• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.863-866
• /
• 1998

In this paper two quick boosting charge pump circuits for high-speed EEPROM memory are proposed. In order to improve initial charge transfer efficiency, one uses weighted capacitors where each stage has different clock coupling capacitance, and the other uses a multi-path structure at the first stage. SPICE simulation results show that these charge pumps have improve drising-time characteristics, but their $V_{DD}$ mean currents are increased a little compared with conventioanl charge pumps. The rising time upt o 15V of the proposed charge pumps is 3 times faster than that of dickson's pump at the cost of 1.5 tiems more $V_{DD}$ mean current.rrent.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.133-142
• /
• 2014

The least mean square(LMS) algorithm has been popular owing to its simplicity, stability, and availability to implement. But it inherently has a problem of slow convergence speed, and the presence of a transfer function in the secondary path following the adaptive controller and the error path has been shown to generally degrade the stability and the performance of the LMS algorithm in applications of acoustical noise control. In general, in order to solve these problems, the filtered-x LMS (FX-LMS) type algorithms can be used and the bi-directional Filtered-x LMS(BFXLMS) algorithm is very attractive among them, which increase the convergence speed and the performance of the controller with nearly equivalent computation complexity. In this paper, a mathematical analysis for the BFXLMS algorithm is presented. In terms of view points of time domain, frequency domain, and stochastic domain, the characteristics and stabilities of algorithm is accurately analyzed.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.2
• /
• pp.171-180
• /
• 1995

Recently vascularized fibular transfer has been used in the treatment of bone tumor that are more than six centimeter in length. With refinements in microsurgical techniques and understanding of the biological and biomechanical characteristics of vascularized bone graft, the success rate of this procedure was increased. Fifteen bone tumor patients, sixteen cases seen from Apr. 1979 to Jun. 1995 were managed by means of vascularized bone graft at Kyung Hee University Hospital. Ten cases were done intercalary graft and the others were done osteoarticular graft. the ratio of male and female was 6 : 9, and mean age was 20.4 years old at operation. Mean follow up period was 5 years 4 months(range 17 months to 16 years 2 months) and mean graft length was 13.8cm. Duration for union was 5.3 months(range 3 months to 1 year) and over-all rate of union at the last follow up examination was 93.8%. Sufficient hypertrophy of grafted bone was obtained in all cases at the time of last follow up as compared to initial size of grafted bone. Several complications were found such as stress fractures, recurrence. Vascularized fibular transfer for the treatment of bone tumor is a valuable procedure in appropriately selected patients.

• Journal of Embryo Transfer
• /
• v.17 no.3
• /
• pp.239-249
• /
• 2002

Embryos derived from pig oocytes matured in mSOF are able to develop to blastocysts after IVF. Experiment 1 evaluated the effects of two maturation media (TCM-199 vs mSOF) on maturation rate, fertilization parameters, including penetration, polyspermy, male pronuclear formation, and the mean number of sperm penetrated per oocyte. Experiment 2 and Experiments 3 examined the effects of two maturation media on zona pellucida solubility and cortical granule distribution by transmissible electron microscopy, respectively. Experiment 4 assessed the effects of two maturation media on the in vitro embryo cleavage rate and development to blastocyst. Lastly, experiment 5 examined the cell number of blastocyst. An effect of media (P<0.05) was detected for mSOF on the mean number of sperm per oocyte. In TCM group, zona digestion time (196.5$\pm$15.5 vs 131.6$\pm$20.1 before IVF, 397.5$\pm$30.3s vs 185.3$\pm$16.4s after IVF, p<0.05) was higher in TCM-199 group. No significant effects of media was observed on cortical granule distribution between two groups by TEM. An effect (P<0.05) was observed on embryo development to blastocyst (16% vs 8%) but not on cleavage rates. No significant effects of media was observed on total cell number of blastocyst. We found that the high mean number of sperm penetrated per oocyte and the weaker zona pellucida on the basis of the digestion time was shown in pig oocytes matured in mSOF, however, porcine oocyte maturation with supplemented synthetic oviduct fluid medium (mSOF) resulted in blastocyst cell numbers comparable to those observed with Tissue Culture Medium 199.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.95-101
• /
• 1998

Waveforms of $CO_2$ gas shielded arc welding in short circuit transfer mode was studied with the waveform analysis program, which can calculate various waveform factors such as number of short circuit event, mean and standard deviation of short circuit time and arc time. The calculated values of these factors were correlated independently or in combination with the spatter generation rate to figure out the most reliable index for evaluating spatter generation and further for arc stability. As a result this study, it was confirmed that the spatter generation tends to decrease with the increase of short circuit frequency. Further to this, it was also found that as the short circuit frequency increases the short circuit event becomes more uniform resulting in the decrease of standard deviations ($\sigma$values) of short circuit time and arc time. This result demonstrated that these factors are strongly correlated with each other and thus any one of these factors can be used for the evaluation index. In the discussion, however, short circuit frequency was proposed for the most practical index in evaluating the arc stability of short circuit transfer mode since it is the one which could be monitored in-process condition without any complex caculation process.

