• 제목/요약/키워드: Maximum gain

검색결과 959건 처리시간 0.027초

증폭모듈을 이용한 마이크로파 다단증폭기 설계시 최적의 모듈간 연결길이 결정 (Determination of the optimum connection length between modules in the design of microwave multistage amplifiers using amplifier modules)

  • 임종식;강성춘
    • 전자공학회논문지D
    • /
    • 제34D권3호
    • /
    • pp.25-33
    • /
    • 1997
  • In the design of microwave multi-stage amplifiers composed of N amplifier modules, the variation of performances of amplifier as various connection length between modules has been studied. In addition, the methods, equations and conditions for the maximum gain or the most flat gain are presented. The results of sensitivity analysis for the connection length showed that the small change in phase of input, output reflection coefficients(S$_{11}$, S$_{22}$) of module itself is the most important in determination of connection length for the most flat gain. Th egain flatness of 2-module amplifier of which connection length between modules had been determined by presented methods was the best one out of performances with various arbitrary connectio lengths.s.

  • PDF

Current-Steered Active Balun with Phase Correction

  • Park, Ji An;Jin, Ho Jeong;Cho, Choon Sik
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권6호
    • /
    • pp.629-633
    • /
    • 2015
  • An active balun using current steering for phase correction is presented. The proposed active balun is constructed with two different unit balun structures based on current steering to reduce phase and amplitude errors. This type of topology can be compared with the conventional phase and amplitude correction techniques which do not incorporate the current steering. Designed and fabricated active balun in $0.18{\mu}m$ CMOS process operates over 0.95 - 1.45 GHz band, showing input reflection coefficient under -15 dB, phase error of $11^{\circ}$ and gain error of 0.5 dB. Gain is measured to be 0.3 dB maximum and power consumption of 7.2 mW is measured.

WARPED DISCRETE COSINE TRANSFORM EXTENSION TO THE H.264/AVC

  • Lee, Sang-Heon;Cho, Nam-Ik
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2009년도 IWAIT
    • /
    • pp.326-329
    • /
    • 2009
  • This paper proposes a new video compression algorithm using an adaptive transform that is adjusted depending on the frequency contents of the input signals. The adaptive transform is based on the warped discrete cosine transform (WDCT) which is shown to provide better performance than the DCT at high bit rates, when applied to JPEG compression scheme [1, 2, 3]. The WDCT is applied to the video compression in this paper, as a new feature in the H.264/AVC. The proposed method shows the coding gain over the H.264/AVC at high bit rates. The coding gain is shown over the 35dB PSNR quality, and the gain increases as the bit rate increases. (about 1.0dB at 45dB PSNR quality at maximum)

  • PDF

Feed-Forward Control of Transient Gain Dynamics of an EDFA for Optical Burst Networks

  • Cho, Jeong-Sik;Cho, Min-Jae;Won, Yong-Hyub
    • ETRI Journal
    • /
    • 제29권5호
    • /
    • pp.679-681
    • /
    • 2007
  • In this letter, we demonstrate a technique for suppression of transients in output bursts of an erbium-doped fiber amplifier (EDFA) in an optical burst network. To suppress the transients, the EDFA is forward-fed by non-fluctuating input utilizing a power-modulated burst control packet channel. Using the technique, we obtained a maximum 1.7 dB reduction in gain transient in the EDFA output, and we transmitted 9.953 Gbps data bursts and 2.488 Gbps burst control packets stably.

  • PDF

PZT계 압전 세라믹 변압기의 감압특성 (Characteristics of Step-Down Transformer in PZT Piezoelectric Ceramics)

  • 김오수;이준형;손정호;남효덕;조상희
    • 한국전기전자재료학회논문지
    • /
    • 제14권11호
    • /
    • pp.885-891
    • /
    • 2001
  • Ring/dot-type step-down piezoelectric transformer was manufactured by using Pb[(Mn$\sub$1/3/Sb$\sub$2/3)$\sub$0.05/Zr$\sub$0.475/Ti$\sub$0.475/]O$_3$ ceramics, which have excellent high-power piezoelectric properties. The characteristics of step-down piezoelectric transformer as a function of load resistance at output terminal was examined. Voltage gain was greatly dependent on drive frequency and load resistance, and showed maximum voltage gain at the resonance frequency. The output voltage was linearly increased as the input voltage increased. Voltage gain of the step-down piezoelectric transformer with respect to input voltage was very stable when the load resistance was in the range of 50-500 $\Omega$ .

  • PDF

Shuffling 및 상관도를 이용한 웨이블릿 영상 압축 (Wavelet Transform Image Compression Using Shuffling and Correlation)

  • 김승종;민병석;정제창
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.609-612
    • /
    • 1999
  • In this paper, we propose wavelet transform image compression method such that an image is decomposed into multiresolutions using biorthogonal wavelet transform with linear phase response property and decomposed subbands are classified by maximum classification gain. The classified data is quantized by allocating bits in accordance with classified class informations within subbands through arbitrary set bit allocation algorithm. And then, quantized data in each subband are entropy coded. The proposed coding method is that the quantized data perform shuffling before entropy coding in order to remove sign bit plane. And the context is assigned by maximum correlation direction for bit plane coding.

