• 전기학회논문지P
• /
• 제54권1호
• /
• pp.20-29
• /
• 2005

This paper presents an implementation of efficiency optimization of reluctance synchronous motor (RSM) using a neural network (NN) with a direct torque control (DTC). The equipment circuit considered with iron losses in RSM is analyzed theoretically, and the optimal current ratio between torque current and exiting current component are derived analytically. For the RSM driver, torque dynamic can be maintained with DTC using TMS320F2812 DSP Controller even with controlling the flux level because a torque is directly proportional to the stator current unlike induction motor. In order to drive RSM at maximum efficiency and good dynamics response, the Backpropagation Neural Network is adapted. The experimental results are presented to validate the applicability of the proposed method. The developed control system show high efficiency and good dynamic response features with 1.0 [kW] RSM having 2.57 inductance ratio of d/q.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.522-525
• /
• 1999

This paper describes a simple but effective method for energy saving of ac motors having a widely variable load. The proposed method is based on an optimal efficiency control which is operated by voltage-current pattern such as to maintain the maximum efficiency on the efficiency-output characteristics of the motor, in voltage control with triac. In this paper, authors present the experimental results of the SPIM under controlling of current of main and auxiliary winding by using a one chip microcontroller. Experiments are focused on a capacitor stating single phase induction motor the optimal energy saving are proved by the proposed method.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권9호
• /
• pp.431-436
• /
• 2005

This paper studies a novel boost DC-DC converter operated high efficiency for discontinuous current mode (DCM) control. The converter worked in DCM eliminates the complicated circuit control requirement, reduces a number of components, and reduces the used reactive components size. In the general DCM converter, the switching devices are turned-on the zero current switching (ZCS), and the switching devices must be switched-off at a maximum reactor current. To achieve the zero voltage switching (ZVS) at the switching turn-off, the proposed converter is constructed by using a new loss-less snubber circuit. Soft-switched operation of the proposed boost converter is verified by digital simulation and experimental results. A new boost converter achieves the soft-switching for all switching devices without increasing their voltage and current stresses. The result is that the switching loss is very low and the efficiency of boost DC-DC converter is high.

• Journal of Communications and Networks
• /
• 제18권5호
• /
• pp.713-724
• /
• 2016

Energy consumption has become a main problem of sustainable development in communication networks and how to communicate with high energy efficiency is a significant topic that researchers and network operators commonly concern. In this paper, an energy-efficient multicast algorithm in multi-hop wireless networks is proposed aiming at new generation wireless communications. Traditional multi-hop wireless network design only considers either network efficiency or minimum energy consumption of networks, but rarely the maximum energy efficiency of networks. Different from previous methods, the paper targets maximizing energy efficiency of networks. In order to get optimal energy efficiency to build network multicast, our proposed method tries to maximize network throughput and minimize networks' energy consumption by exploiting network coding and sleeping scheme. Simulation results show that the proposed algorithm has better energy efficiency and performance improvements compared with existing methods.

• 대한후두음성언어의학회지
• /
• 제11권1호
• /
• pp.98-103
• /
• 2000

Background and Objectives : The etiology and pathophysiology of spasmodic dysphonia is yet unknown. This study was performed to determine if any laryngeal aerodynamic parameter distinguish the voice of patient diagnosed as having adductor spasmodic dysphonia from individuals with normal voice production and to investigate the pathophysiology of spasmodic dysphonia. Materials and Methods : fifteen women diagnosed as having adductor spasmodic dysphonia and fifteen normal control women participitated in this study Maximum phonation time, mean air flow rate, subglottic pressure, vocal efficiency, Vfo, NHR, VTI, FTRI, ATRI, Jitter percent, Shimmer percent were obtained from the participants using 'MDVP(multi-dimensional voice program)' of CSL(Computerized Speech lab, Kay Elemetrics, Co., Model No. 4300), and 'maximum sustained phonation' and 'IPIPI test' of AP II(Aerophone II, Kay Elemetrics, Co., Model 6800). Results : T-test statistical analysis revealed statistically different values for vocal efficiency, Vfo, NHR, MPT, litter percent, Shimmer percent between the spasmodic dysphonia group and the control group. Conclusions : Spasmodic dysphonia affects the ability of the laryngeal mechanism to function effectively. Results from our study demonstrate that certain aerodynamic and acoustic parameters distinguish adductor spasmodic dysphonia from normal voice.

