• Communications for Statistical Applications and Methods
• /
• 제6권3호
• /
• pp.967-976
• /
• 1999

In this paper we study the Hellinger distance based goodness-of-fit tests that are analogs of likelihood ratio tests. The minimum Hellinger distance estimator (MHDE) in normal models provides an excellent robust alternative to the usual maximum likelihood estimator. Our simulation results show that the Hellinger deviance test (Simpson 1989) based goodness-of-fit test is robust when data contain outliers. The proposed hellinger deviance test(Simpson 1989) is a more direcct method for obtaining robust inferences than an automated outlier screen method used before the likelihood ratio test data analysis.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.15-19
• /
• 2014

In this study, for 6-20 MeV electron beam energy occurring in a linear accelerator, the authors attempted to investigate the relation between the effective source-skin distance and the relation between the radiation field and the effective source-skin distance. The equipment used included a 6-20 MeV electron beam from a linear accelerator, and the distance was measured by a ionization chamber targeting the solid phantom. The measurement method for the effective source-skin distance according to the size of the radiation field changes the source-skin distance (100, 105, 110, 115 cm) for the electron beam energy (6, 9, 12, 16, 20 MeV). The effective source-skin distance was measured using the method proposed by Faiz Khan, measuring the dose according to each radiation field ($6{\times}6$, $10{\times}10$, $15{\times}150$, $20{\times}20cm^2$) at the maximum dose depth (1.3, 2.05, 2.7, 2.45, 1.8 cm, respectively) of each energy. In addition, the effective source-skin distance when cut-out blocks ($6{\times}6$, $10{\times}10$, $15{\times}15cm^2$) were used and the effective source-skin distance when they were not used, was measured and compared. The research results showed that the effective source-skin distance was increased according to the increase of the radiation field at the same amount of energy. In addition, the minimum distance was 60.4 cm when the 6 MeV electron beams were used with $6{\times}6$ cut-out blocks and the maximum distance was 87.2 cm when the 6 MeV electron beams were used with $20{\times}20$ cut-out blocks; thus, the largest difference between both of these was 26.8 cm. When comparing the before and after the using the $6{\times}6$ cut-out block, the difference between both was 8.2 cm in 6 MeV electron beam energy and was 2.1 cm in 20 MeV. Thus, the results showed that the difference was reduced according to an increase in the energy. In addition, in the comparative experiments performed by changing the size of the cut-out block at 6 MeV, the results showed that the source-skin distance was 8.2 cm when the size of the cut-out block was $6{\times}6$, 2.5 cm when the size of the cut-out block was $10{\times}10$, and 21.4 cm when the size of the cut-out block $15{\times}15$. In conclusion, it is recommended that the actual measurement is used for each energy and radiation field in the clinical dose measurement and for the measurement of the effective source-skin distance using cut-out blocks.

• 방사성폐기물학회지
• /
• 제18권1호
• /
• pp.51-62
• /
• 2020

본 연구는 감마스펙트럼 비율을 이용한 매립된 선원의 깊이 평가방법 개발 및 적용성 확인을 위해 진행되었다. 이를 위해 현장측정 HPGe 계측기 및 MCNP 전산모사를 이용하여 ¹³⁷Cs, ⁶⁰Co, ¹⁵²Eu 선원의 매질 내 깊이와 계측거리에 따른 Peak to Compton, Peak to Valley 비율(Q)의 변화를 평가하였다. 해당 결과를 이용해 계측거리 50 cm를 기준으로 PTV 및 PTC 비율(Q)과 매립 선원의 깊이 간의 상관 식을 도출하였다. 그리고 PTC 및 PTV 방법 이용 시 계측거리 변화에 따른 민감도를 평가한 결과, 50 cm 기준으로 계측거리가 20 cm로 감소할 경우 오차가 3 ~ 4 cm까지 증가하였다. 하지만 100 cm로 증가할 경우 계측거리에 의한 영향이 미미함을 확인하였다. 그리고 PTV 및 PTC 방법과 피크 영역의 계수율 변화를 통해 선원의 깊이를 평가하는 Two distance measurement 방법을 상호 비교하였다. 평가 결과 PTV 및 PTC 방법은 최대 1.87 cm의 오차, Two distance measurement 방법은 최대 2.69 cm의 오차를 나타내어 PTV, PTC 방법의 정확도가 비교적 높음을 확인하였다. 선원의 수평 방향 위치 변화 민감도 평가 결과 Two distance measurement 방법은 선원이 off-center 방향으로 30 cm 이동하였을 경우 최대 오차가 25.59 cm로 나타났다. 반면 PTV 및 PTC 방법은 최대 오차 8.04 cm로 현장 적용 시 높은 정확도를 나타낼 것으로 예상된다. 그리고 PTC 방법은 동일 시간 측정 시 다른 방법과 비교하여 낮은 표준편차를 나타내 신속한 평가가 가능할 것으로 기대된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.134-143
• /
• 2001

