• 대한두개안면성형외과학회지
• /
• 제10권2호
• /
• pp.131-134
• /
• 2009

저자들은 보편적으로 보존치료가 불가능 하여 관혈적 정복술이 필요한 하악의 관절돌기골절 증례에서 당뇨, 고혈압의 병력, 고령으로 인한 절개 및 박리, 전신마취 시간증가로 발생할 수 있는 합병증을 줄이기 위해 우선적으로 시행한 형광투시하의 비관혈적 도수정복만으로 정확한 정복에 성공할 수 있었고 이후 골 유합까지 유지하여 만족스런 결과를 얻었기에 보고하는 바이다.

• The Journal of Advanced Prosthodontics
• /
• 제11권6호
• /
• pp.324-330
• /
• 2019

PURPOSE. The aim of the study was to evaluate and compare the fracture resistance and modes of fracture of monolithic zirconia crowns with two preparation designs. MATERIALS AND METHODS. Forty human maxillary first premolar teeth were extracted for orthodontic purposes and divided into two main groups (n=20): Group A: monolithic traditional zirconia; Group B: monolithic translucent zirconia. The groups were further subdivided into two subgroups (n=10): (A1, B1) shoulder margin design; (A2, B2) feather-edge margin design. Teeth were prepared with either a 1 mm shoulder margin design or a feather-edge margin design. The prepared teeth were scanned using a digital intraoral scanner. The crowns were cemented using self-adhesive resin cement. All cemented teeth were stored in water for 7 days and thermocycling was done before testing. All samples were subjected to compressive axial loading until fracture. The fractographic analysis was done to assess the modes of fracture of the tested samples. RESULTS. The highest mean values of fracture resistance were recorded in kilo-newton and were in the order of subgroup A1 (2.903); subgroup A2 (2.3); subgroup B1 (1.854) and subgroup B2 (1.523). One-way ANOVA showed a statistically significant difference among the 4 subgroups. Concerning modes of fracture, the majority of samples in subgroups A1 and B1 were fracture of restoration and/or tooth, while in subgroups A2 and B2, the majority of samples fractured through the central fossa. CONCLUSION. Even though all the tested crowns fractured at a higher level than the maximum occlusal forces, the shoulder margin design was better than the feather-edge margin design and the monolithic traditional zirconia was better than the monolithic translucent zirconia in terms of fracture strength.

• 대한치과보철학회지
• /
• 제49권1호
• /
• pp.80-86
• /
• 2011

임플란트 인접치아가 심한 치아우식이나 파절 등으로 인해 치관부의 잔존 치질이 손상된 경우 인위적 맹출술을 이용한 치관연장술은 임플란트와 인접한 치조골과 치간 유두의 보존으로 심미적인 보철 치료를 가능하게 한다. 54세 남자 환자분이 상악 전치부 고정성 보철물의 탈락으로 새로운 보철 치료를 주소로 내원하셨다. 상악 우측 중절치는 경도의 치아우식만 보였고 상악 우측 견치는 치관부 치질이 대부분 소실되어 있었다. 상악 우측 측절치의 결손부는 골 이식을 동반한 임플란트 식립을 시행하였고, 상악 우측 견치는 1달간 인위적 맹출술을 통한 치관연장술을 시행하였다. 임플란트 식립 5개월 후 2차 수술을 시행하였고, 임시치아의 단계적 수정을 통한 치은 성형 후 상악 우측 중절치, 상악 우측 측절치, 상악 우측 견치 각각 금속-도재관으로 수복하여 만족할 만한 임상결과를 얻을 수 있었다.

