 감소하여 약 1시간 50분 경과 후 정상 상태에 도달하였다. 각 분리 단계별로 retentate 단위 무게당 식이 섬유 함량과 permeate의 bioflavonoids농도를 측정하였다. 분리 단계별 retentate중 단위 무게당 총 식이 섬유와 수용성 식이 섬유 함량은 각각 170 mesh retentate와 prefiltered retentate에서 가장 높았다 한외 여과 permeate내의 naringin 과 hesperidin 농도는 각각 $0.45{\sim}0.65\;mg/g,\;5.15{\sim}6.86\;mg/g$으로, 감귤 과피 고유의 함량보다 각각 $15{\sim}22$배, $79{\sim}93$배 높은 수치였다. 따라서 , 감귤 과피로부터 bioflavonodsi를 회수하는데 있어서 PM10 중공사막의 운용이 매우 효과적인 분리 시스템임을 알 수 있었다.

  • PDF

전립선암 환자의 뼈 전이에 대한 $^{18}F$-Fluoride PET/CT의 유용성 (Usefulness of $^{18}F$-Fluoride PET/CT in Bone Metastasis of Prostate Cancer)

  • 박민수;김정열;박훈희;강천구;임한상;김재삼;이창호
    • 핵의학기술
    • /
    • 제13권3호
    • /
    • pp.24-30
    • /
    • 2009
  • 국내의 암 발생 변화 추이를 고려해보면, 현재 남성에게 발생하는 전립선암의 비중이 나날이 증가하고 있다. 전립선 암의 경우 림프절이나 뼈에 전이가 되면 90% 이상 사망에 이른다. 따라서 최근 핵의학 분야에서는 전립선 암의 뼈 전이를 보다 정확하게 진단하기 위해 여러 영상기법과 방사성 의약품의 개발이 진행, 소개되고 있다. 본 연구에서는 전립선 암세포의 뼈 전이에 대한 보다 정밀한 영상을 획득하여 진단능을 향상시키는 $^{18}F$-Fluoride PET/CT의 유용성을 알아보고자 한다. 본 연구는 총 33명의 전립선암으로 진단된 환자로서, 평균 $67.8{\pm}10.2$세의 남자를 대상으로 하였다. 동일한 환자에게 각각 전신 뼈 검사(Whole Body Bone Scan; WBBS)와 뼈 양전자 방출 컴퓨터 단층 촬영(18F-Fluoride Positron Emission Tomography/Computed Tomography; $^{18}F$-Fluoride PET/CT)을 시행하였으며, 각 검사에서 나타난 병변을 확인하여 ROC곡선(Receiver Operating Characteristic Curve)을 통해 AUROC (The Area Under an ROC)분석하였다. 또한 두 검사의 민감도와 특이도, 양성예측률과 음성예측률 그리고 두 검사의 정확도를 비교 분석하였다. 총 33명 중 22명의 환자(66.6%)에게서 뼈 전이가 있었으며, $^{18}F$-Fluoride PET/CT에서 모두 우수한 결과치가 나타났다. WBBS의 민감도는 63.6%, 특이도는 81.8%였고, $^{18}F$-Fluoride PET/CT에서는 민감도 100%, 특이도 90.9%로 나타났으며, AUROC를 비교한 결과 WBBS에서 0.778, $^{18}F$-Fluoride PET/CT는 0.942로 분석되었다. $^{18}F$-Fluoride PET/CT는 WBBS에 비하여 높은 민감도와 특이도를 보였으며, 3D 영상 구현으로 암세포의 뼈에 대한 전이성 병소를 더욱 정확하고 명확하게 발견할 수 있었다. 또한 WBBS의 장시간 검사에 비하여 $^{18}F$-Fluoride PET/CT는 상대적으로 단시간에 뼈의 생리적인 변화에 대한 정확한 영상을 얻을 수 있어 환자의 불편함을 최소화 할 수 있었다. 고가 검사비용에 대한 부담을 줄일 수 있다면 $^{18}F$-Fluoride PET/CT를 통해 더욱 정확한 영상을 제공하여 임상에서의 진단능을 향상 시킬 수 있을 것으로 사료된다.