Viscous solutions of supersonic jet impinging on a flat plate normal to the flow are simulated using three-dimensional Navier-Stokes solver. The jet impinging flow structure exhibits such complex nature as shock shell, plate shock and Mach disk depending on the flow parameters. Among others, the dominant parameters are the ratio of the nozzle exit pressure to the ambient pressure and the distance between the nozzle exit plane and the impinging plane. In the present study, the nozzle contour and the pressure ratio are held fixed, while the jet impinging distance is varied to illuminate the characteristics of the jet plume with the distance. As the plate is placed close to the nozzle at 3D high, the computed wall pressure at or near the jet center oscillates with large amplitude with respect to the mean value. Here D is the nozzle exit diameter. The amplitude of wall pressure fluctuations subsides as the distance increases, but the maximum pressure level at the plate is achieved when the distance is about 4D high. The frequency of the wall pressure is estimated at 6.0 kHz, 9.3 kHz, and 10.0 kHz as the impinging distance varies from 3D, 4D, to 6D, respectively.

• 응용통계연구
• /
• 제25권6호
• /
• pp.1009-1018
• /
• 2012

Persistence homology (a type of methodology in computational algebraic topology) can be used to capture the topological characteristics of functional data. To visualize the characteristics, a persistence diagram is adopted by plotting baseline and the pairs that consist of local minimum and local maximum. We use the bottleneck distance to measure the topological distance between two different functions; in addition, this distance can be applied to multidimensional scaling(MDS) that visualizes the imaginary position based on the distance between functions. In this study, we use handwriting data (which has functional forms) to get persistence diagram and check differences between the observations by using bottleneck distance and the MDS.

• 한국시뮬레이션학회논문지
• /
• 제24권4호
• /
• pp.43-49
• /
• 2015

탐색기 적용 전술유도무기의 탐색기는 전술유도무기 개발 간 제한된 직경과 무게로 설계된다. 이러한 경우, 하드웨어 특성에 의해 탐색기 시야각, 분해능, 추적 알고리즘 등의 탐색기 성능에 제한이 존재하게 되고, 이로 인해 최대 표적포착 가능거리가 정해지게 된다. 장사거리용 전술유도무기의 경우 최대 표적포착 가능거리 이전까지는 INS 순수항법 또는 GPS/INS 통합항법으로 항법 유도비행을 수행하는데, INS 순수항법은 비행시간이 증가함에 따라 항법성능이 급격하게 감소하고, GPS/INS 통합항법의 경우 재밍상황에서 항법성능이 급격하게 감소한다. 본 논문에서는 앞서 언급한 최대 표적포착 가능거리와 항법장치 성능등 다양한 변수를 고려하여 전술유도무기 체계 관점에서 탐색기 영상 내 표적존재확률에 대해 분석할 수 있는 시뮬레이션을 수행하였다.

• 한국인터넷방송통신학회논문지
• /
• 제22권3호
• /
• pp.177-183
• /
• 2022

2차원 할당 문제는 다항시간 알고리즘이 알려지지 않은 NP-완전 문제이다. 본 논문은 위치간 거리가 일정하지 않은 랜덤형 2차원 할당 문제의 최적 해를 O(n²) 수행 복잡도로 찾을 수 있는 알고리즘을 제안하였다. 제안된 알고리즘은 위치 행렬 L에서의 최소 거리 합 위치 l_i와 시설 행렬 F에서의 최대 물동량 시설 f_j를 M={(l_i,f_j)}으로 매치키시고, M을 기준으로 최소 거리 합 l_i와 시설 행렬 F에서의 최대 물동량 시설 f_j의 매칭 쌍 (l_i,f_j)을 점진적으로 증대시키는 전략을 수행하고, 위치별 거리와 시설별 물동량 상관관계를 최적으로 반영하기 위해 시설들을 교환하는 전략을 적용하였다. 실험 데이터에 적용한 결과, 제안 알고리즘은 O(n²) 의 다항시간 알고리즘임에도 불구하고 메타휴리스틱 방법의 일종인 유전자 알고리즘의 해를 개선할 수 있었다.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.57-69
• /
• 2022

