• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.341-348
• /
• 1995

An analysis of the use of temperature profiles in the determination of the kinetic parameters of combustion synthesis of Ti5Si3 were investigated. From profile analysis, an apparent activation energy of 12KJ/mol was calculated. The Maximum heating rate achieved during 10wt% Ti5Si3 reaction by the product dilution method was approximately $1.5\times$104 K/s. Coupling this value with the measured wave velocity of 7.02 cm/s yields a maximum thermal gradient of 2.14$\times$103 K/cm. The value of tr (=t*) was calculated to be 1.2$\times$10-1 s and the value of td (=tx) was calculated to be 32.89 s. Using the definition of t* and the measured wave velocity, the effective thermal diffusivity, $\alpha$, was calculated to be 0.59$\times$10 $\textrm{cm}^2$/s. From these analysis, the power function, G, was also calculated.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.68-74
• /
• 2017

Nanoimprint lithography (NIL) is a next generation technology for fabrication of micrometer and nanometer scale patterns. There have been considerable attentions on NIL due to its potential abilities that enable cost-effective and high-throughput nanofabrication to the display device and semiconductor industry. Up to now there have been a lot of researches on thermal NIL, but most of them have been focused on polymer deformation in the molding process and there are very few studies on the cooling and demolding process. In this paper a cooling process of the polymer resist in thermal NIL is analyzed with finite element method. The modeling of cooling process for mold, polymer resist and substrate is developed. And the cooling process is numerically investigated with the effects of imprinting temperature and residual layer thickness of polymer resist on stress distribution of the polymer resist. The results show that the lower imprinting temperature, the higher the maximum von Mises stress and that the thicker the residual layer, the greater maximum von Mises stress.

• 제3의학
• /
• 제1권1호
• /
• pp.103-113
• /
• 1996

It is thought that the quantity and quality of the heat stimulation and the mechanism of heating process are important to understand the moxa-combustion. In order to get the basic data on the effective moxa-combustion method, combustion temperature changes (average temperature, peak temperature, average gradient temperature and maximum gradient temperature) of the heating period were measured respectively by the density of moxa material. For the experiment, samples of $300mg/0.26cm^3$ , $400mg/0.26cm^3$ and $500mg/0.26cm^3$ of moxa material were molded in a conical mold with each 10mm in diameter and height. 1. The average temperature and peak temperature of heating period on the moxa-combustion showed higher in the $400mg/0.26cm^3$ and $300mg/0.26cm^3$ than in the $500mg/0.26cm^3$ sample respectively. 2. The average gradient temperature of heating period on the moxa-combustion rose quickly in the $300mg/0.26cm^3$, $400mg/0.26cm^3$ and $500mg/0.26cm^3$ in that order and the maximum gradient temperature rose more quickly in the $300mg/0.26cm^3$ and $400mg/0.26cm^3$ than in the $500mg/0.26cm^3$ sample respectively. According to the above results, it is concluded that the density of moxa material is (the) more important (factor) than the weight or volume of moxa material on the combustion temperature changes of the heating period for the evaluation of the quality and quantity of moxa-combustion.

• 한국염색가공학회지
• /
• 제10권1호
• /
• pp.11-19
• /
• 1998

For the purpose of standardization and practicability of dyeing by natural dyes, the mordanting and dyeing properties of cochineal and carminic acid were studied. Appropriate extraction, dyeing and mordanting condition of cochineal were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of cochineal solution was 495nm, carminic acid was 533nm and 577nm. The color of carminic acid solution was affected by pH 6~9. The optimum temperature to extract cochineal was $80-100^\circ{C}$ and dyeing solution for 1 hour. And effective dyeing time to silk was 60min. Effective mordanting temperature was $80^\circ{C}$, and its time was 30min. In case mordants concentration, the maximum absorbance of Sn solution was 3%, K, Cu and Cr were in 1%. K/S value of dyeing fabrics was recoginazed by mordant treatment, specially Fe, Sn, Al, Cu. In the case of cochineal light fastness was increased by mordant treatment, specially Fe treatment. Perspiration fastness was good in acidic solution than in alkaline solution and perspiration fastness of cochineal was poor. Fastness of abrasion and dry-cleaning were good and these fastness improvement were generally effective for post-mordanting treatment.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.235-243
• /
• 2019

In South Korea, millions of poultry have died due to repeated heat waves every year. The purpose of this study is to analyze the characteristics of heating and cooling loads of chicken houses in Korea and to present an effective insulation and ventilation measures to minimize the damage of poultry due to summer heat wave and to save energy in chicken houses in winter. The heating and cooling loads of standard chicken house were calculated. As a result of the calculation of maximum heating load based on the minimum ventilation rate in winter, the outdoor air temperature requiring heating was $6{\sim}7^{\circ}C$ to keep the indoor air temperature of chicken houses as $24^{\circ}C$. The peak cooling load of chicken houses was mostly taken by the heat generated by chickens and the heat gain due to ventilation. The heat gain through building envelopes was as small as neglectable. Most of chicken houses is usually cooled by gigantic forced ventilation in summer in Korea. When the chicken houses are cooled by electric cooling machine such as cooler or air conditioner, it is more effective to keep minimum ventilation rate to reduce the maximum cooling load. To lower the temperature of supplying water to cooling pad, it is recommended to use the underground water below 10 meters from the ground if there is abundant underground water.

