• Archives of Plastic Surgery
• /
• 제33권2호
• /
• pp.255-258
• /
• 2006

Nasions are flat and located more caudally in Asian than in Caucasian. Implant insertions in rhinoplasties are apt to move nasions more cephallic, which can cause unsatisfactory results in Asian. The purpose of this study is introducing a simple technique in rhinoplasty avoiding unnatural nasion in augmentation rhinoplasty in Asian patients. Multiple radiating incisions were made at nasion level on inner side of silicone implant to fit it into the curvature around the nasion. Between October 2001 and October 2003, 27 patients underwent augmentation rhinoplasties using this technique and results were evaluated. Preoperative and postoperative photographs of patients were used to measure the levels of nasion from medial canthus. The mean nasion level from medial canthus of preopertive patients were $3.46{\pm}0.87mm$ and postoprative patient was $4.98{\pm}0.96mm$. The mean difference between preoperative nasion level and postoperative nasion level was 1.52 mm. There was no complication such as extrusion, displacement or infection. This technique of radiating incisions on inner side of the silicon implant can minimize cephalic migration of the nasion level in augmentation rhinoplasty in Asian.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.2575-2580
• /
• 2013

본 논문에서는 RE엔진에 적용하기위한 흡기포트를 CFD 기술을 활용하여 개발하였다. 3차원 모델링을 진행하고 전산유체해석을 진행하였으며, 계산된 유량계수와 스월계수를 실험결과와 비교 분석하였다. 흡기포트의 convex 및 concave부 곡률을 최적화하여 Recirculation의 발생과 유동저항을 저감하였다. 결과적으로, 계산된 평균 유량계수는 0.383이고, 평균 스월수는 1.544로 일반적인 2밸브 엔진 시스템의 평균성능에 상회하는 우수한 성능을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.59-62
• /
• 1999

Inception and propagation of electrical tree and properties of Partial discharge(PD) pulses accompanying with tree as a function of needle tip radius in low density polyethylene were discussed. To study on these characteristics in different tip radius, we used specimens with needle-plane electrode system made of LDPE, observed inception and propagation of electrical tree by optical microscope with computer and investigated the characteristics of the phase resolved PD pulses accompanying with propagation of electrical tree. The PD quantities detected and analysed were PD magnitude, mean phase angle, average discharge, and the statistical characteristics of the PD pulses. As the tip radius ${\gamma}$ increases, tree inception stress E$\sub$i/ converges to constance value. This result suggests that tree inception stress E$\sub$i/ increases due to stress relaxation when the tip radius is small. Branch-type electrical tree was formed When E$\sub$i/ is 640-750[kV/mm]. bush-type electrical tree when E$\sub$i/ is 370∼400[kV/mm], branch-like electrical tree when E$\sub$i/ is 370-400[kV/mm].

• Journal of Gastric Cancer
• /
• 제10권3호
• /
• pp.133-136
• /
• 2010

Purpose: The aim of this study was to evaluate the effectiveness of our retraction method for achieving a good operative field for the adequate lymph node dissection during laparoscopic gastrectomy in view of short term surgical outcome. Materials and Methods: This study prospectively enrolled 19 patients who underwent laparoscopic gastrectomy for early gastric cancer. The procedure was simply performed by putting the laparoscopic sigle suture in the phrenoesophageal ligament, and then the string was pulling and tying over the sternum. Surgical outcomes of these patients were evaluated. Results: Under V-shaped liver retraction, the mean operating time and mean number of retrieved lymph nodes was 166.3 minute and 31.37, respectively. And the results were satisfactory compared to open or conventional laparoscopic gastric surgery. Conclusions: V-shaped liver retraction requires no extra port or assistant's hands, and prevents additional injury to any intra-abdominal organ. And this method can easily, efficiently and safely enable to achieve a good operative field for the lymph node dissection near the lesser curvature of the stomach.

