• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권3호
• /
• pp.240-249
• /
• 2004

In the present paper efforts have been made to optimize InAlAs/InGaAs HEMT by enhancing the effective gate voltage ($(V_c-V_off)$) using pulsed doped structure from uniformly doped to delta doped for microwave frequency applications and reliability. The detailed design criteria to select the proper design parameters have also been discussed in detail to exclude parallel conduction without affecting the del ice performance. Then the optimized value of $V_c-V_off$and breakdown voltages corresponding to maximum value of transconductance has been obtained. These values are then used to predict the transconductance and cut-off frequency of the del ice for different channel depths and gate lengths.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.743-746
• /
• 1999

In this paper, Flyback type DC/DC Switching Converter was designed, analyzed and fabricated. Worst Case Analysis(WCA) was peformed with Mathcad program and presents circuit simulation results for the in-rush current limit circuit. The value of the maximum OFF voltage stress is 131.84V, it is less than device specification(200V). The switching frequency(nominal case) and duty cycle at the wont case analysis are 75KHz and 34.62%, respectively. The maximum in-rush current presents 0.5A Those results show a possibility for use in space

• 전자공학회논문지SC
• /
• 제46권6호
• /
• pp.28-37
• /
• 2009

본 논문에서는 지역 최대 빈도 값을 이용하여 V-시차 맵 상에서 도로 특징 정보를 추출하고 이를 이용한 장애물체 검출 방법을 제안한다. 기존 방법은 장애물체의 크기 수 및 종류 등이 변경되면 추출 성능이 영향을 받는다. 특히 크기가 큰 장애물체나 중앙분리대와 같은 연속적인 장애물체에 대한 추출이 어렵다. 이를 해결하기 위하여 주변 상황 영향을 적게 받는 도로 특징 정보를 새로운 장애물체의 유무 판단 기준으로 사용한다. 도로 특징 정보는 V-시차 맵 상에서 특정 열에 장애물체가 많이 존재하는 상황에서도 전체적인 그 특징을 잘 유지함으로 그 강건성이 높아 새로운 판단기준으로 적합하다. 그리고 V-시차 맵 상에서 도로 특징 정보를 쉽게 추출하기 위하여 먼저 지역 최대 빈도 값을 이용하여 이진 V-시차 맵을 생성한다. 그리고 기존 중간 값과 비교하여 도로 특징 정보가 아닌 부분은 제거하고, 마지막으로 보간을 통하여 최종 도로 특징 정보를 추출한다. 이를 시차 맵의 각 행과 비교하여 장애물체 영역을 검출한다. 또한 장애물체 영역 검출 성능을 향상시키기 위하여 검출 단계에서 발생한 노이즈를 제거하기 위한 후처리 과정도 제안한다. 그리고 실제 도로 영상에 적용한 실험을 통하여 제안한 알고리즘이 기존 방법에 비해 장애물체 검출 성능이 우수함을 보인다.

• Ocean Systems Engineering
• /
• 제3권3호
• /
• pp.203-217
• /
• 2013

A PTO (power-take-off) mechanism by using relative heave motions between a floating buoy and its inner mass (magnet or amateur) is suggested. The inner power take-off system is characterized by a mass with linear stiffness and damping. A vertical truncated cylinder is selected as a buoy and a special station-keeping system is proposed to minimize pitch motions while not affecting heave motions. By numerical examples, it is seen that the maximum power can actually be obtained at the optimal spring and damper condition, as predicted by the developed WEC(wave energy converter) theory. Then, based on the developed theory, several design strategies are proposed to further enhance the maximum PTO, which includes the intentional mismatching among heave natural frequency of the buoy, natural frequency of the inner dynamic system, and peak frequency of input wave spectrum. By using the intentional mismatching strategy, the generated power is actually increased and the required damping value is significantly reduced, which is a big advantage in designing the proposed WEC with practical inner LEG (linear electric generator) system.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.224-227
• /
• 2015

Ferroelectric $Pb_2(Sc,Nb)O_6$ were prepared under two different sintering conditions using the oxide mixing method and the electrical properties were measured. The sintering conditions were $1350^{\circ}C$ for 25 minutes and $1400^{\circ}C$ for 20 minutes. EDX spectroscopy and XRD were used to determine the crystalline characteristic of the $Pb_2(Sc,Nb)O_6$ compositions Pyrochlore phase showed about 2% in all $Pb_2(Sc,Nb)O_6$ specimens. It expands the growth of crystals in samples sintered at $1400^{\circ}C$ than $1350^{\circ}C$, but all samples were the optimal crystallization. The temperature and frequency dependence of the complex dielectric constant and admittance were measured to analyze the electrical properties. The high dielectric constant of the specimens reflects the good stoichiometry and crystallization. The maximum value of the dielectric constant in the two specimens treated with sintering at $1350^{\circ}C$ and $1400^{\circ}C$ were more than 27,000, and the dielectric loss at room temperature is smaller than 0.05. The maximum dielectric constant decreased with increasing frequency, the transition temperature also increased in $Pb_2(Sc,Nb)O_6$ compositions. The admittance and susceptance values reach a peak at all temperatures, and the magnitude of the peak increases with increasing measuring temperature. Strong frequency dependent of maximum admittance, susceptance, dielectric constant and dielectric loss were observed.