• 대한소아치과학회지
• /
• 제36권2호
• /
• pp.288-292
• /
• 2009

치관-치근 파절(crown-root fracture)은 법랑질, 상아질, 백악질에 파급된 파절이며 치수노출을 수반하는 것과 수반하지 않는 것이 있다. 치근부위만 파절된 경우와 달리 치관-치근 파절의 경우 치수와 치주조직을 통해 세균감염이 발생하기 때문에 치유를 기대하기 힘들다. 파절은 치근을 따라 다양한 부위에서 일어나기 때문에 치료방법은 파절 정도에 따라 결정된다. 치근의 파절선이 치관부에 근접 한 경우 느슨한 치아 파절편을 제거 한 후, long junctional epithelium이 형성되도록 치은을 노출된 상아질에 맞게 적합시키거나, 외과적으로 파절 부위를 노출시키거나, 교정적 또는 외과적으로 치아를 정출시키는 방법 등을 고려해 볼 수 있지만 파절선이 깊은 경우 발치가 일반적이다. 그러나 최근 논문에서 수직 치관-치근 파절된 치아에 대해 발치대신 레진으로 파절선을 수복한 후 재식하여 성공한 사례가 발표되었다. 이 방법으로 치아를 보존할 수 있으며 이러한 방법이 전치 부에서는 예후가 좋다고 보고되었다. 본 증례에서는 외상으로 인하여 상악중절치의 치관-치근 파절이 발생한 10세 환아에서 해당 치아를 발치하여 레진으로 파절부위를 재부착한 후 재식하였다. 그러나 18개월간 주기적으로 관찰한 결과 문헌에서와 같은 좋은 결과를 나타내지는 않았다.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.181-188
• /
• 2020

PURPOSE. The effect of core design on the fracture resistance of zirconia-lithium disilicate (LS2) bilayered crowns for anterior teeth is evaluated by comparing with that of metal-ceramic crowns. MATERIALS AND METHODS. Forty customized titanium abutments for maxillary central incisor were prepared. Each group of 10 units was constructed using the same veneer form of designs A and B, which covered labial surface to approximately one third of the incisal and cervical palatal surface, respectively. LS2 pressed-on-zirconia (POZ) and porcelain-fused-to-metal (PFM) crowns were divided into "POZ_A," "POZ_B," "PFM_A," and "PFM_B" groups, and 6000 thermal cycles (5/55 ℃) were performed after 24 h storage in distilled water at 37 ℃. All specimens were prepared using a single type of self-adhesive resin cement. The fracture resistance was measured using a universal testing machine. Failure mode and elemental analyses of the bonding interface were performed. The data were analyzed using Welch's t-test and the Games-Howell exact test. RESULTS. The PFM_B (1376. 8 ± 93.3 N) group demonstrated significantly higher fracture strength than the PFM_A (915.8 ± 206.3 N) and POZ_B (963.8 ± 316.2 N) groups (P<.05). There was no statistically significant difference in fracture resistance between the POZ_A (1184.4 ± 319.6 N) and POZ_B groups (P>.05). Regardless of the design differences of the zirconia cores, fractures involving cores occurred in all specimens of the POZ groups. CONCLUSION. The bilayered anterior POZ crowns showed different fracture resistance and fracture pattern according to the core design compared to PFM.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.207-217
• /
• 2003

The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the incisal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ}$, $8^{\circ}$, $12^{\circ}$) of the lower central ncisor. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and a universal testing machine was used to measure the fracture strength. The results of this study were as follows : The fracture strength of the ceramic crown with 2.0mm depth and $12^{\circ}$ inclination was the highest (648 N). Crowns of 1.5mm depth and $4^{\circ}$ inclination had the lowest strength (482 N). There were no significant differences of the fracture strength by axial inclination in same incisal depth group. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin irrespective of incisal depth. There had correlation between fracture strength and fractured surface area.

