• Journal of the Korean Data and Information Science Society
• /
• v.17 no.2
• /
• pp.335-344
• /
• 2006

The purpose of this paper is to apply data mining method for the inbound call center optimization. Data mining analysis is come to be used in order to predict the degree of difficulty on the consultation. It is the method of maximal efficiency for the call center that uses of the predicted degree of difficulty and customer grade as routing which hits to the skill of the consultation unit. This method is to get the possibility of efficiency for the call center with the maximum efficiency.

• Journal of the Korean Professional Engineers Association
• /
• v.19 no.4
• /
• pp.5-10
• /
• 1986

On SWS 41 Plates jointed by the F11T M 20 high strength bolts the study on stress behavior and safety degree until rupture in static tensile tests were performed. By these results, in case of no clamping force stress concentration was extremed for strain of about 10% higher ratio. Elastic strain occurred to change of test specimens depth by the load and plastic strain occurred to local minute sleep after elastic strain. compared shear stress with tension stress from the fracture load it was showned lower values than the maximum shear stress theory and stress strain energy theory.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.04a
• /
• pp.123-130
• /
• 1998

The probability of unseating failure of the bridge spans under earthquakes is investigated. Seismic excitations are simulated as nonstationary processes by combining a stationary process and an intensity function. For computational convenience, a simplified single-degree-of-freedom model is adopted, which retains the dynamic characteristics of the original brige motion in concern. The time history analysis for the developed single degree-of-freedom model are carried out to evaluate the response processes, and the probabilistic characteristics of response displacements are evaluated. The reliability analysis of the bridge against the unseating failure is performed with the statistical information of the maximum displacements of responses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3458-3464
• /
• 2009

This study was conducted to investigate the relationship between maximum oxygen uptake and its related factors including body measurement and vascular compliance. The subjects of our study were 43 males and 53 females aged 40 to 59 who were visited in military health center. The main results were that 1.the degree of obesity had significantly negative correlation to vascular compliance in male, and waist-hip ratio in female. 2. The degree of obesity, body mass index, waist-hip ratio and body fat percent had significantly negative correlation to maximum oxygen uptake in male, and waist-hip ratio & body fat percent in female. 3. Maximum heart rate had significantly positive correlation to maximum oxygen uptake in male, and vascular compliance & maximum heart rate in female. 4. In multiple regression analysis which maximum oxygen uptake was as dependent variable, body fat percent, vascular compliance and maximum heart rate were significant variables for both male and female. In conclusion, Maximum oxygen uptake of some rural people age 40 to 59 were affected by various factors such as body fat percent, vascular compliance, and maximum heart rate.

• Journal of East-West Nursing Research
• /
• v.11 no.1
• /
• pp.12-24
• /
• 2005

The objective of this research is to explore the attitude on the transfer of duty post and job satisfaction of nurses. The subjects of this study were 512 nurses who have engages in the K-university hospital. The measurement tool consisted of attitude on the transfer of duty post, job satisfaction. The collected data have been processed using SPSS/PC 12.0 program: The results of this study were as follows: 1. The age the subjects was from 21 to 56 and average 32, blow 3 years experience in current duty post occupied most by 37.1%. The experience of the transfer of duty post showed 50.2%. 51.4% of the nurses wanted $3{\sim}5$ years as the suitable periods for the transfer of duty post showing the highest degree of frequency. 2. The positive degree of the attitude on the transfer of duty post of the nurses appeared average (3.36) to maximum evaluation point 5, and when asked about 4 factors the nurses wanted individual development most by (3.72) while administration management was lowest by (2.65). The satisfaction degree on their job appeared to be average (3.06) to the maximum point 5, and when asked about 7 factors, interaction appeared to be the highest by (3.63), here we saw that interaction was the most important elevating factor of the job satisfaction degree. 3. In the relation of the attitude on the transfer of duty post according to general characteristics, there were the significant difference according to whether it is necessary for the current duty post and periodical duty post to be transferred. In the relation between general characteristics and job satisfaction degree there were the significant differences according to age, marital status, education, position of nurse, hospital clinical nursing experiences, satisfaction degree with current post and the hope of the transfer of duty post from current post. 4. The correlation between attitude on the transfer of duty post and job satisfaction degree was positive relation(r=0.137, p=.002), that the higher the degree of positive attitude on the transfer of duty post the higher the degree of job satisfaction.