  • PDF

Z-Source Converter with Maximum Boost Voltage Gain

  • Nguyen, Minh-Khai;Jung, Young-Gook;Lim, Young-Cheol
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 추계학술대회 논문집
    • /
    • pp.112-114
    • /
    • 2008
  • This paper proposes a new two-stage Z-source converter (TSZC). The purpose of the proposed system is to obtain the ac voltage with a maximum boost voltage for fuel cell applications as a renewable energy source. In order to provide a continuous current path, a switching strategy for the dc-ac ZSI and ac-ac ZSC of the proposed system was used. The operation principle, analysis and simulation results of 1.2 kW fuel cell stack were also presented.

  • PDF

회전로크 구조의 차분 선부호화 기법의 성능 분석 (Performance Analysis of Rotation-lock Differential Precoding Scheme)

  • 김영주
    • 전자공학회논문지
    • /
    • 제50권4호
    • /
    • pp.9-16
    • /
    • 2013
  • LTE (long term evolution) 및 LTE-A (LTE-Advanced) 시스템에서는 폐회로 기반의 다중 안테나 기술이 적용되었으며, 최대 비 전송 방식 (maximum ratio transmission, MRT) 보다 성능은 감소되지만, 동 이득 (equal gain) 특성을 유지할 수 있는 동 이득 전송 (equal gain transmission, EGT) 코드북을 채택하고 있다. 본 논문에서는 LTE 및 LTE-A 시스템에서 사용되는 코드북보다 성능을 향상시킬 수 있는 차분 코드북을 제안한다. 특히 동 이득 특성을 그대로 유지하면서 LTE 시스템의 코드북 요구조건을 모두 만족시키는 코드북을 제안한다. 코드북을 구성하는 코드워드들의 인자들 (elements)이 8-PSK(phase-shift keying) 성운 (constellation) 만을 사용하므로, 선부호화 및 복호 시 계산량이 낮아지는 LTE 코드북의 장점을 그대로 유지할 수 있다. 동 이득 성질은 특히 상향 링크에서 첨두 전력 대 평균 전력비 (PAPR)에 상당한 영향을 미치므로 매우 중요하다. 본 논문에서는 각 송신 안테나에 동 이득을 유지하는 성질을 이용한 새로운 차분 코드북을 제안하고, 동작원리를 회전 로크 구조로 설명한다. 컴퓨터 시뮬레이션을 통한 성능 분석에서, 동일한 피드백 비트 수를 갖는 같은 크기의 코드북에서 제안하는 차분 코드북은 기존 LTE 코드북보다 최소 0.9dB 성능 향상을 보인다.

H모양 개구면에 스트립 급전된 광대역 및 고이득 패치 안테나 (The Wide-band and High-gain Strip Patch Antenna coupled with a H-shaped Aperture)

  • 신호섭;김남
    • 대한전자공학회논문지TC
    • /
    • 제38권4호
    • /
    • pp.27-37
    • /
    • 2001
  • 광대역과 고이득과 낮은 교차 편파 레벨을 가지는 H자 모양의 개구면을 가진 스트립 급전된 패치 안테나를 설계 및 제작하고 정재파비, 스미스챠트 임피던스 특성, 동일/교차 편파 방사패턴, 이득 등을 측정하였다. 본 안테나의 측정된 대역폭(VSWR<2.0)은 47.1%이다. 또한 후방방사를 줄이고 이득을 높이기 위해 반사판을 사용하였을 때 교차 편파 레벨은 E-plane에서 -18.2 dB이하이고 H plane에서 -25.7 dB이하이다. 그리고 최대 이득은 2.05 GHz의 주파수에서 10.4 dB이며, 3 dB gain 대역폭은 중심주파수 2.17 GHz에서 24%의 광대역폭을 가짐을 알 수 있었다. 본 안테나는 광대역을 필요로 하는 이동통신, 무선 LAN, RF 통신시스템 등에 사용될 수 있다.

  • PDF

0.1-μm GaAs pHEMT 공정을 이용한 높은 변환이득을 가지는 W-대역 캐스코드 혼합기 설계 (Design of W-band Cascode Mixer with High Conversion Gain using 0.1-μm GaAs pHEMT Process)

  • 최원석;김형진;김완식;김종필;정진호
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권6호
    • /
    • pp.127-132
    • /
    • 2018
  • 본 논문에서는 W-대역에서 동작하는 고이득 캐스코드 혼합기를 설계 및 제작하였다. W-대역과 같이 높은 주파수 대역에서는 소자의 성능저하로 인해 혼합기의 변환손실이 커지게 된다. 이는 송수신단 구성 시 RF 버퍼 증폭기와 같은 추가적인 이득을 줄 수 있는 회로의 추가로 이어지고 이는 시스템 전체의 선형성 및 안정성에 영향을 미친다. 따라서 혼합기 설계 시 변환이득을 최대화하는 설계가 필요하다. 본 논문에서는 혼합기의 변환이득을 최대화하는 것에 초점을 두고 높은 변환이득을 얻기 위해 혼합기의 바이어스를 최적화하였고, 로드-풀 시뮬레이션을 이용하여 출력 정합회로를 최적화하였다. 설계된 회로는 $0.1-{\mu}m$ GaAs pHEMT 공정을 이용하여 제작하였고, 측정을 통해 성능을 검증하였다. 제작된 회로는 W-대역에서 -4.7 dB의 최대 변환이득과 2.5 dBm의 입력 1-dB 감쇄 전력이 측정되었다.