• 세라미스트
• /
• 제8권1호
• /
• pp.50-56
• /
• 2005

압전재료의 다양한 에너지 변환특성 중 기계-전기 에너지간 변환 특성만을 이용하고자 하는 경우로 한정하고, 압전재료의 물성 및 진동모드, 재료물성 평가 사례들을 요약하여 소개하였다. 그러나 이상에서 설명한 압전특성은 매우 개략적인 개념으로서 우수한 압전 응용부품을 개발하기 위해서는 몇 가지 유의할 사항들이 있다. 압전재료는 보다 기본적으로 열에너지, 기계에너지, 전기에너지, 나아가서 Maxwell 방정식에 의해서 전기장과 연결되는 자기에너지까지도 연결시켜서 상호간에 에너지 변환작용을 일으킬 수 있는 특성을 가진다. 기계적 변형(S) = 탄성변형효과 + 역압전효과 + 열팽창효과 전기적 변위(D) = 압전효과 + 유전효과 + 초전효과 즉, 압전 응용부품이 온도변화 및 자기장이 인가되는 환경에서 순수하게 압전현상만을 이용하고자 한다면, 응용분야 및 주위환경에 따라 압전세라믹 소자가 외부 환경변화에 반응을 하지 않도록 적절한 차단 대책을 수립하여야만 한다. 그러나 압전재료의 외부 자기장의 변화에 대한 반응도는 전기장에 대한 반응도에 비해서 매우 작으므로 통상 무시해도 무방하다고 본다. 그리고 압전재료에서 전기장-기계장의 선형성이 보장되는 크기에는 뚜렷한 한계가 있고, 선형성 영역을 벗어나면 이력특성에 의해 비선형 특성 및 포화상태를 보이게 된다는 점 또한 주의하여야 할 점이다. 또한 압전특성은 Curie 온도이하에서만 존재하고, 그 이상의 온도에서는 쌍극자들의 지나친 운동성에 의해 결정 대칭성이 변하여 압전특성이 소멸되므로 사용 온도 구간에 엄격한 제한을 두어야 함도 응용에 유의하여야 한다.

• 조명전기설비학회논문지
• /
• 제14권4호
• /
• pp.57-64
• /
• 2000

본 논문에서는 단권선 가동자석형 IDM올 대상으로, LDM 질량의 증가없이 철심 중심부의 포화를 억제하면서 일정 추력을 발생시켜 장 스트로크화가 가능한 다권선형 LDM을 제안하였다. 제안된 LDM의 추력특성을 해석하기 위하여 유한요소해석 소프트웨어인 Maxwell 2-D를 이용하여, 영구자석 자극과 코일 사이의 공극에서 발생하는 힘(F)중, 수직력$(F_y)$과 수평력$(F_x)$을 분석하였다. 이로부터 일정 추력을 발생할 수 있는 영구자석 폭과 권선 폭의 비 1:0.84 를 결정하여, 전기자 권선올 분할 권션하였다. 이러한 결과에 대한 타당성은 다권선형 IDM을 설계, 제작하여 실험을 통해 입증하였다.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.801-805
• /
• 2013

In this study, electrocaloric effects of Pb-free $(Ba_{0.85}Ca_{0.15})(Ti_{0.92}Zr_{0.08})O_3$ ferroelectric ceramics were investigated and discussed using the characteristics of P-E hysteresis loops at wide temperature range from room temperature to $140^{\circ}C$. The remnant polarization $P_r$ and coercive field $E_c$ were decreased with increasing temperature. The temperature change ${\Delta}T$ by the electrcaloric effect was calculated by Maxwell's relations, and reached the maximum of ~0.15 at $120^{\circ}C$ under applied electric field of 30 kV/cm.

• 전기의세계
• /
• 제25권1호
• /
• pp.95-100
• /
• 1976

The main purpose of this paper is to study on the transient current due to the change of environmental temperature under no external field in the arrangement of M$_{1}$(metal)-P(polyver)-M$_{2}$(metal). The specimer of polymeric insulator sandwiched by two metal electrodes composes a parallel-plate condenser represented by Maxwell-model. The behaviors of short circuit current flowing in M-P-M arrangement are very complex and the analysis of its conduction mechanism appears to be much complicated. In this paper we can suggest that a contact potential difference as an energetic state exists in the thin film specimen both sides of which are contacted by two different metals having different cook functions. Futhermore the contact potential difference appears to be constant through the course of temperature change, however, the dielectric constant and caparitance of the specimen must be temperature dependent. Accordingly the charge difference induced on both sides of electrodes may be a cause for the shory circuited transient current flowing through the external circuit. It is also suggestive that the results of the observation must be considered in cases of insulation design of electrical machines and D.C. cable for high voltage use.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.41-44
• /
• 1999