  • PDF

만성폐쇄성폐질환 환자에서 기관지확장제 흡입에 대한 흡기환기지표의 반응 (Inspiratory Flow Rate for the Evaluation of Bronchodilator in Patients with COPD)

  • 백재중;박건욱;정연태
    • Tuberculosis and Respiratory Diseases
    • /
    • 제42권3호
    • /
    • pp.342-350
    • /
    • 1995
  • 연구배경: 만성폐쇄성폐질환 환자에서 기관지확장제 사용후 임상 증상의 호전을 보이는 경우에도 폐기능 검사상 $FEV_1$의 증가가 뚜렷하지 않은 경우가 종종 관찰된다. 이러한 현상은 만성폐쇄성폐질환 환자에서 $FEV_1$이 환기기능의 변화를 예민하게 반응하지 못하기 때문으로 알려져 있다. 만성폐쇄성폐질환 환자에서 기저 병태생리는 호기시 기도폐쇄이지만 결과적으로 흡기시 호흡시스템의 부하가 증가하는 것이다. 그러므로 기관지확장제로 인한 환기역학의 개선으로 임상 증상이 호전되는데 이는 흡기시 부하가 감소된 결과일 가능성이 있다. 이에 저자들은 기관지확장제에 대한 흡기시 환기역학의 반응을 보기 위한 연구를 시행하였다. 방법: 대상은 17명의 만성폐쇄성폐질환환자이며 이중 3명은 여자였고 14명은 남자였다. 나이는 45세에서 80세 사이였으며($65.5{\pm}9.4$세) 검사전 최근 2주사이에 급성악화의 병력이 없는 안정상태에 있었다. 먼저 안정상태에서 호기와 흡기의 노력성유량-기량곡선(Forced F1ow-volume Curve)을 측정한 후 salbutamol($Ventolin^{(R)}$) 용액 10mg을 jet nebulizer($Devilbiss^{(R)}$ model 646)를 이용하여 4분간 흡입후 15분 뒤 다시 각각 호기와 흡기의 노력성유량-기량곡선을 측정하였다. 결과: 17명 환자의 기관지확장제 홉입전 $FEV_1$$0.92{\pm}0.34L$($38.3{\pm}14.9%$), FVC는 $2.25{\pm}0.81L$($71.1{\pm}21.0%$), $FEV_1$/FVC%는 $43.1{\pm}14.5%$였다. 기관지확장제 흡입후 $FEV_1$, FVC, Peak Inspiratory Flow(PIF)의 증가는 각각 $0.15{\pm}0.13L$, $0.58{\pm}0.38L$, $1.0{\pm}0.56L/sec$ 였으며, 초기값에 대한 변화율은 각각 $17.0{\pm}14.3%$, $29.0{\pm}22.5%$, $37.5{\pm}16.7%$ 였다. PIF의 증가는 $FEV_1$ 증가의 2배이상 되었으며(p<0.001), 기관지 확장제 흡입후 $FEV_1$의 증가가 거의 없었던 3례에서도 PIF의 증가는 각각 35.0%, 44.0%, 55.2% 였다. 결론: 만성폐쇄성폐질환 환자에서 기관지확장제에 의한 환기역학의 호전은 호기의 지표보다 흡기의 지표가 더 예민하게 반영하는 것으로 보인다.

  • PDF

배수개선공법개발에 관한 연구(I) -각종 지하배수용 암거재료의 배수성능- (Drainage Performance of Various Subsurface Drain Materials-)