• Journal of the korean society of oceanography
• /
• v.38 no.3
• /
• pp.135-142
• /
• 2003

Gas flux across the air-sea interface is often determined by the product of gas transfer velocity k) and the difference of concentrations in water and air. k is primarily controlled by wind stress on the air-sea interface, thus all parameterizations ofk involve wind speed, a rough indicator of wind stress, as one of the independent variables. We attempted to explore the spatial and temporal variations of k in the East (Japan) Sea using a database from Naet al. (1992). Three different parameterizations were employed: those of Liss and Merlivat (1986), Wanninkhof(1992), and Wanninkhofand McGillis (1999). The strong non-linear dependence of k on wind speed in all parameterizations leads us to examine the effect of time resolution, in which the binned wind speeds are averaged, on the estimation ofk. Two time resolutions of 12 hours (short-term) and one month (long-term) were chosen. The mean wind speeds were fed into the given parameterizations, resulting in six different transfer velocities of $CO_2$ ranging from 12 to 32 cm/h. In addition to the threefold difference depending on the choice of parameterization, the long-term average of wind speed results in a value ofk up to 20% higher than the short-term (12 hours) average of wind speed due to the non-Rayleigh wind distribution in the East (Japan) Sea. While it is not known which parameterization is more reliable, this study proposes that the time-averaged wind speed should not be used in areas where non-Ralyleigh wind distribution prevails such as the East (Japan) Sea. The net annual $CO_2$ flux was estimated using the value of k described above and the monthly ${\Delta}fCO_2$ of Oh et al. (1999); this ranges from 0.034 to 0.11 Gt-C/yr.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.113-116
• /
• 2008

This work presents numerical optimization for design of staggered arrays of dimples printed on opposite surfaces of a cooling channel with a fast and elitist Non-Dominated Sorting of Genetic Algorithm (NSGA-II) of multi-objective optimization. As Pareto optimal front produces a set of optimal solutions, the trends of objective functions with design variables are predicted by hybrid multi-objective evolutionary algorithm. The problem is defined by three non-dimensional geometric design variables composed of dimpled channel height, dimple print diameter, dimple spacing and dimple depth to maximize heat transfer rate compromising with pressure drop. Twenty designs generated by Latin hypercube sampling were evaluated by Reynolds-averaged Navier-Stokes solver and the evaluated objectives were used to construct Pareto optimal front through hybrid multi-objective evolutionary algorithm. The optimum designs were grouped by k-mean clustering technique and some of the clustered points were evaluated by flow analysis. With increase in dimple depth, heat transfer rate increases and at the same time pressure drop also increases, while opposite behavior is obtained for the dimple spacing. The heat transfer performance is related to the vertical motion of the flow and the reattachment length in the dimple.

• Earthquakes and Structures
• /
• v.13 no.1
• /
• pp.79-87
• /
• 2017

Seismic analysis of local site conditions is fundamental for a reliable site seismic hazard assessment. It plays a major role in mitigation of seismic damage potential through the prediction of surface ground motion in terms of amplitude, frequency content and duration. Such analysis requires the determination of the transfer function, which is a simple tool for characterizing a soil profile by estimating its vibration frequencies and its amplification potential. In this study, numerical simulations are carried out and are then combined with a statistical study to allow the characterization of design sites classified by the Algerian Building Seismic Code (RPA99, ver 2003), by average transfer functions. The mean transfer functions are thereafter used to compute RPA99 average site factors. In this regard, coming up seismic fields are simulated based on Power Spectral Density Functions (PSDF) defined at the rock basement. Results are also used to compute average site factor where, actual and synthetic time histories are introduced. In absence of measurement data, it is found that the proposed approach can be used for a better soil characterization.

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.291-300
• /
• 1996

Real time B-mode ultrasound was used to detect the early conceptus in 187 Korean native cattles between days 10 and 60 after last insemination. The ultrasound diagnostic findings were systemically confirmed by palpation per rectum after the 60th day of last insemination. The embryonic vesicle and the embryo proper within the veside were first visible on mean day fl and 23, respectively. The heartbeat of the embryo proper could be detected on day 26, and the limb buds, placentomes, amnion, fetal movement, umbilical cord, optic area and split hooves were first visible on day 33, 34, 34, 44.5, 45, 32 and 48, respectively. The mean length of embryo proper was 3.8mm on day 23 which later increased to 56. 6rnrn on day 60. When ultrasound was used to detect the conceptus between days 20 and 30 after insemination and palpation per rectum after the 60th day of insemination, the accuracy rates of pregnancy detection by ultrasound scanning at days 20, 22, 24, 26, 28, 30 were 44.4, 69.2, 78.6, 87.5, 90.0, 93.3%. In summary, the early pregnancy diagnosis of Korean native cattle with ultrasound appears high accuracy rates. It is considered that ultrasound can be used in veterinary practice well.

• The Korean Journal of Emergency Medical Services
• /
• v.15 no.2
• /
• pp.55-66
• /
• 2011

Purpose: The purpose of this study was to develop a scenario and evaluate the performance of paramedic students in head trauma simulation education. Method: This study selected a refined head trauma scenario that was developed by graduate students during class from september to November, 2010. Evaluation on implementation of head trauma simulation was conducted on seventeen paramedic students divided into four groups during November, 2010. Results: 1. The head trauma scenario was developed according to the patient assessment for approximately 10 minutes. It contained scene size-up, initial assessment and intervention, rapid trauma assessment and intervention, and decision of transfer. 2. The average time turned out to be 9 min and 36 sec after simulation learning. Total mean score in simulation performance was 2.20, the highest score was 2.44 in initial assessment and intervention, and the lowest score was 1.5 in decision of transfer. 3. Confidence mean was high with the score of 1.0. Conclusion: The finding of this study demonstrate that the simulation education can improve problem-solving ability and critical thinking, and increase the confidence in prehospital emergency care; therefore, simulation may be the new effective paramedic education strategy and simulation learning is needed for further development of various scenarios.