• Journal of the Korean Society of Visualization
• /
• v.19 no.3
• /
• pp.15-21
• /
• 2021

In this study, we investigated the dynamics of a droplet impacting rough hydrophobic surfaces through high-speed imaging. Micrometer-sized structures with grooves and pillars were fabricated on smooth Polydimethylsiloxane (PDMS) surfaces by laser ablation. We used Newtonian and non-Newtonian liquid droplets to study the drop impact dynamics. De-ionized water and aqueous glycerin solutions were used for the Newtonian liquid droplet. The solutions of xanthan gum in water were prepared to provide elastic property to the Newtonian droplet. We found that the orientation of the surface structures affected the maximal spreading diameter of the droplet due to the degree of slippage. During the droplet retraction, the dynamic receding contact angles were measured to be around 90° or less. It resulted in the formation of the micro-capillary bridges between the receding droplet and the surface structures. Then, the rupture of the capillary bridge led to the formation of micrometer-sized droplets on top of the surface structures. The size of the microdroplets was found to increase with increasing the impacting velocity and viscosity of the Newtonian liquid droplets. However, the size of the isolated microdroplets decreased with enhancing the elasticity of the droplets, and the size of the non-Newtonian microdroplets was not affected by the impacting velocity.

• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.737-747
• /
• 2001

Regeneration of Periodontium with PRP does not only improve regeneration rate and density of bone but have a possibility to estimate faster healing process for soft tissue. And also, synthetic bone and xenogenic bone graft are effective on regeneration of periodontium. The purpose of this study is to evaluate the effectiveness of synthetic bone ($Biogran^{(R)}$) and xenogenic bone ($BBP^{(R)}$) grafts with the PRP technique on regeneration of periodontium. 52 Generally healthy Pt. who had pocket depth 5mm at any of 6 surfaces of the teeth were in the study at Dept. of Perio. in Dankook Dental Hospital. Open Flap was treated for 18 infra-bony pockets as control group, $Biogran^{(R)}$ with PRP was inserted for 25 infrabony pockets as first test group, and $BBP^{(R)}$ with PRP was inserted for 22 infrabony pockets as 2nd test group. Then evaluation was made after 3 and 6 months 1. 6 months after surgery, each difference of average probing pocket depth was $2.61{\pm}0.23$ for control, $3.40{\pm}0.30$ for 1st test, and $3.45{\pm}0.37$ for 2nd test group. 2. 6 months after surgery, each difference of clinical probing attachment level was $1.39{\pm}0.12$ for control, $2.88{\pm}0,24$ for 1st, and $2.86{\pm}0,27$ for 2nd test group. 3. 6 months after surgery, each difference of Maximal probing attachment level was $1.11{\pm}0.16$ for control, $3.28{\pm}0.30$ for 1st, and $3.27{\pm}0.35$ for 2nd test group. 4. There were significant differences for clinical change of each three group which were between average probing pocket depth and clinical attachment level of 3,6 months and minimal and maximal attachment level after 6 months 5. There were significant differences for average probing pocket depth which were only at control group and 2nd test group between 1 and 6months. For clinical attachment level and minimal and maximal proving attachment level, there was a significant difference after 6month of surgery. 6. There was no significant difference between two test groups for average probing depth, clinical attachment level, and minima1 and maximal probing attachment level. As the result, PRP with bone graft is very effective for regeneration of periodontium and there is no difference between xenogenic bone and synthetic bone.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.875-883
• /
• 1999

서로 다른 기하학적 모델링 시스템에 사용되는 곡선 및 곡면의 자료 교환에서, 시스템이 지원하는 그 곡선 및 곡면의 최대 차수에 제한이 있을 때, 낮은 차수로의 차수 감소가 필요하다. 본 논문에서는 근사 변환에 의한 B-spline 곡선의 차수 감소 방법을 제시한다. 기존의 Bzier 곡선의 차수감소 방법들을 적용하고, 그 방법들을 비교 분석한다. B-spline 곡선의 knot 제거 알고리즘이 자료 감소를 위해 차수 감소 과정에 적용된다.Abstract The degree reduction of B-splines is required in exchanging parametric curves and surfaces of the different geometric modeling systems because some systems limit the supported maximal degree. We propose an approximate degree reduction method of B-spline curves using the existing Bzier degree reduction methods. Knot removal algorithm is used to reduce data in the degree reduction process.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.35-44
• /
• 2005