• 로봇학회논문지
• /
• 제12권1호
• /
• pp.26-32
• /
• 2017

Previous shape sensors including bend sensors and optic fiber based sensors are widely used in various applications including goniometer and surgical robots. But theses sensors have large nonlinearity, limited in the range of sensing curvature, and sometimes are expensive. This study suggests a new concept of bend sensor using cable-conduit which consists of the outer sheath and the inner wire. The outer sheath is made of helical coil whose length of the central line changes as the sheath bends. This length change of the central line can be measured with the length change of the inner cable. The modeling and the experimental results show that the output signal of the proposed sensor is linearly related with the bend angle of the sheath with root mean square error of 5.3% of $450^{\circ}$ sensing range. Also the polynomial calibration of the sensor can decrease the root mean square error to 2.1% of the full sensing range.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.805-814
• /
• 2008

This study focused on the resilient modulus prediction model, which is the functions of mean effective principal stress and axial strain, for three types of railroad trackbed materials such as crushed stone, weathered soil, and crushed-rock soil mixture. The model is composed with the maximum Young's modulus and nonlinear values for higher strain in parallel with dynamic shear modulus. The maximum values is modeled by model parameters, $A_E$ and the power of mean effective principal stress, $n_E$. The nonlinear portion is represented by modified hyperbolic model, with the model parameters of reference strain, ${\varepsilon}_r$ and curvature coefficient, a. To assess the performance of the prediction models proposed herein, the elastic response of a test trackbed near PyeongTaek, Korea was evaluated using a 3-D nonlinear elastic computer program (GEOTRACK) and compared with measured elastic vertical displacement during the passages of freight and passenger trains. The material types of sub-ballasts are crushed stone and weathered granite soil, respectively. The calculated vertical displacements within the sub-ballasts are within the order of 0.6mm, and agree well with measured values with the reasonable margin. The prediction models are thus concluded to work properly in the preliminary investigation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2579-2584
• /
• 2007

A digital micro holographic particle tracking velocimetry (HPTV) system consisting of a high-speed camera and a single laser with acoustic optical modulator (AOM) chopper was established. The digital micro HPTV system was applied to water flow in a micro curved-tube for measuring instantaneous 3-D velocity field data consecutively. The micro curved-tube is using to reproduce the dorsal aorta or utilize in various lap-on-a-chip. The temporal evolution of a three-dimensional water flow in the micro curved-tube (the curvature, ${\kappa}$=1/${\phi}$, 2/${\phi}$, 4/${\phi}$, 8/${\phi}$) of 100 ${\mu}m$ and 300 ${\mu}m$ inner diameters was obtained and mean velocity field distribution was obtained by statistical-averaging the instantaneous velocity fields.

• 호남수학학술지
• /
• 제39권3호
• /
• pp.363-377
• /
• 2017

In the present study we consider the generalized rotational surfaces in Euclidean spaces. Firstly, we consider generalized spherical curves in Euclidean (n + 1)-space ${\mathbb{E}}^{n+1}$. Further, we introduce some kind of generalized spherical surfaces in Euclidean spaces ${\mathbb{E}}^3$ and ${\mathbb{E}}^4$ respectively. We have shown that the generalized spherical surfaces of first kind in ${\mathbb{E}}^4$ are known as rotational surfaces, and the second kind generalized spherical surfaces are known as meridian surfaces in ${\mathbb{E}}^4$. We have also calculated the Gaussian, normal and mean curvatures of these kind of surfaces. Finally, we give some examples.

• Wind and Structures
• /
• 제9권6호
• /
• pp.419-440
• /
• 2006

This article synthesizes the literature on the meteorology, experimental simulation, and wind engineering ramifications of intense downburst outflows. A novel design of a large-scale test facility and experimental evidence of its validity are presented. A two-dimensional slot jet is used to simulate only the outflow region of a downburst. Profiles of mean velocity and turbulence quantities are acquired using hot-wire anemometry. Comparison with the literature provides empirical evidence that supports the current approach. A geometric analysis considers the validity of applying a two-dimensional approximation for downburst wind loading of structures. This analysis is applicable to power transmission lines in particular. The slot jet concept can be implemented in a large boundary layer wind tunnel to enable large-scale laboratory experiments of thunderstorm wind loads on structures.

• Korean Journal of Mathematics
• /
• 제25권4호
• /
• pp.555-561
• /
• 2017

We show that a closed curve invariant under inversions with respect to two intersecting circles intersecting at angle of an irrational multiple of $2{\pi}$ is a circle. This generalizes the well known fact that a closed curve symmetric about two lines intersecting at angle of an irrational multiple of $2{\pi}$ is a circle. We use the result to give a different proof of that a compact embedded cmc surface in ${\mathbb{R}}^3$ is a sphere. Finally we show that a closed embedded cmc surface which is invariant under the spherical reflections about two spheres, which intersect at an angle that is an irrational multiple of $2{\pi}$, is a sphere.