• 대한두개안면성형외과학회지
• /
• 제20권6호
• /
• pp.347-353
• /
• 2019

Most orbital surgeons believe that it's difficult to restore the primary orbital wall to its previous position and that the orbital wall is so thin that cannot be firmly its primary position. Therefore, orbital wall fractures generally have been reconstructed by replacing the bony defect with a synthetic implant. Although synthetic implants have sufficient strength to maintain their shape and position in the orbital cavity, replacement surgery has some drawbacks due to the residual permanent implants. In previous studies, the author has reported an orbital wall restoring technique in which the primary orbital wall fragment was restored to its prior position through a combination of the transorbital and transantral approaches. Simple straight and curved elevators were introduced transnasally to restore the orbital wall and to maintain temporary extraorbital support in the maxillary and ethmoid sinus. A transconjunctival approach provided sufficient space for implant insertion, while the transnasal approach enabled restoration of the herniated soft tissue back into the orbit. Fracture defect was reduced by restoring the primary orbital wall fragment to its primary position, making it possible to use relatively small size implant, furthermore, extraorbital support from both sinuses decreased the incidence of implant displacement. The author could recreate a natural shape of the orbit with the patient's own orbital bone fragments with this dual approach and effectively restored the orbital volume and shape. This procedure has the advantages for retrieving the orbital contents and restoring the primary orbital wall to its prior position.

• Restorative Dentistry and Endodontics
• /
• 제37권2호
• /
• pp.110-113
• /
• 2012

본 증례의 편측성 하악 과두 골절 환자는 외상 후 1개월간 다수의 상악 전치부 치아 외상이 간과되어 교합이 붕괴된 상태로 내원하였다. 변위된 상악 전치부 치아들의 외과적 정복 후 지속적인 기능 운동을 진행하여, 10개월 후 정상 교합 및 하악 과두 골절부의 골유합이 확인되는 양호한 결과를 얻을 수 있었다.

• 대한두개안면성형외과학회지
• /
• 제21권6호
• /
• pp.384-386
• /
• 2020

This report describes osteotomy and iliac bone graft for malunion caused by failed mandibular fracture reduction. A 27-year-old man was referred 3 months after a motor vehicle accident. At another hospital, two operations had been performed for symphyseal fracture using two resorbable plates. Malocclusion was noted, and panoramic radiography and computed tomography revealed a misaligned dental arch, with a 9.37-mm gap between the central and the lateral incisor of the left mandible. A wafer was made from the patient's dental model, and a maxillary arch bar was applied. Through a lower gingivolabial incision, osteotomy was performed between the malunited symphyseal fracture segments. Both segments were reduced to their original position using the wafer and fixed with titanium miniplates via intermaxillary fixation (IMF). The intersegmental gap was filled with cancellous bone from the iliac crest. The gingival defect was covered with a mucosal transposition flap from the gingivolabial sulcus. IMF and the wafer were maintained for 5 and 9 weeks, respectively. At postoperative week 13, the screws were removed from the mandible and satisfactory occlusion was noted. His mouth opening improved from 2.5 to 3 finger breadths (40 mm). This case demonstrates the need for sufficient IMF when using resorbable plates.

• 대한두개안면성형외과학회지
• /
• 제23권6호
• /
• pp.269-273
• /
• 2022

Naso-orbito-ethmoidal (NOE) fractures are complicated fractures of the mid-face. The treatment of NOE fractures is challenging and a comprehensive treatment strategy is required. We introduce a case of NOE fracture treated with open reduction and suspension sutures. A 28-year-old woman presented with a unilateral NOE fracture. To reduce the frontal process of the maxilla, a suspension suture was made by pulling the fragment using a double arm suture via a transcaruncular incision. The suture thread was placed in the horizontal plane. Another suspension suture on the inferior orbital rim assisted reduction procedure, and they passed through the overlying skin. The reduction alignment could be finely adjusted by tightening the transcutaneous suture threads while checking the degree of bone alignment through the subciliary incision. The two suture threads were suspended using a thermoplastic nasal splint. An additional skin incision on the medial canthal area, which would have resulted in a scar, could be avoided. Four months postoperatively, computed tomography showed an accurate and stable reduction. The patient was satisfied with her aesthetic appearance, and functional deficits were not present.