• 설비공학논문집
• /
• 제24권2호
• /
• pp.91-101
• /
• 2012

A 200 W portable polymer electrolyte membrane fuel cell (PEMFC) system is developed. The PEMFC system consists of an air-cooled fuel cell stack module, a fuel supply subsystem, a power management subsystem, and a control electronics subsystem. The control logic is designed for the stable system operation. The system-level performance evaluation discloses that the present PEMFC system provides a rated power output of 200.5 W at 13.4 V with the maximum balance-of-plant (BOP) efficiency of 72%, and maximum system efficiency based on lower heating value (LHV) is 37% at 120.7 W system power output.

• 한국분무공학회지
• /
• 제28권4호
• /
• pp.191-197
• /
• 2023

LPG direct injection (LPDi) technology is a method of improving the weaknesses of existing LPG vehicles by directly injection into the combustion chamber. This study was conducted on the comparison of emissions and fuel efficiency performance of the engine and vehicle by applying LPDi technology. The LPDi hybrid engine's maximum output and maximum torque were measured at an equivalent level of less than 1% compared to conventional gasoline fuel. The fuel amount was corrected using the LCU controller, and the THC, CO, and NOx emissions were reduced to 90% in the operating range of the three-way catalyst through air-fuel ratio control. The analysis of THC+NOx and CO emissions in FTP-75 (CVS-75) driving mode satisfied the US LEV III SULEV30 regulation.

• 전기학회논문지P
• /
• 제63권2호
• /
• pp.113-118
• /
• 2014

Tidal power is one of new and renewable energy sources. Tidal power is generated by using the gap in the water level between the water outside and inside the embankment. All tidal power plant in Korea were being operated by import of turn-key from abroad. The know-how and technology which are the most important to build predictive control system has become increasingly difficult to obtain from advanced countries because most of them avoid to transfer, which the domestic development of the control system is needed. In this paper, a study on start stop system at water turbine-generator for tidal power plant at the beginning of development was presented. For improvement the efficiency and develope of core technology of the start stop system, the technique and characteristics of tidal power, modeling, maximum generation calculation method, and optimal control of joint control system in Sihwa tidal power plant were studied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1211-1212
• /
• 2007

In the PV power system, output of the PV array must contain inherent ripples due to the single-phase inverter. So, the function of maximum power point tracking to increase the output efficiency of PV system is degraded. Therefore, to overcome this problem, this paper presents a control strategy for the reducing ripples of the PV array output in grid-connected photovoltaic power system. The proposed control system consists of two loops; the maximum power point tracking loop using the perturbation and observation method is used to calculate the reference solar array terminal voltage(Vref) for reducing ripples of the PV array output and the PI control loop is used to regulate the solar array output voltage according to the Vref. The performance of proposing control strategy is analyzed by means of the PSCAD/EMTDC simulation and experiment. As a result, we may obtain the high performance of the proposed control strategy.

• 전력전자학회논문지
• /
• 제5권4호
• /
• pp.309-317
• /
• 2000

이 논문은 4상 6극 SRM의 최대토크/효율 및 최소토크맥동 운전을 위한 적정 전압과 스위칭각에 관한 연구이다. SRM은 비선형적인 특성이강하여 해석적인 방법으로 특성을 고찰하거나 속도/토크 제어가 어려운 단점이 있다. 이 논문에서는 최대토크/효율 및 최소토크맥동의 운전이 가능한 최적의 스위칭각과 전압을 SIMULINKK를 이용하여 구하였다. 시뮬레이션 결과 최대토크운전에서는 속도는 스위칭각에 의존되고, 토크는 전압에 의존됨을 알 수 있었다. 뿐 만 아니라 최대효율, 최소토크리플운전에서는 전압보디는 속도와 스위칭각에 의해서 최대효율과 최소토크 리플이 발생되는 것을 알 수 있었다. 시뮬레이션에 의해서 구해진 최적각들을 ROM 데이터형식으로 참조 테이블을 만들어 마이크로 프로세서를 이용하여 구동하여 최대토크/효율, 최소토크리플 운전의 타당성을 보였다.