  • 김철회;이근후;유시조;서원명
    • 한국농공학회지
    • /
    • 제21권3호
    • /
    • pp.104-120
    • /
    • 1979
  • I. Title of the Study Studies on the Development of Improved Subsurface Drainage Methods. -Drainage Performance of Various Subsurface Drain Materials- II. Object of the Study Studies were carried out to select the drain material having the highest performance of drainage; And to develop the water budget model which is necessary for the planning of the drainage project and the establishment of water management standards in the water-logged paddy field. III. Content and Scope of the Study 1. The experiment was carried out in the laboratory by using a sand tank model. The drainage performance of various drain materials was compared evaluated. 2. A water budget model was established. Various parameters necessary for the model were investigated by analyzing existing data and measured data from the experimental field. The adaptability of the model was evaluated by comparing the estimated values to the field data. IV. Results and Recommendations 1. A corrugated tube enveloped with gravel or mat showed the highest drainage performance among the eight materials submmitted for the experiment. 2. The drainage performance of the long cement tile(50 cm long) was higher than that of the short cement tile(25 cm long). 3. Rice bran was superior to gravel in its' drain performance. 4. No difference was shown between a grave envelope and a P.V.C. wool mat in their performance of drainage. Continues investigation is needed to clarify the envelope performance. 5. All the results described above were obtained from the laboratory tests. A field test is recommended to confirm the results obtained. 6. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as follows; $$D=\Sigma\limit_{t=1}^{n}(Et-R_{\ell}-I+W_d)..........(17)$$ 7. Among the various empirical formulae for potential evapotranspiration, Penman's formular was best fit to the data observed with the evaporation pans in Jinju area. High degree of positive correlation between Penman;s predicted data and observed data was confirmed. The regression equation was Y=1.4X-22.86, where Y represents evaporation rate from small pan, in mm/100 days, and X represents potential evapotranspiration rate estimated by Penman's formular. The coefficient of correlation was r=0.94.** 8. To estimate evapotranspiration in the field, the consumptive use coefficient, Kc, was introduced. Kc was defined by the function of the characteristics of the crop soil as follows; $Kc=Kco{\cdot}Ka+Ks..........(20)$ where, Kco, Ka ans Ks represents the crop coefficient, the soil moisture coefficient, and the correction coefficient, respectively. The value of Kco and Ka was obtained from the Fig.16 and the Fig.17, respectively. And, if $Kco{\cdot}Ka{\geq}1.0,$ then Ks=0, otherwise, Ks value was estimated by using the relation; $Ks=1-Kco{\cdot}Ka$. 9. Into type formular, $r_t=\frac{R_{24}}{24}(\frac{b}{\sqrt{t}+a})$, was the best fit one to estimate the probable rainfall intensity when daily rainfall and rainfall durations are given as input data, The coefficient a and b are shown on the Table 16. 10. Japanese type formular, $I_t=\frac{b}{\sqrt{t}+a}$, was the best fit one to estimate the probable rainfall intensity when the rainfall duration only was given. The coefficient a and b are shown on the Table 17. 11. Effective rainfall, Re, was estimated by using following relationships; Re=D, if $R-D\geq}0$, otherwise, Re=R. 12. The difference of rainfall amount from soil moisture depletion was considered as the amount of drainage required. In this case, when Wd=O, Equation 24 was used, otherwise two to three days of lag time was considered and correction was made by use of storage coefficient. 13. To evaluate the model, measured data and estimated data was compared, and relative error was computed. 5.5 percent The relative error was 5.5 percent. 14. By considering the water budget in Jinju area, it was shown that the evaporation amount was greater than the rainfall during period of October to March in next year. This was the behind reasonning that the improvement of surface drainage system is needed in Jinju area.

  • PDF

환자분류에 의한 일개 2차 의료기관의 간호업무량 조사;전산화를 위한 기초작업으로서 (Measurement of the Nursing Workload by Patient Classification System in a Secondary Hospital;As a Preliminary Step for Computerization of Nursing Staffing and Scheduling)

  • 박정호;조현;박현애;한혜라
    • 간호행정학회지
    • /
    • 제1권1호
    • /
    • pp.132-146
    • /
    • 1995
  • Even though Korean medical law stipulates that number of patients attended by a nurse is 2.5 for hospitalization and 30 for ambulatory care, the number of patients cared by a nurse per day is much greater than the standard prescribed by the medical law. Current productivity of nurses is not desirable unless the quality of care is considered. And nursing manpower staffing based on neither current nurses' productivity nor standard of medical law cannot respond properly to dynamic situation of the medical services. Under this background, the necessity of more efficient management of nursing manpower occupying 1/3 of total hospital workers has been recognized by many nursing administrators. Many nursing researchers have studied to foretell the nursing manpower objectively on the basis of measured nursing workload according to patient classification as well. Most of These researches, however, have been conducted in the tertiary hospitals, so it is imperative to conduct other researches to predict necessary nursing manpower in the secondary and the primary hospitals. The study was performed to measure nursing workload and predict pertinent nursing manpower to a secondary hospital with 400beds. Nursing workload was surveyed using measuring tool for direct and indirect care hours in a surgical unit and a medical unit. Survey was conducted from Sep.10 to Sep.16 and from Oct.5 to Oct.11, 1994 respectively by two skilled nurses, Subjects were patients, patients' family members and nursing personnels. Results are follows : 1. Patient classification distributed as 22% of class I (mildly ill patient), 57% of class II (moderately ill patient), and 21% of class III (acutely ill patient) in the medical nursing unit, while 23% of class I, 29% of class II, 12% of class III, and 36% of classIV (critically ill patient) in the surgical nursing unit. There was no difference of inpatient number between weekday and weekend. Bed circulation rate was 89% in both units and average patients number per day was 37.4 (total 42beds) in the medical nursing unit, 32.9 (total 37beds) in the medical nursing unit. 2. Direct care hours per day measured as 2.8hrs for class I, 3.3hrs for class II, and 3.5hrs for class III in the medical nursing unit, while 3.1hrs for class I, 3hrs for class II, 2.7hrs for class III, and 2.2hrs for classIV in the surgical nursing unit. Meanwhile, hours for nursing assistant activities per patient by patients' family members were 11mins and 200mins respectively. Direct care hour rate by shift was day 36%, evening 25%, and night 39% in the medical nursing unit, while 40%, 29%, and and 31% respectively in the surgical nursing unit. 3. Measurement and observation activity held 44.2% of direct care activities of nurses and medication 36.7%, communication 11.7%, exercise 1.8%, treatment 1.3%, hygiene 1.3%, elimination and irrigation 1.1%, suction 1%, nutrition 0.5%, thermotherapy 0.3%, oxygen therapy 0.1% in order. 4. Indirect care hours per day were 294.2mins in the medical nursing unit, and 273.9mins in the surgical nursing unit. By shift, evening was the highest in both units. Indirect care hours for each patient were 44.5mins in the medical nursing unit and 46mins in the surgical nursing unit. 5. checking activities including doctor's order, medication, and delivering patients to the next shift occupied 39.7% of indirect care activities, and preparation 26%, recording 23.8%, communication and conference 6.7%, managing equipments 2.1%, messenger activity 1.7% in order. 6. On the ground of these results, nursing manpower needed in a secondary hospital was estimated ; 27 nursing personnels for the medical nursing unit of 37beds, and 20 nursing personnels for the surgical nursing unit of 33beds.