• Structural Engineering and Mechanics
• /
• 제88권1호
• /
• pp.1-12
• /
• 2023

In this study, forced vibration behavior of a piezo magneto electric sandwich Timoshenko beam is investigated. It is assumed a sandwich beam with porous core and graphene platelet reinforced composite (GPLRC) in facesheets subjected to magneto-electro-elastic and temperature-dependent material properties. The magneto electro platelets are under linear function along with the thickness that includes a cosine function and magnetic and electric constant potentials. The governing equations of motion are derived using modified strain gradient theory for microstructures. The effects of material length scale parameters, temperature change, different distributions of porous, various patterns of graphene platelets, and the core to face sheets thickness ratio on the natural frequency and excited frequency of a sandwich Timoshenko beam are scrutinized. Various size-dependent methods effects such as MSGT, MCST, and CT on the natural frequency is considered. Moreover, the final results affirm that the increase in porosity coefficient and volume fractions lead to an increase in the amount of natural frequency; while vice versa for the increment in the aspect ratio. From forced vibration analysis, it is understood that by increasing the values of volume fraction and the length thickness of GPL, the maximum deflection of a sandwich beam decreases. Also, it is concluded that increasing the temperature, the thickness of GPL, and the initial force leads to a decrease in the maximum deflection of GPL. It is also shown that resonance phenomenon occurs when the natural and excitation frequencies become equal to each other. Outcomes also reveal that the third natural frequency owns the minimum value of both deflection and frequency ratio and the first natural frequency has the maximum.

• 설비공학논문집
• /
• 제8권3호
• /
• pp.437-450
• /
• 1996

A set of stability equations is formulated for natural convection flows adjacent to a vertical isothermal surface melting in cold pure water. It takes account of the nonparallelism of the base flows. The melting rate is regarded as a blowing velocity at the ice surface. The numerical solutions of the linear stability equations which constitute a two-point boundary value problem are accurately obtained for various values of the density extremum parameter $R=(T_m-T_{\infty})/(T_0-T_{\infty})$ in the range $0.3{\leq}R{\leq}0.6$, by using a computer code COLNEW. The blowing effects on the base flow becomes more significant as ambient temperature ($T_{\infty}$) increases to $T_{\infty}=10^{\circ}C$. The maximum decrease of heat transfer rate is about 6.4 percent. The stability results show that the melting at surface causes the critical Grashof number $G^*$ and the maximum frequency of disturbances to decrease. In comparision with the results for the conventional parallel flow model, the nonparallel flow model has a higher critical Grashof number but has lower amplification rates of disturbances than does the parallel flow model. The spatial amplification contours exhibit that the selective frequency $B_0$ of the nonparallel flow model is higher than that of the parallel flow model and that the effects of melting are rather small. The present study also indicates that the selective frequency $B_0$ can be easily predicted by the value of the frequency parameter $B^*$ at $G^*$, which comes from the neutral stability results of the nonparallel flow model.

• 대기
• /
• 제33권4호
• /
• pp.399-411
• /
• 2023

This study compares the three detection algorithms of East Asian summer atmospheric rivers (ARs). The algorithms developed by Guan and Waliser (GW15), Park et al. (P21), and Tian et al. (T23) are particularly compared in terms of the AR frequency, the number of AR events, and the AR duration for the period of 2016-2020. All three algorithms show similar spatio-temporal distributions of AR frequency, centered along the edge of the North Pacific high. The maximum AR frequency gradually shifts northward in early summer as the edge of the North Pacific High expands, and retreats in late summer. However, the detailed pattern and the maximum value differ among the algorithms. When the AR frequency is decomposed into the number of AR events and the AR duration, the AR frequencies detected by GW15 and P21 are equally explained by both factors. However, the number of AR events primarily determine the AR frequency in T23. This difference occurs as T23 utilizes the machine learning algorithm applied to moisture field while GW15 and P21 apply the threshold value to moisture transport field. When evaluating AR-related precipitation, the ARs detected by P21 show the closest relationship with total precipitation in East Asia by up to 60%. These results indicate that AR detection in the East Asian summer is sensitive to the choice of the detection algorithm and can be optimized for the target region.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.795-798
• /
• 1998

In this paper, a new class of bandpass filter using a modified Chebyshev lowpass filter function is described. The prosposed bandpass filter which exhibits diminishing ripples in the passband has maximum value at the center frequency. Due to the lower pole-Q, the performance in the frequency and time domains is improved as compared with the classical Chebyshev bandpass filter.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.556-560
• /
• 1991

The behavior of Ni-Zn ferrite/Mn-Zn ferrite composite electromagnetic absorber was investigated. The imaginary part of complex permeability of the composite was higher than that of either ferrite alone at all frequency range (50∼1400MHz) studied. The difference, which was pronounced in low frequency range, was reached the maximum value when the composite consisted of constituent ferrites with equal amount. Since the thickness in inversely proportional to the imaginary part of complex permeability for the ferrite absorber, it was possible to reduce the thickness of electromagnetic absorber by employing a composite of two different ferrites.