• 응용통계연구
• /
• 제19권2호
• /
• pp.283-290
• /
• 2006

일반적으로 Box-Cox변환과 같은 류의 멱변환은 분산 안정화 혹은 분포의 대칭성 향상 등을 목적으로 사용된다. 그러나 원 자료의 평균의 크기가 크면서 분산이 상대 적으로 작은 경우, 즉 변동계수가 작은 경우에는 제대로 작동하지 않는 것이 알려져 있다. 본 논문에서는 이러한 문제점을 해결하기 위한 이동-멱변환을 제안하고 모의실험과 실제 자료 분석을 통하여 그 효과를 확인하였다.

• 대한인간공학회지
• /
• 제27권3호
• /
• pp.71-79
• /
• 2008

Walking shoes for walking and jogging have been used to enjoy lots of leisure time. Functional shoes such as walking shoes have special functions to improve body motility by changing of shoe shapes. The walking shoes could improve the motility by structural transformation of outsole as increase degrees of heel and toe. The study on insoles has not been conducted enough on the contrary of the study of outsole. The purpose of this study is to perform ergonomics analysis whether the Arch Supported insoles have an improving effect of muscle activities or not. Experiments were performed with 6 subjects who are health and haven't experienced any diseases past. EMG(Electromyography) and Foot Pressures were measured repeatedly for 5 seconds at 0 hour, after 1 hour and after 2 hours of walking. Insoles used for experiment are normal insole, insole inserted Arch Support and pad. The electrodes for EMG measurement were set on waist (erector spinae), and thigh (vastus lateralis), calf (gastrocnemius). Evaluations of EMG were analyzed by shift of MF (Median Frequency) and MPF (Mean Power Frequency). Foot Pressure was analyzed by mean pressure of feet and change of walking time. As results, Arch Support insole had larger frequency shift value than that of normal insole. Frequency shift between Arch Support insoles and normal insole showed significant difference on 95% confidence interval. And insole 1 has the highest value of frequency shift. For results of foot pressure, Arch Support insoles show continuous decreasing tendency when comparing with normal insoles by changing of times. Also, insole 1 has the highest decreasing value of foot pressure. Therefore, this study presented that the Arch Support insole can promote muscle activities and improves comfort for a prolonged walking.

• 가정∙방문간호학회지
• /
• 제29권2호
• /
• pp.175-182
• /
• 2022

Purpose: The study examined the effects of ethical sensitivity and person-environment fit on person-centered care of nurses in long-term care hospitals. Methods: The participants were 111 nurses. Data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient, and multiple regression analysis with the SPSS program. Results: The mean of person-centered care was 2.95±0.62 out of 5. There were significant differences in person-centered care in terms of age, shift pattern, total clinical career, and educational experience of person-centered care. Person-centered care and ethical sensitivity, person-centered care and person-environment fit showed a positive correlation. Factors affecting the person-centered care were the age (20-29), shift pattern (three shift), person-environment fit. The explanatory power was 42%. Conclusion: These results can be used to increase the person-environment fit and adopt a differented approach based on age and shift pattern in order to enhance person-centered care. Therefore, it is necessary to develop and apply an person-centered care program for nurses in long-term care hospitals.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.45-55
• /
• 2018

It is usually difficult for dual-active-bridge (DAB) dc-dc converters to operate efficiently at light loads. This paper presents an in-depth analysis of a DAB with triple-phase-shift (TPS) control under the light load condition to overcome this problem. A kind of operating mode which is suitable for light load operation is analyzed in this paper. First, an analysis of the zero-voltage-switching (ZVS) constraints for the DAB converter has been carried out and a reasonable dead-band setting method has been proposed. Secondly, the basic operating characteristics of the converter are analyzed. Third, under the condition of satisfying the ZVS constraints, both the reactive power and the root mean square (RMS) value of the current are simultaneously minimized and a particle swarm optimization (PSO) algorithm is employed to analyze and solve this optimization problem. Lastly, both simulations and experiments are carried out to verify the effectiveness of the proposed method. The experimental results show that the converter can effectively achieve ZVS and improved efficiency.

• Safety and Health at Work
• /
• 제13권2호
• /
• pp.240-247
• /
• 2022

Background: Although insomnia and constipation are highly prevalent worldwide, studies examining a possible association between them are lacking. We examined the relationship between insomnia and constipation in shift workers who have a high prevalence of insomnia and other diseases. Methods: This study had a multicenter cross-sectional design and conducted using health examination data including self-reported questionnaires. In total, 12,879 and 4,650 shift workers were enrolled in Severance Hospital and Wonju Severance Hospital, respectively, during 2015-2017. Multivariate logistic regression models and subgroup analysis were performed in each center with the same protocol, using a common data model. Results: The mean age of the total population was 44.35 (standard deviation = 8.75); the proportion of males was 56.9%. Female sex, being underweight and non-smoker were strongly associated with an increased risk of constipation symptom (p < 0.001). Pooled odds ratios (ORs) were calculated using ORs of both centers with weights; there was a significant dose-response relationship (sub-threshold 1.76 [95% confidence interval [CI] 1.62-1.91]; moderate 2.28 [95% CI 2.01-2.60]; severe 4.15 [95% CI 3.18-5.41] in the final model, p for trend < 0.001). Subgroup analysis performed by stratifying sex and pooled ORs showed a similar trend to that of the entire group. Conclusion: We observed a strong correlation between insomnia and constipation in this population. Our findings may help in formulating guidelines and policies to improve quality of life in shift workers through the management of sleep quality and proper bowel function. This study is the first to report this relationship among people working in shifts.