  • PDF

PET-CT 검사에서 방사선 종사자 피폭선량 저감에 대한 방안 연구 (A Study of Decrease Exposure Dose for the Radiotechnologist in PET/CT)

  • 김빛나;조석원;이주영;유광열;박훈희
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제38권1호
    • /
    • pp.23-30
    • /
    • 2015
  • 양전자 방출핵종은 511 keV의 감마선을 방출하기 때문에 기존 140 keV의 99mTc에 비해 종사자의 방사선 피폭의 증가로 피폭선량 저감을 위한 노력이 요구된다. 본 연구는 환자에게로부터 일정거리에 따른 선량률 변화를 확인하고 차폐를 이용하여 외부선량률의 변화를 알아보았으며 환자 주변의 외부선량 분포에 대한 영 향을 분석하여 방사선 종사자의 피폭 관리에 도움이 되고자 하였다. 10 명의 환자를 대상으로 하였으며 평균연령은 $47.7{\pm}6.6$ 세였다. 환자의 키는 평균 $165.5{\pm}3.8cm$, 몸 무게 평균은 $65.9{\pm}1.4kg$으로 비슷한 몸무게의 환자를 대상으로 하였다. 머리, 가슴, 복부, 무릎, 발끝 쪽의 위치에서 10 cm, 50 cm, 100 cm, 150 cm, 200 cm 위치에서 측정하였고 측정 후에 즉시 이동형 방사선 차폐체을 설치한 후 머리와 가슴, 복부 부분에서 100 cm, 150 cm, 200 cm 거리에서 선량률을 측정하였다. 거리에 따른 선량률 변화와 차폐 전, 후의 투과율을 구하였다. 평균 10 cm 거리에서는 머리 부분이 $105.40{\mu}Sv/h$로 가장 높게 나타났으며 발 부분에서 $15.85{\mu}Sv/h$로 가장 낮게 나타났다. 200 cm 거리에서는 머리, 가슴, 복부 부분에서 비슷한 선량률이 나타났다. 머리 부분에 서 차폐 전 100 cm에서 $9.56{\mu}Sv/h$, 150 cm에서 $5.23{\mu}Sv/h$, 200 cm에서 $3.40{\mu}Sv/h$로 나타났으며 차폐 후에는 100 cm, 150 cm, 200 cm 에서 각각 $2.24{\mu}Sv/h$, $1.67{\mu}Sv/h$, $1.27{\mu}Sv/h$로 측정되었다. 가슴 부분에 서 차폐 전 100 cm에서 $8.54{\mu}Sv/h$, 150 cm에서 $4.90{\mu}Sv/h$, 200 cm에서 $3.44{\mu}Sv/h$로 나타났으며 차폐 후에는 100 cm, 150 cm, 200 cm 에서 각각 $2.27{\mu}Sv/h$, $1.34{\mu}Sv/h$, $1.13{\mu}Sv/h$로 측정되었다. 복부 부분에 서 차폐 전 100 cm에서 $9.83{\mu}Sv/h$, 150 cm에서 $5.15{\mu}Sv/h$, 200 cm에서 $3.18{\mu}Sv/h$로 나타났으며 차폐 후에는 100 cm, 150 cm, 200 cm 에서 각각 $2.60{\mu}Sv/h$, $1.75{\mu}Sv/h$, $1.23{\mu}Sv/h$로 측정되었다. 투과율은 거리에 따라 증가함을 알 수 있었다. 거리가 멀어질수록 선량율이 낮아지는 것을 확인할 수 있었으며 차폐를 하였을 경우 차폐를 하지 않았을 때보다 1 / 4 정도 더 낮아지는 것을 확인할 수 있었다. 검사를 진행하는 근무자는 환자와의 거리를 멀리 할 수 없기 때문에 방사선 피폭이 증가할 수밖에 없다. 따라서 적절한 차폐를 한다면 방사선 종사자의 방사선 피폭을 줄 일 수 있을 것이다.