The degree reduction of B-splines is necessary in exchanging parametric curves and surfaces of the different geometric modeling systems because some systems limit the supported maximal degree. In this paper, We provide an our experimental results in approximate conversion for B-splines apply to degree reduction. We utilize the existing Bezier degree reduction methods, and analyze the methods. Also, knot removal algorithm is used to reduce data in the degree reduction Process.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.1
• /
• pp.7-12
• /
• 2003

Because some systems limit the supported maximal degree, the degree reduction of NURBS is necessary in Parametric curves and surfaces of the different geometric modeling systems. Therefore an approximate degree reduction method of NURBS curves was introduced in this research. Also the existing Eck's B$\'{e}$zier degree reduction method and knot removal algorithm were used to reduce data in the degree reduction process. Finally we found that this method was stable, efficient for implementations, and easy to use algorithms.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.3
• /
• pp.17-25
• /
• 2016

Purpose : This study attempts to examine the effect of the balance exercise on the unstable surfaces for the vital capacity in healthy adults. Methods : A total of 13 subjects was randomly divided into a breathing exercise training group (n=7) and a breathing and balance exercise training group (n=6). Changes in vital capacity and respiratory muscle activity were measured before and after the intervention. The intervention was performed three times a week for four weeks. Forced vital capacity (FVC), forced expiratory volume at one second (FEV1) and maximal voluntary ventilation (MVV) were used as measurement tools for the vital capacity test. Electromyography (EMG) was also used to examine respiratory muscle activity. Result : The breathing exercise training group showed significant improvement in terms of FVC, FEV1 and external oblique (EO), and transverse abdominis/internal oblique (TrA/IO) of MVV. The breathing and balance exercise training group showed significant improvement in terms of FVC, MVV and EO, TrA/IO of FVC and rectus abdominis (RA), EO, and TrA/IO of MVV. However, in comparing changes in vital capacity and respiratory muscle activity before and after the training, the breathing exercise training group and the breathing and balance exercise training group showed a significant difference in terms of MVV. Conclusion : This study is as a preliminary study to find out the relation between a balance exercise and a vital capacity, it is considered to require a further study with several revisions of subjects, duration and time for an intervention.

• ALGAE
• /
• v.24 no.2
• /
• pp.93-104
• /
• 2009

Imaging-PAM fluorometry was used to assess the chlorophyll a fluorescence parameter ${\Phi}_{PSII}$ (effective quantum yield) in Frcus vesiculosus. F. disttchus. ssp. distichus and AscophyIIum nodosum. The objective was to show variadon in fluorescence yield associated with age and frond organ, and to illustrate the spatial scales at which photosynthetic parameters vary on fucoid thalli. In addition, our species represented taxa in different but related genera, species with different ecoloeies (rock pool and non rock pool species), morphologies (with and without air bladders) and longevities (several to 20 or more years). A further objective was to determine the extent to which photosynthetic parameters reflected these differences- Effective quantum yield declined substantially with age in F. vesiculosus and F. distichus ssp. distichus, whereas ${\Phi}_{PSII}$ in A. nodosum was maximal after three years. In A. nodosum ${\Phi}_{PSII}$ was still high in branch segments at least seven years old. Older branches of A. nodosum showed relatively higher and more homogeneous photosynthetic capacity relative to Fucus species. Surfaces of air bladders in A. nodosum and F. vesicu- losus had ${\Phi}_{PSII}$ that was not significantly different from the highest rates, achieved in these species. The heterogene- ity of photosynthetic efficiency is consistent with morphological and developmental differences among the species and their ecology. in particular the longevity of A. nodosum fronds.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.1
• /
• pp.73-84
• /
• 2010