• KIEAE Journal
• /
• v.9 no.4
• /
• pp.11-16
• /
• 2009

To act and respond to the climate changes and to bring about power-saving in buildings, the changes in the atmospheric data in Korea are recorded and assessed. For the two regions representative of Korea, the data obtained from HadCM3 and actual data are compared and analyzed so as to concretely evaluate and confirm the changes taking place in the cooling and heating degree days in Korea. For the past 40 years, from 1996 to 2005, the number of heating degree days was on the decline and in the two representative regions, between 1980's and 1990's, the number of decrease in the heating degree days had been quite large. The number of cooling degree days showed a trend of increase since the 1970's and just as in the case of heating degree days, the extent of increase was quite large between the 1980's and the 1990's. The results of comparison of the number of heating and cooling degree days, one obtained from the "Korea Meteorological Administration" and another from the HadCM3 data (E127.5,N37.5,E127.5,N35), which is one of the ways of predicting the climate, showed similar trends in the number of heating degree days in the Yeosu area. However, in the case of the number of heating degree days in Seoul and the number of cooling degree days both in Seoul and Yeosu, the differences in the number ranged from a minimum of 300 days to a maximum of 1500 days. This could be attributed to the grid points used in the HadCM3, the differences in the values of latitudes and longitudes of these two locations considered in this study, topographical differences, heat island effect caused by population density etc. and while using the HadCM3, these variables factors must be taken into consideration.

• Earthquakes and Structures
• /
• v.16 no.4
• /
• pp.487-499
• /
• 2019

Energy-based seismic design of structures has gradually become prominent in today's structural engineering investigations because of being more rational and reliable when it is compared to traditional force-based and displacement-based methods. Energy-based approaches have widely taken place in many previous studies and investigations and undoubtedly, they are going to play more important role in future seismic design codes, too. This paper aims to compute the maximum earthquake energy input to elastic single-degree-of-freedom (SDOF) systems for selected real ground motion records. A data set containing 100 real ground motion records which have the same site soil profiles has been selected from Pacific Earthquake Research (PEER) database. Response time history (RTH) analyses have been conducted for elastic SDOF systems having a constant damping ratio and natural periods of 0.1 s to 3.0 s. Totally 3000 RTH analyses have been performed and the maximum mass normalized earthquake input energy values for all records have been computed. Previous researchers' approaches have been compared to the results of RTH analyses and an approach which considers the pseudo-spectral velocity with Arias Intensity has been proposed. Graphs of the maximum earthquake input energy versus the maximum pseudo-spectral velocity have been obtained. The results show that there is a good agreement between the maximum input energy demands of RTH analysis and the other approaches and the maximum earthquake input energy is a relatively stable response parameter to be used for further seismic design and evaluations.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.75-81
• /
• 2003

In this paper, the study of effects of flow variables on flame structure and NOx emission concentration was performed in co-axial laminar partially premixed methane/air flames. the objectives are to reveal its effect as parameters were varied and to understand the correlation between flame structure and NOx emission characteristics in the reaction zone. equivalence ratio(${\Phi}$), fuel split degree(${\sigma}$), and mixing distance(x/D) were defined as a premixing degree and varied within $1.36{\sim}3.17$(equivalence ratio), $50{\sim}100$(fuel split degree), and $5{\sim}20$(mixing distance). the image of $OH{\ast}$ and $CH{\ast}$, and NOx concentration were obtained with an ICCD camera and a NOx analyzer. additionally the maximum intensity location of $OH{\ast}$ chemiluminescence and $CH{\ast}$ chemiluminescence were measured to compare each flame structures. In conclusion flame structure and NOx emission characteristics were changed from diffused to premixed flame when mixing degree was on the increase. the main effect on flame structure and NOx production was at first equivalence ratio(${\Phi}$), and next fuel split degree(${\sigma}$), and finally mixing distance(x/D).

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1989.10a
• /
• pp.46-50
• /
• 1989

Methods for the estimation of the coefficient matrices in the equation of motion for a linear multi-degree-of-freedom structure arc studied. For this purpose, the equation of motion is transformed into an auto-regressive and moving average with auxiliary input (ARMAX) model. The ARMAX parameters are evaluated using several methods of parameter estimation; such as toe least squares, the instrumental variable, the maximum likelihood and the limited Information maximum likelihood methods. Then the parameters of the equation of motion are recovered therefrom. Numerical example is given for a 3-story building model subjected to an earthquake exitation.

• Tribology and Lubricants
• /
• v.17 no.4
• /
• pp.297-306
• /
• 2001

Under the condition of variable density and specific heat, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined within some degree of Journal misalignment. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the condition of variable density and specific heat play important roles in determining friction and load of Journal bearing at high speed operation.