• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.50-57
• /
• 2017

Recently, safety-critical aviation system development programs promoted domestically have been terminated in the middle stage or they have not been put to practical use at the final stage. The program failure may be caused by various factors, but this study focused on imperfect test and evaluation(T&E) procedures. In general, T&E process of a safety-critical system must be distributed throughout the entire life-cycle of the system, have a continuity in phases, and can be implemented in a variety of ways depending on the maturity of the system development and acquisition strategy. This paper aims to present a new strategy by analyzing the domestic and overseas T&E processes to reduce the risk of domestic safety-critical CNS/ATM system development program and increase the success rate of program. First, we discuss the verification and validation techniques for safety-critical systems, analyze the T&E procedures of advanced institutes and the domestic situation, and then compare the domestic and overseas T&E processes to complement the imperfect testing procedure.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.195-203
• /
• 2021

This is descriptive research aimed at determining the relations with appearance satisfaction and self-efficacy in controlling job-seeking stress and at providing basic data necessary to decide on an education direction for better career maturity and explore psychological resources. For data collection, convenience sampling was performed among dental hygiene students consenting to participate in the research in Chungcheong and Jeolla Provinces to complete a self-administered questionnaire from November 25 to December 13, 2019. Appearance satisfaction was positively correlated with self-efficacy and was negatively correlated with job-seeking stress; self-efficacy was negatively correlated with job-seeking stress. The factors affecting job-seeking stress were self-efficacy, appearance satisfaction, and major satisfaction. It would be necessary to develop a practical counseling program targeting the combination of positive appearance acceptance and improvement in self-efficacy on the basis of correct aesthetic values with the objective of reinforcing job-seeking competence intensively among dental hygiene majors.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.4
• /
• pp.789-807
• /
• 2007

Technology Readiness Levels were initially proposed by NASA in 1995. TRL's definition and range were modified within adopted feilds such as hardware and software products. Many national R&D programs have similar evaluation conditions. However, they are influenced by the experts' ability. Relatively, they have shown the little reliance and the low performance of the developed prototype and technology. The purpose of this study is to apply the TRL to the materials and components development program. We defined TRLs for the program and devided them in three technology fields. Proposals, which were submitted for the program in 2007, were assessed with our TRL definitions for the study on the applicability. As a result, we could understand the characteristic TRLs of the technical proposals to the materials and components development program. This shows that the objective tools such as TRLs are required as the R&D program management factors. For the sake, it is the important factor that the detail directives to assess TRL should be developed according to the branches of industrial technology fields.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.85-105
• /
• 2021

In this study, a case study was conducted on Advanced Nano Products Co.,Ltd, a company that was established in 2000 and has the core technology to produce and commercialize nano materials and ultrafine nano powders based on nano technology. Deviating from the general case study, a case study analysis frame was set based on the theory of technology management and industry-university cooperation theory, and cases were analyzed. In this case study, Advanced Nano Products Co.,Ltd. was analyzed from two analytical perspectives: the establishment of a Management Of Technology system within the company and the Industry-Academic Cooperation activity. Based on this theoretical-based analysis framework, company visit interviews and related data research and analysis were conducted. As a result of the study of the case company, it was possible to derive how the technology management and industry-university cooperation affect the growth stage of the company as follows. First, the strategic use of technology management is an important factor in strengthening the competitive advantage and core competencies of venture companies, and for survival and growth of startups in the early stages. Second, strategic use of technology management and patents and establishment of a patent management system are a part of business strategy and play a pivotal role in corporate performance. Third, the human and material infrastructure of universities affects the growth of companies in the early stage of start-up, and the high utilization of industry-university cooperation promotes the growth of companies. Fourth, continuous industry-academic cooperation activities in the growth and maturity stages of a company's growth stage are the basis for activating external exchanges and building networks. Lastly, technology management and industry-university cooperation were found to be growth factors for each growth stage of a company. In order for a company to develop continuously from the start-up to the growth and maturity stages, it is necessary to establish a technology management system from the beginning and promote strategic technology management activities. In addition, it can be said that it is important to carry out various industry-academic cooperation activities outside the company. As a result of the case analysis, it was found that Advanced Nano Products Co.,Ltd, which performed these two major activities well, overcame the crisis step by step and continued to grow until now. This study shows how the use of technology management and industry-academic cooperation creates value in each growth stage of technology-based venture companies. In addition, its active use will play a big role in the growth of other venture companies. The results of this case study can be a valid reference for growth research of technology start-up venture companies and related field application and utilization.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.81-91
• /
• 2010