This paper is to analyze effectiveness and efficiency of topographic features in visibility analysis. For this research aim, this paper compares the analysis results of topographic features and relationships between topographic features and their visibility analysis on surfaces. This paper employs peak, pass, pit, ridge and valley features from the topographic features for which five areas including mountain and plain areas in Britain are selected and their DEM data are generated. The summaries of the analysis results are as follows: Firstly, it is clear that relationship between high elevation points and their visibility is not highly correlated. This means that highly elevated points are not necessarily better visible areas and they are not suitable for searching for large visible areas. Secondly, the positions that can see large visible areas are highly correlated with their elevation and are distributed within a certain range which has small deviation of their correlation between visibility and elevation. This means that to search for large visible areas, it is necessary to employ the positions located at relatively high elevation area. Thirdly, for all of the five areas, the visibility results of the topographic features are compared with maximal visibility resulted from a while surface areas, and it is identified that topographic features show similar visibility performances of that maximal visibility. From the results stated above, it can be inferred that topographic features and its topographic characteristics are enable to be a research motivation to the visibility analysis topics. Furthermore, the results of this paper can be contributed to explore suitable variables and factors for solving multiple viewshed problems.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.185-194
• /
• 1995

The purpose of this study was to estimate primary diagnosis, prediction of prognosis and recognition fo treatment progress for treatment of TMD patients through measuring the various ranges of mandibular movement in normal and TMDs patients using Mandibular Kinesiograph K-6 Diagnostic system. In normal groups, 20 adults were selected, who have normal or class I molar relationship, and have no symptoms on TMJ and masticatory muscles, and have restorations less than 3 surfaces on each tooth, and have no other prosthetic restoration. In Patients group, we selected 31 outpatients who were confirmed to TMDs with clinical examination and radiographic findings. The obtained results were as follows : 1. In maximal opening, patient group was showed the limitation of vertical movement range (P<0.01) and lager lateral deviation than in normal group (P<0.05). And actual dimensional displacement of opening was calculated larger in normal group (P<0.05). 2. In protrusive movement, patients group was showed the limitation of anteroposterior movement range (P<0.001) and larger deviation than in normal group (P<0.01). And actual 3 dimensional displacement of protrusion was calculated larger in normal group (P<0.001). 3. In lateral maximum excursion, compared with normal group patient group was no significant differences to affected side, but was showed the limitation of lateral movement to unaffected side (P<0.001). 4. There was no significant difference in movement velocity of opening and closing in both groups. 5. Mandibular movement from physiologic rest position to centric occlusion was moved more anteroposteriorly in patient group. 6. Mandibular movement from centric relation to centric occlusion was no significant difference in both groups.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.195-204
• /
• 1995

The purpose of this study was to evaluate effect of head posture change on initial occlusal contacts through measuring the distances between initial occlusal contacts and maximum intercuspal position at different head posture. Two special devices were designed and constructed. Mandibular movement replicator was used to assess reliability of the K6 diagnostic system(MKG; Myo-tronic Inc, Seatle, USA) and head posture calibrator was used to maintain the constant head posture during experiment. We measured difference of distance between initial occlusal contact and maximum intercuspal position with MKG in upright, supine, 45 degrees extension, 30 degrees flexion, 30 degrees right and left bending postion of the head. The Frankfurt horizontal plane was used as a reference plane. 21 adults aged from 23 to 25 were selected, who have normal or class I molar relationship, and have no symptoms on TMJ and masticatory muscles, and have restorations less than 3 surfaces on each tooth, and have no other prosthetic restoration. The obtained results were as follows : The mean absolute distances between initial occlusal contact and maximum intercuspal postion were 0.39(0.18mm in the upright position, 0.65(0.37mm in the supine position, 0.59(0.33mm in the 45 degree extension, 0.70(0.53mm in the 30 degrees flexion, 1.12(1.10mm in the 30 degrees right bending and 1.94(0.67mm in the 30 degrees left bending of the head. The positions of the initial occlusal contacts have a tendency to locate anterior, left and inferior to maximal intercuspal position in upright position, posterior and inferior in supine position and 45 degrees extension, anterior and inferior in 30 degrees flexion, right and inferior in 30 degrees right bending, and left and inferior in 30 degrees left bending of the head. There were significant differences among the initial occlusal contacts in each head postures(P<0.0001). Therefore, we need to check initial occlusal contacts in the altered head posture during occlusal analysis and adjustment of occlusal appliance and dental occlusion for diagnosis and treatment of temporomandibular disorder.