Recently, as interest in self-driving cars has increased worldwide, research and development on the Advanced Driver Assist System is actively underway. Among them, the purpose of Adaptive Cruise Control (ACC) is to minimize the driver's driving fatigue through the control of the vehicle's longitudinal speed and relative distance. In this study, for the research of the ACC test in the real environment, the real-road test was conducted based on domestic-road test scenario proposed in preceding study, considering ISO 15622 test method. In this case, the distance measurement method using the dual camera was verified by comparing and analyzing the result of using the dual camera and the result of using the measurement equipment. As a result of the comparison, two results could be derived. First, the relative distance after stabilizing the ACC was compared. As a result of the comparison, it was found that the minimum error rate was 0.251% in the first test of scenario 8 and the maximum error rate was 4.202% in the third test of scenario 9. Second, the result of the same time was compared. As a result of the comparison, it was found that the minimum error rate was 0.000% in the second test of scenario 10 and the maximum error rate was 9.945% in the second test of scenario 1. However, the average error rate for all scenarios was within 3%. It was determined that the representative cause of the maximum error occurred in the dual camera installed in the test vehicle. There were problems such as shaking caused by road surface vibration and air resistance during driving, changes in ambient brightness, and the process of focusing the video. Accordingly, it was determined that the result of calculating the distance to the preceding vehicle in the image where the problem occurred was incorrect. In the development stage of ADAS such as ACC, it is judged that only dual cameras can reduce the cost burden according to the above derivation of test results.

• 대한안전경영과학회지
• /
• 제26권3호
• /
• pp.71-82
• /
• 2024

In modern society, buildings are becoming more complex, and the population is becoming more densely populated. Such large buildings require a variety of evacuation measures, as there is a high possibility of large-scale human casualties due to increased evacuation distance and evacuation time in the event of a fire. Strobe light and exit sign light are used as important evacuation equipment to provide early warning and evacuation directions. In this thesis, we conducted a fire simulation assuming that a fire occurrence point notification function and a strobe light function were added to equipment such as visual alarms and evacuation guidance, and compared and analyzed the difference in evacuation completion time with existing equipment. The scenarios for the simulation were divided into "general fire situations" and "fire location and evacuation exit guidance situation" and the differences in evacuation completion time in the event of a fire were compared and analyzed for each floor from the 1st floor to the 3rd floor. The maximum travel distance to complete evacuation in the case of a fire on the first floor decreased by 80.6 m and the evacuation completion time decreased by 329.4 seconds, and the maximum travel distance to complete evacuation in the case of a second-floor fire decreased by 28.5 m and the evacuation completion time by 438.8 seconds. During the fire on the third floor, the maximum distance decreased until evacuation was completed to 3.4 m, and the evacuation completion time was reduced by 355.6 seconds. It is expected that if the congestion level of evacuation routes is reduced by utilizing the congestion level of evacuation exits when fire alarm systems and evacuation equipment are activated, the evacuation completion time will be further shortened and evacuations will be carried out quickly and safely.

• 한국항공우주학회지
• /
• 제30권4호
• /
• pp.92-98
• /
• 2002

본 논문에서는 반능동 레이더 미사일에 대해 다양한 발사 조건과 성능 제한 조건, 표적기의 기동 등을 고려하여 최대 발사 거리 및 F-pole을 산출하고 이를 비교 분석하였다. 또한, Head-On 대치 시 수행되는 일반적 회피 기동에 대해서도 고찰하였다. 표적기와 공격기, 미사일은 질점으로 모델링하였으며 미사일은 공력 성능, 기하학적인 형상, 성능 제한사항, 탐색 레이더의 짐발 제한 등 다양한 고려 요소들을 포함시켜 기존의 연구보다 현실적인 시뮬레이션을 수행하였다. 최대 사거리는 표적기와 미사일의 운동, 미사일의 성능 제한 조건들을 만족하면서 미사일이 추적할 수 있는 최대의 시간에 명중될 수 있는 거리로서 Root Finding Method를 사용하여 산출하였다. F-pole은 명중시 공격기와 표적기와의 거리로서 공격기는 표적기에 대해 추적 유도 방식을 수행하도록 지정하여 그 거리를 산출하였다.