IMO(International Maritime Organization) and the Shipping World rave complied with various kinds of international regulations for maritime safety and marine environmental protection, but the main reason of maritime accidents is that developing countries cannot implement maritime safety related regulations. Although Korea has been a member of the "A group" council of IMO, maritime technology transfer records of Korea are not good. To promote the project of official development assistance in Korea, it is required to select the technology which has a high degree of importance in the fields of maritime safety and has a high degree of demand on the transfer to developing countries, and to concentrate on the selected technology. So, it is necessary to draw valuation factors for maritime safety technology and to decide the priority in order among maritime safety technologies on the basis of valuation factors. Because the weights which show the degree of importance among valuation factors are different from factor to factor, interdependent relationship between factors should be considered on evaluation. In this study, the valuation factors were divided into three groups as the maturity of maritime safety technology, the promotion probability of projects and the degree of importance of technology, and the detailed factors of each group were drawn. A model which used Fuzzy AHP and limiting probability to consider the weights of importance and correlation among valuation factors was developed. To adopt this model, nine types of maritime safety technology in the field of maritime safety information were selected and points were scored for each technology through evaluation. In conclusion, first, ENC related technology was scored to be the highest as 0.0139. Second, the point of ship monitoring technology was scored as 0.0133. Last, oil spill response technology was scored as 0.0132.

• Journal of Nutrition and Health
• /
• v.31 no.9
• /
• pp.1446-1456
• /
• 1998

Bones are important parts in sustaining the shape of the body, but they are also metabolic organs which undergo bone remodeling by constant bone resorption and formation. Osteoporosis, the typical metabolic bone disease, is characterized by a reduction in bone mineral density (BMD). Women more than men are at risk fir osteoporosis-related fractures, especially in the lumbar spine, wrist, and hip region. Risk of fracture depends on one's BMD, which open determined by the peak bone mass value achieved at skeletal maturity and followed by subsequent age-and menopause-related bone loss. Genetic and environmental factors are known to play a key role in bone metabolism and diet is considered as one of the important environmental factors. The purpose of the present study was to assess the status of BMD and bone mineral content(BMC) to clarify the relationships between dietary intakes and the risk of osteoporosis in adult women in Taegu. Subjects were 130 healthy females in between 20 and 69 years of age. BMD and BMC of the lumbar spine(venebrae L2-4) of the subjects were measured by dual energy X-ray absorptiometry. The average age of the subjects was 47.4${\pm}$11.7 years old, the average weight was 57.2${\pm}$8.4kg, the average age of menarche was 16.6${\pm}$1.9 years old and the average age of menopause was 48.4${\pm}$5.3 years old. The nutrient intakes of the subjects measured by the convenient method were generally lower than the level of RDA. The result of nutrient intake assessed has shown that the average energy intake was 1701${\pm}$316kca1 which is 85.1% of the RDA and the average calcium intake was 485.4${\pm}$172.3mg which is 69.3% of the RDA. The intakes of protein, vitamin A, vitamin B$_1$, niacin were greater than the RDA, whereas the remaining nutrient intakes were lower than the RDA. The average BMD of the subjects was shown to be 1.06${\pm}$1.09g/$\textrm{cm}^2$. The highest BMD of 1.24${\pm}$0.14g/$\textrm{cm}^2$ was noticed in the subjects of 30s compared to 20s, 40s, 50s, 60s. The BMD values were compared by the relative body weight(R3W) of the menopause subjects, and it was found that the underweight group had significant lower BMB while the rest of the groups did not have any differences in BMD. The most strongly correlated nutrient with BMD among the menopause subjects appeared to be calcium. The women whose Ca intakes were higher than 500mg showed the significantly higher BMD than those with Ca intakes lower than 500mg. This study suggests that the most effective way to prevent osteoporosis and to reduce the incidences of fractures seems to be minimizing bone loss through the adequate intake of calcium as well as avoiding underweight, especially in menopausal women. (Korean J Nutrition 31(9) . 1446-1456, 1998)

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2009

Watermelons (Citrulus vulgaris Schrad) are usually sorted manually by weight, appearance, and acoustic impulse, so grading of maturity and internal quality is subject to inaccuracies. It was necessary to develop a nondestructive evaluation technique of internal watermelon quality to reduce human error. Thus, acoustic characteristics related to internal quality factors were analyzed. Among these factors, three (ripeness, presence of an internal cavity, and blood-colored flesh) were selected for evaluation. The number of peaks and the sum of peak amplitudes for watermelons with blood-colored flesh were lower than for normal fruits. The portable evaluation system has an impact mechanism, a microphone sensor, a signal processing board, an LCD panel, and a battery. A performance test was conducted in the field. The internal quality evaluation model showed 87% prediction accuracy. Validation was conducted on 72 samples. The accuracy of quality evaluation was 83%. The quality of samples was evaluated by an inspector using conventional methods (hitting the watermelon and listening to the sounds), and then compared with prototype results. The quality evaluation accuracy of the prototype was better than that of the inspector. This nondestructive quality evaluation system could be useful in the field, warehouse, and supermarket