• The Journal of the Acoustical Society of Korea
• /
• 제15권2E호
• /
• pp.24-32
• /
• 1996

A rigorous theory for modeling, analysis, optimum nonseparable filter bank in multidimensional M-band quantized subband codec are developed in this paper. Each pdf-optimized quantizer is modeled by a nonlinear gain-plus-additive uncorrelated noise and embedded into the subband structure. We then decompose the analysis/synthesis filter banks into their polyphase components and shift the down-and up-samplers to the right and left of the analysis/synthesis polyphase matrices respectively. Focusing on the slow clock rate signal between the samplers, we derive the exact expression for the output mean square quantization error by using spatial-invariant analysis. We show that this error can be represented by two uncorrelated components : a distortion component due to the quantizer gain, and a random noise component due to fictitious uncorrelated noise at the uantizer. This mean square error is then minimized subject to perfect reconstruction (PR) constraints and the total bit allocation for the entire filter bank. The algorithm gives filter coefficients and subband bit allocations. Numerical design example for the optimum nonseparable orthonormal filter bank is given with a quincunx subsampling lattice.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.38-43
• /
• 2008

Using an arterial pressure-volume (APV) model, we performed an analysis of the conventional blood pressure estimation method using an oscillometric sphygmomanometer with computer simulation. Traditionally, the maximum amplitude algorithm (MAA) has been applied to the oscillation waveforms of the APV model to obtain the mean arterial pressure and the characteristic ratio. The estimation of mean arterial pressure and characteristic ratio was significantly affected by the shape of the blood pressure waveforms and the cutoff frequency of high-pass filter (HPF) circuitry. Experimental errors result from these effects when estimating blood pressure. To determine an algorithm independent of the influence of waveform shapes and parameters of HPF, the volume oscillation of the APV model and the phase shift of the oscillation with fast Fourier transform (FFT) were tested while increasing the cuff pressure from 1 mmHg to 200 mmHg (1 mmHg/s). The phase shift between ranges of volume oscillation was then only observed between the systolic and the diastolic blood pressures. The same results were obtained from simulations performed on two different arterial blood pressure waveforms and one hyperthermia waveform.

• 품질경영학회지
• /
• 제44권4호
• /
• pp.751-770
• /
• 2016

Purpose: Two-stage ${\bar{X}}$ chart is a useful tool for process control when a surrogate variable may be used together with a performance variable. This paper extends the two-stage ${\bar{X}}$ chart to a three stage version by decomposing the first stage into the preliminary stage and the main stage. Methods: The expected cost function is derived using Markov-chain approach. The optimal designs are found for numerical examples using a genetic algorithm combined with a pattern search algorithm and compared to those of the two-stage ${\bar{X}}$ chart. Sensitivity analysis is performed to see the parameter effects. Results: The proposed design outperforms the optimal design of the two-stage ${\bar{X}}$ chart in terms of the expected cost per unit time unless the correlation between the performance and surrogate variables is modest and the shift in process mean is smallish. Conclusion: Three-stage ${\bar{X}}$ chart may be a useful alternative to the two-stage ${\bar{X}}$ chart especially when the correlation between the performance and surrogate variables is relatively high and the shift in process mean is on the small side.

• International Journal of Control, Automation, and Systems
• /
• 제4권5호
• /
• pp.637-644
• /
• 2006

Biomedical image is often complex. An applied image analysis system should deal with the images which are of quite low quality and are challenging to segment. This paper presents a framework for color cell image segmentation by learning and classification online. It is a robust two-stage scheme using kernel method and watershed transform. In first stage, a two-class SVM is employed to discriminate the pixels of object from background; where the SVM is trained on the data which has been analyzed using the mean shift procedure. A real-time training strategy is also developed for SVM. In second stage, as the post-processing, local watershed transform is used to separate clustering cells. Comparison with the SSF (Scale space filter) and classical watershed-based algorithm (those are often employed for cell image segmentation) is given. Experimental results demonstrate that the new method is more accurate and robust than compared methods.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.935-956
• /
• 2016

With the help of advanced image acquisition and processing technology, the vision-based measurement methods have been broadly applied to implement the structural monitoring and condition identification of civil engineering structures. Many noncontact approaches enabled by different digital image processing algorithms are developed to overcome the problems in conventional structural dynamic displacement measurement. This paper presents three kinds of image processing algorithms for structural dynamic displacement measurement, i.e., the grayscale pattern matching (GPM) algorithm, the color pattern matching (CPM) algorithm, and the mean shift tracking (MST) algorithm. A vision-based system programmed with the three image processing algorithms is developed for multi-point structural dynamic displacement measurement. The dynamic displacement time histories of multiple vision points are simultaneously measured by the vision-based system and the magnetostrictive displacement sensor (MDS) during the laboratory shaking table tests of a three-story steel frame model. The comparative analysis results indicate that the developed vision-based system exhibits excellent performance in structural dynamic displacement measurement by use of the three different image processing algorithms. The field application experiments are also carried out on an arch bridge for the measurement of displacement influence lines during the loading tests to validate the effectiveness of the vision-based system.