NEMA NU2-2001을 이용한 Siemens CTI ECAT EXACT 47 스캐너의 표준 성능 평가 (Performance Evaluation of Siemens CTI ECAT EXACT 47 Scanner Using NEMA NU2-2001)

  • 김진수;이재성;이동수;정준기;이명철
    • 대한핵의학회지
    • /
    • 제38권3호
    • /
    • pp.259-267
    • /
    • 2004
  • 목적: 전신용 PET에 대한 표준 성능 평가 방법으로 NEMA NU2-2001이 확립되어 제안되었다. 따라서 새로이 설치되는 PET 스캐너뿐 아니라 기존에 사용 중인 스캐너에 대한 성능 평가가 이 표준 방법에 따라서 새로이 이루어 져야 한다. 이 연구에서는 NEMA NU2-2001 방법을 이용하여 CTI ECAT EXACT 47 PET 스캐너의 공간해상도, 민감도, 산란분획, NECR 등을 측정하였다. 대상 및 방법: 공간해상도를 평가하기 위하여 축 방향 시야의 정 가운데와 축 방향 시야 길이의 1/4을 벗어난 횡단면에 F-10을 채운 유리관(내경 1.1 mm)을 횡단면의 중심에서 1, 10 cm 떨어진 지점에 축 방향과 평행하게 위치시킨 후 PET 영상을 얻었다. 민감도를 측정하기 위하여 폴리에틸렌 및 알루미늄 관에 F-18을 채운 후 불응시간 손실이 1%를 넘지 않는 것을 확인한 후 영상을 획득하였다. 산란분획 및 최적 영상 획득 조건을 얻기 위하여 NECR을 NEMA 산란 팬텀을 이용하여 측정하였다. 결과: FBP재구성 방법(화소 크기: $0.515{\times}0.515mm^2$)으로 영상을 재 구성했을 때 스캐너의 중심에서 1cm 벗어난 지점에서 축방향, 횡축방향 공간 분해능은 0.62, 0.66 cm (FBP, 2D와 3D), 0.67, 0.69 cm (FBP, 2D와 3D)이었고 중심에서 10 cm 벗어난 지점에서 축방향, 횡축반경방향, 횡축접선방향 공간 분해능은 0.72, 0.68 mm (FBP, 2D와 3D), 0.63, 0.66 mm (FBP, 2D와 3D), 0.72, 0.66 mm (FBP, 2D와 3D)이었다. 민감도는 스캐너의 횡축방향 708.6 (2D), 2931.3 (3D) counts/sec/MBq, 횡축방향 중심에서 10cm 벗어난 지점에서 728.7 (2D), 3398.2 (3D) counts/sec/MBq 이었다. 산란 분획은 0.19 (2D), 0.49 (3D)이었고 최고 참 계수율과 NECR은 2차원 영상 획득 모드에서 40.1 kBq/mL 일 때 64.0 kcps, 40.1 kBq/mL 일 때 49.6 kcps, 3차원 영상 획득 모드에서 4.76 kBq/mL 일 때 53.7 kcps, 4.47 kBq/mL 일 때 26.4 kcps이었다. 결론: 이 실험에서 NEMA NU2-2001로 측정한 PET스캐너의 물리적 특성은 PET스캐너에 대한 객관적 평가 및 최적화 된 영상 획득과 분석에 유용할 것이다.

생물개스 발생시스템을 위한 지하매설콘크리트 다이제스터의 열전달에 관한 연구 (Study on the Heat Transfer Phenomenon around Underground Concrete Digesters for Bigas Production Systems)

  • 김윤기;고재균
    • 한국농공학회지
    • /
    • 제22권1호
    • /
    • pp.53-66
    • /
    • 1980
  • The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

  • PDF