• Korean Journal of Poultry Science
• /
• v.27 no.2
• /
• pp.115-132
• /
• 2000

Eggshell strength and eggshell pigmentation are described in this paper since these are needed for quality egg production. A strong eggshell is determined by the components of the shell (cuticle, true shell and membranes) as well as the proper function of the gastrointestinal tract, the shell gland, the Kidneys and the endocrine system. When the puller reaches sexual maturity, the medullary bone must be ready for the laying hen at the peak egg shell formation. The amount of calcium in the layer diet, sources of calcium feed, the ratio of calcium and phosphorus in the layer diet, adequate levels of vitamin D and the dietary mineral (electrolyte) balance in the body fluid are important factors along with the levels of other nutrients. Biological, environmental and managerial factors such as the age of laying flock, temperature and humidity of the hen house, bird strain, disease, egg collection through transportation and others and influence the shell breakage at various stages of movement of the eggs from the producer to the consumer. The pigments present in eggshells are protoporphyrin-Ⅸ, biliverdin-Ⅸ and its zinc chelate and occasional traces of coproporphyrin-Ⅲ. However, there are several causes of changes in eggshell pigmentation such as the age of hen, disease, drugs and surface defects due to abnormal post-cuticular deposits.

• International Commerce and Information Review
• /
• v.7 no.4
• /
• pp.387-407
• /
• 2005

This paper is to study globalization motives and strategies of Japanese and Korean industries by analyzing the causes and patterns of foreign direct investment (FDI) of the firms of the two countries during the 1980s and 1990s. First we develop a FDI function from the profit maximizing model of firms. Then we use regression analysis to determine internally driving-out factors and externally-inducing factors. Japanese FDI strategy has gone through three different stages; from natural resource-seeking investment in the 1950s and 1960s to market-expansion investment in the 1970s and 1980s and to a combination of cost-reducing (low-cost labor-seeking) investment and market-penetrating investment in the 1990s. On the other hand, Korean FDI behavior has gone through four different stages; from the learning stage with small investments in the 1970s, to natural resource-seeking investment in the early and mid 1980s, to the growth stage in the late 1980s and the early 1990s, to the maturity stage of the mid and late 1990s. The last two stages were characterized by a combination of cost-reducing investment and market-seeking investment. As a late comer, Korea began its FDI two decades later than Japan, but caught up the patterns of Japanese FDI by the mid 1990s and is in a competing position with Japan. Our findings show that both Japanese FDI and Korean FDI in Asia and other developing countries tendto be in labor-intensive sectors where their firms are losing their comparative advantages at home. The main motive for FDI into these regions is low-cost resource seeking. On the other hand, both Japanese FDI and Korean FDI in the U.S. and Europe tend to be knowledge-intensive sectors where Japanese and Korean firms attempt to internalize transaction and information costs by globalizing its production. The main motive for FDI into these regions is market-seeking. Firms in both countries have increased their investments in Mexico and Western and Eastern Europe in order to penetrate large economic blocs such as the EU and NAFTA area. Korean firms are more aggressive in expanding into new and untested markets than are their counterpart in Japan. Evidence of this can be seen in the scarcity of Japanese FDI and abundance of Korean FDI in Eastern Europe and China.

• Journal of Korea Spatial Information System Society
• /
• v.1 no.2 s.2
• /
• pp.63-80
• /
• 1999

This study presents NGDM(National Geospatial Information Distribution Model) in order to effectively utilize and differently apply geospatial information which is important in the dispersion of GIS. In order to establish the NGDM, this study draws the guideline of NGDM in Korea by analyzing its present condition of domestic and foreign geospatial information distribution. It also investigates some major factors forming the infrastructure of NGDM in regulative, technical, physical, and social aspects. Based on these factors, this study presents a three-staged NGDM that is applicable in Korea. The NGDM consists of four components that are the consumer, supplier, gateway for the clearinghouse and the clearinghouse of the geospatial information. According to the management form of geospatial information, the types of NGDM are classified as the concentration type, the distribution type, and compound type. Also, this study explains the mutual relationship between the NGDM's components and suggests a three-staged NGDM of planting, growth, and maturity period considering comparison results of classified models and development direction of regulation, protocol, communication network, electronic commerce, and etc.