• 한국미생물·생명공학회지
• /
• 제23권6호
• /
• pp.763-769
• /
• 1995

As a mean to recover photosynthetic bacterial(PSB) cells and its practical uses in food industrial wastewater treatment, various biodegradable polyelectrolytes were first investigated for flocculation of suspended colloids in the PSB treatment process of soybean curd wastewater. Anionic polyelectrolytes such as sodium alginate and carrageenan were not effective but a cationic polyelectrolyte chitosan isolated from Portunus trituberclatus showed very effective flocculation activity. The concentration of chitosan, pH and temperature of wastewater for maximal flocculation were 40 mg/l, pH 7 and room temperature, respectively. Test using deacetylated chitosan to various degree showed higher flocculating activities in samples deacetylated over 75% and time for maximum flocculation was 40 min by stirring slowly under the above optimal conditions. Chitosan was not only effective to flocculate cells but also removed COD and MLSS of the wastewater. COD of 42% and MLSS of 87% were removed by addition of chitosan to the soybean curd wastewater treated with PSB.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.389-396
• /
• 1994

It is very important to clarify the ignition and flame propagation processes of methanol fuel in the Spark-ignition engine. High speed Schlieren photography and pressure trace analyses were used to study on combustion characteristics of methanol fuel in a constant volume chamber. Methanol-air mixtures equivalence rations from lean limit to 1.4 were ignited at initial pressure (0.1, 0.3, 0.5 MPa), temperature (313 343, 373 K) and ignition energy (40, 180 mJ). As the result of this study, we verified the characteristics such as ignition delay, effective thermal efficiency, flame propagation velocity, lean limit, ignitability and combustion duration. Obatained results are as follows. (1) The time to 10% reach of maximum pressure was 40-50% of the total combustion duration for this experimental condition hardly affected by equivalence ratio. (2) The Effective thermal efficiency, as calculated from maximum pressure was the highest when the mixture was slightly lean $({\phi} 0.8-0.9)$ and maximum pressure was the highest when the mixiture was slightly rich $({\phi} 1.2-1.2).$

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.480-485
• /
• 2006

A research was undertaken on the thermal properties and behavior of the conductors in a controlled chamber, which was designed to implement the outdoor air temperature, heat and wind conditions With ACSR $410mm^2$ overhead conductors, we measured the maximum temperature of the conductors and the temperature gradient from the core to the surface regions as a function of current, tension, wind velocity and outdoor air temperature. This test also provided a comparative analysis between the measured temperature values of conductors in the controlled chamber and the theoretical calculations of ANSI/IEEE at normal condition. There was not much influence of tension on the conductor temperature. However, the compactness of conductor wires increased with an increase in tension, which eventually increased the coefficient of effective thermal conductivity and, accordingly the conductor temperature was reduced more or less.

• 대기
• /
• 제22권3호
• /
• pp.299-307
• /
• 2012

This study is aimed to validate errors for detected suspicious temperature data using various quality control procedures for 61 weather stations in the Republic of Korea. The quality control algorithms for temperature data consist of four main procedures (high-low extreme check, internal consistency check, temporal outlier check, and spatial outlier check). Errors of detected suspicious temperature data are judged by examining temperature data of nearby stations, surface weather charts, hourly temperature data, daily precipitation, and daily maximum wind direction. The number of detected errors in internal consistency check and spatial outlier check showed 4 days (3 stations) and 7 days (5 stations), respectively. Effective and objective methods for validation errors through this study will help to reduce manpower and time for conduct of quality management for temperature data.

• 한국잡초학회지
• /
• 제30권2호
• /
• pp.103-110
• /
• 2010

일년생 잡초인 물달개비 및 올챙이고랭이의 출아와 초기생장을 예측하기 위한 모델 구축을 위하여 온도조건을 달리한 식물생장상에서 포트실험을 수행하였다. 이들 잡초의 출아 및 초기생장과 유효적산온도와의 관계를 비선형회귀로 분석한 결과 온도조건에 상관없이 각각 Gompertz 모델 및 logistic 모델로 설명이 잘 되었다. 물달개비 및 올챙이고랭이의 최대 출아율의 50%에 필요한 유효적산온도는 각각 69.3 및 $94.8^{\circ}C$이었으며, 4엽기에 이르는데 필요한 유효 적산온도는 각각 247 및 $234^{\circ}C$이었다. 본 연구에서 개발된 모델로 분석한 결과 평균 기온이 $3^{\circ}C$ 상승하게 되면 이들 잡초의 50% 출아는 물달개비의 경우 1일, 올챙이고랭이의 경우는 2일 빨라지고, 4엽기에 다 다르는 날짜는 이들 잡초 모두 3일이 빨라질 것으로 예측되었다. 따라서 온도상승조건에서 물달개비 및 올챙이고랭이를 효과적으로 방제하기 위해서는 현재의 처리시기보다 약 2-3일 빨라져야 할 것으로 예상된다.