Displacement current was generated in the pressure stimulus and light stimulus. Solution of azobenzene molecules (8A5H) have to character trans-to-cis. Pressure stimulus generate in the pressure and current. light stimulus generate in the displasement current. The Maxwell displacement current measuring technique has been applied for the investigation of azobenzene organic thin films under alternating photoirradiation with ultraviolet(360nm) and visible (450nm) light. The displacement current was generated due to the trans-to-cis photoisomerization by irradiation with ultraviolet light(λ$_1$=360 nm) Whereas the displacement current was generated in the opposite direction due to the cis-to-trans photoisomerization by irradiation with visible light(λ$_2$=450nm). As result, To show twice reaction certainly phase transition in pressure. A first range generated from 24$\AA$$^2$ to 29$\AA$$^2$and second range generated from 20$\AA$$^2$to 24$\AA$$^2$. Also, cetainfy stimulus apper low pressure and high pressure in photoirradiation. To see different every moment phase transition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.277-279
• /
• 2005

The imbalance of energy demand and supply caused by rapid industrialization around the world and the associated environmental issues require and alternative energy source with possible renewable fuels. Political instability and depletion of cruel oils are other factors that cause fluctuation of oil price. Securing a new alternative energy source for the next century became an urgent issue that our nation is confronting with. As a matter of fact, the fuel cell technology can be widely used as next generation energy regardless of regions and climate. Specially, the ability of expansion and quick installation enable one to apply it for distributed power, where the technology is already gaining remarkable attentions for the application. Particularly, leading industrialized nations are focusing on the PEM fuel dell with anticipation that this technology will find their place of applications in the vehicles and homes. In this study, demonstrate the multi physics modeling of a proton exchange membrane(PEM) fuel cell with interdigitated flow field design. The model uses current balances, mass balance(Maxwell-Stefan diffusion for reactant, water and nitrogen gas) and momentum balance(gas flow) to simulate the PEM fuel cell behavior.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.220-221
• /
• 2006

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved Quality of the lighting space. Above all, the advantages of ring-shaped electrodeless fluorescent lamp are the removal of internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. Therefore, the life time of ring-shaped electrodeless fluorescent lamps is substantially higher than that of conventional fluorescent lamps last up to 60,000 hours, There are intended as a highly efficient replacement for the incandescent reflector lamp in many applications. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250 kHz and some specific conditions. In addition, the optical characteristics of ring-shaped electrodeless fluorescent lamp were measured including light flux, efficiency and color temperature for each case.

• 한국전기전자재료학회논문지
• /
• 제28권4호
• /
• pp.234-237
• /
• 2015

In this work, in order to develop the ceramics with an excellent electrocaloric effect, $[Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}]TiO_3$ ceramics were fabricated by conventional solid state reaction method. The ceramics was observed as rhombohedral phase by X-ray diffraction patterns. To investigate the electrocaloric effect of the ceramics, P-E hysteresis loops were measured at various temperature. The temperature change ${\Delta}T$ of these ceramics was calculated using the Maxwell's relations. The maximum value of temperature change ${\Delta}T$ was obtained as 0.3 $1^{\circ}C$ at $165^{\circ}C$ under applied electric fields 45 kV/cm.

• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.436-442
• /
• 2009

This paper describes a study on the design of compact polymer bushing with inner control shield. In the bushing, a high electric stress occurred between field shaper and central conductor by the closely space. Also coaxial cylindrical shield has a great height along the axis to control an electric field. Consequently, all the potentials are raised axially along the field shaper and electric stress is concentrated on a part of the surface of the FRP tube near the upper end of the field shaper. In accordance, the field control can be achieved by means of the designs of such inner control shields. The floating and ring shield designs was decreased electric field concentration at critical parts of the bushing. The shield gaps is formed between field shaper and ring shield. Accordance equipotential lines extend through gaps. As a result, the resulting electrical stress are thus reduced in the range $17{\sim}23%$ in the bushing with floating and ring shield designs. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing. The optimized design uses internal elements for electric stress grading at critical parts of the bushing.

• 천문학논총
• /
• 제30권2호
• /
• pp.65-67
• /
• 2015

The surfaces of most atmosphereless solar system objects are referred to as regolith, layers of loosely connected fragmentary debris, produced by meteorite impacts. Measurements of light scattered from such surfaces provides information about the composition and structure of the surface. A suitable way to characterize the scattering properties is to consider how the intensity and polarization of scattered light depends on the particle size, composition, porosity, roughness, wavelength of incident light and the geometry of observation. In the present work, the effect of porosity on bidirectional reflectance as a function of phase angle is studied for alumina powder with grain size of $0.3{\mu}m$ and olivine powder with grain size of $49{\mu}m$ at 543.5 nm. The optical constants of the alumina sample for each porosity were calculated with Maxwell Garnett effective medium theory. On using each of the optical constants of alumina sample in Mie theory with the Hapke model the variation of bidirectional reflectance is obtained as a function of phase angle with porosity as a parameter. Experimental reflectance data are in good agreement the model. For the olivine sample the effect of porosity is studied using Hapke (2008).